고장을 고려한 공정평균 이동에 대한 조정시기 결정
Determination of Resetting Time to the Process Mean Shift with Failure
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
All machines deteriorate in performance over time. The phenomenon that causes such performance degradation is called deterioration. Due to the deterioration, the process mean of the machine shifts, process variance increases due to the expansion of separate interval, and the failure rate of the machine increases. The maintenance model is a matter of determining the timing of preventive maintenance that minimizes the total cost per wear between the relation to the increasing production cost and the decreasing maintenance cost. The essential requirement of this model is that the preventive maintenance cost is less than the failure maintenance cost. In the process mean shift model, determining the resetting timing due to increasing production costs is the same as the maintenance model. In determining the timing of machine adjustments, there are two differences between the models. First, the process mean shift model excludes failure from the model. This model is limited to the period during the operation of the machine. Second, in the maintenance model, the production cost is set as a general function of the operating time. But in the process mean shift model, the production cost is set as a probability functions associated with the product. In the production system, the maintenance cost of the equipment and the production cost due to the non-confirming items and the quality loss cost are always occurring simultaneously. So it is reasonable that the failure and process mean shift should be dealt with at the same time in determining the maintenance time. This study proposes a model that integrates both of them. In order to reflect the actual production system more accurately, this integrated model includes the items of process variance function and the loss function according to wear level.
Abstract
All machines deteriorate in performance over time. The phenomenon that causes such performance degradation is called deterioration. Due to the deterioration, the process mean of the machine shifts, process variance increases due to the expansion of separate interval, and the failure rate of the machine increases. The maintenance model is a matter of determining the timing of preventive maintenance that minimizes the total cost per wear between the relation to the increasing production cost and the decreasing maintenance cost. The essential requirement of this model is that the preventive maintenance cost is less than the failure maintenance cost. In the process mean shift model, determining the resetting timing due to increasing production costs is the same as the maintenance model. In determining the timing of machine adjustments, there are two differences between the models. First, the process mean shift model excludes failure from the model. This model is limited to the period during the operation of the machine. Second, in the maintenance model, the production cost is set as a general function of the operating time. But in the process mean shift model, the production cost is set as a probability functions associated with the product. In the production system, the maintenance cost of the equipment and the production cost due to the non-confirming items and the quality loss cost are always occurring simultaneously. So it is reasonable that the failure and process mean shift should be dealt with at the same time in determining the maintenance time. This study proposes a model that integrates both of them. In order to reflect the actual production system more accurately, this integrated model includes the items of process variance function and the loss function according to wear level.
참고문헌 (21)
- Arcelus, F. J., "Optimal Production Run for a Normally Distributed Quality Characteristics Exhibiting Non-Negative Shifts in Process Mean and Variance", IIE Transactions, 14(2), pp.90~98 (1982)
- Barlow, R., "Optimum Preventive Maintenance Policies", Operations Research, 8(1), pp.90~100 (1960)
- Ben-Daya, M., "The economic production lot-sizing problem with imperfect production processes and imperfect maintenance", International Journal of Production Economics, 76(3), pp.257~264 (2002)
- Boyles, R. A., "The Taguchi Capability Index", Journal of Quality Technology, 23(1), pp.17~26 (1991)
- Chen, C.H, "Determining the optimum process mean based on Asymmetric Quality Loss Function and Rectifying Inspection Plan", IEEE : Industrial Engineering Management Conference, pp.1080~1084 (2004)
- Gibra, I. N., "Optimal Control Processes Subject to Linear Trends", The Journal of Industrial Engineering, 18, pp.35~41 (1967)
- Hunter W. G., "Determining the Most Profitable Target Value for a Production Process", Journal of Quality Technology, 9(4), pp.176~180 (1977)
- Kamat, S. J., "A Smoothed Bayes Control of a Variable Quality Characteristic with Linear Shift", Journal of Quality Technology, 8(2), pp.98~104 (1976)
- 이도경, "Cpm+ 기준에서의 공정평균이동에 대한 재조정 기간 결정", 한국산업경영시스템학회지, 41(1), pp.110~117 (2018), 한국산업경영시스템학회[DOI]
- 이재훈, "공정평균의 변화율이 정규분포인 제조공정의 최적 목표값", 품질경영학회지, 38(4), pp.540~548 (2010), 한국품질경영학회
- Liao, G. -L., "Optimal economic production quantity policy for imperfect process with imperfect repair and maintenance", European Journal of Operational Research, 195(2), pp.348~357 (2009)
- Makis, V., "Optimal tool replacement with asymmetric quadratic loss", IIIE Transaction, 28(6), pp.463~466 (1996)
- Manuele, J., "Control Chart for Determining Tool Wear", Industrial Quality Control, 1(6), pp.7~10 (1945)
- Park, K. S., "Optimal Wear-Limit Replacement with Wear Dependent Failures", IEEE Transactions on Reliability, 37(3), pp.293~294 (1988)
- Pierskalla. W. P., "A Survey of Maintenance Models : The Control of Surveillance of Deteriorating System", Naval Research Logistics Quarterly, 23(3), pp.353~338 (1976)
- Porteus, E. L., "Optimal lot sizing, process quality improvement and setup cost reduction", Operations Research, 34(1), pp.137~144 (1986)
- Rahim, M. A., "Integrated Model for Determining the Optimal Initial Settings of the Process Mean and the Optimal Production Run Assuming Quadratic Loss Functions", International Journal of Production Research, 42(16), pp.3281~3300 (2004)
- Rosenblatt, M. J., "Economic production cycles with imperfect production processes", IIE Transactions, 18(1), pp.48~55 (1986)
- Springer, C. H., "A Method for Determining the Most Economic Position of a Process Mean", Industrial Quality Control, 8, pp.36~39 (1951)
- Sule, D. R., "Determination of Coordinated Maintenance Scheduling Frequencies for a Group of Machines", AIIE Transactions, 11(1), pp.540~548 (1979)
- Valdez-Flores, C., "A Survey of Preventive Maintenance Models for Stochastically Deteriorating Single-Unit System", Naval Research Logistics, 36(4), pp.419~446 (1989)