포신 내경 측정시스템 개선을 통한 공정품질 향상
Process Quality Improvement through Improving Measurement System for Internal Diameter of Gun Barrel
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Purpose: The variation of the internal diameters of gun barrel incurs a lot of reworks in gun barrel manufacturing process and the significant quality problem of gun barrel. And it is likely to stem from the current measurement system for the internal diameter of gun barrel and the related manufacturing process as well. The purpose of this study is to improve the gun barrel manufacturing process through improving measurement system. Methods: The improved measurement system using laser can measure the internal diameters of gun barrel more accurately, and the properly adjusted honing process reduces the variation of internal diameters of gun barrel. Results: Comparing the mean square error of internal diameters for 6 gun barrels measured before and after process improvement shows that the variation of gun barrel internal diameters was significantly reduced after the process improvement. Conclusion: The introduction of improved measurement system for the internal diameters of gun barrel and the adjustment of related honing process results in the reduction of reworks of gun barrels and their internal diameter variations.
Abstract
Purpose: The variation of the internal diameters of gun barrel incurs a lot of reworks in gun barrel manufacturing process and the significant quality problem of gun barrel. And it is likely to stem from the current measurement system for the internal diameter of gun barrel and the related manufacturing process as well. The purpose of this study is to improve the gun barrel manufacturing process through improving measurement system. Methods: The improved measurement system using laser can measure the internal diameters of gun barrel more accurately, and the properly adjusted honing process reduces the variation of internal diameters of gun barrel. Results: Comparing the mean square error of internal diameters for 6 gun barrels measured before and after process improvement shows that the variation of gun barrel internal diameters was significantly reduced after the process improvement. Conclusion: The introduction of improved measurement system for the internal diameters of gun barrel and the adjustment of related honing process results in the reduction of reworks of gun barrels and their internal diameter variations.
참고문헌 (19)
- Chang, Myungjin., "Effect of Hone Stone on Accuracy of Honing in 2-Cycle Engine Cylinder Having Open Hole", Journal of the Korean Society of Manufacturing Technology Engineers, 9(3), pp.143~149 (2000)
- 최천규, "6시그마 도입을 통한 EOP 측정시스템 개선 사례연구 : D사의 6시그마 활동 사례를 중심으로", 품질경영학회지, 34(3), pp.51~61 (2006), 한국품질경영학회
- 최인수, "GUM 기반 측정불확도의 평가 및 적용에 의한 품질개선", 품질경영학회지, 51(3), pp.419~434 (2023), 한국품질경영학회[DOI]
- 최인수, "측정 프로세스의 변동 요인 조사 방법 개발", 한국산업경영시스템학회지, 39(2), pp.72~81 (2016), 한국산업경영시스템학회
- Measurement System Analysis, "Defense Agency for Technology and Quality(DTaQ)", DTaQ, ~ (2010)
- 홍지수, "XAI(eXplainable Artificial Intelligence) 알고리즘 기반 사출 공정 수율 개선 방법론", 품질경영학회지, 51(1), pp.55~65 (2023), 한국품질경영학회[DOI]
- 장홍제, "고성능 차폐 콘크리트 블록을 위한 개선된 성능측정 시스템 연구", 전자공학회논문지, 57(11), pp.57~63 (2020), 대한전자공학회
- 전언찬, "대형선박용 연료공급관 가공공정 개선", 한국기계가공학회지, 9(5), pp.64~69 (2010), 한국기계가공학회
- 전주호, "Gage R&R을 통한 KVMF 디스플레이 시험 방법 검증 및 개선 사례 연구", 국방품질연구논집(JDQS), 3(1), pp.37~45 (2021), 국방기술품질원[DOI]
- 주영돈, "게이지 R&R과 성능지수를 이용한 측정시스템과 공정능력 평가 방법", 한국산업경영시스템학회지, 42(2), pp.78~85 (2019), 한국산업경영시스템학회[DOI]
- Kim, Gamlae., "The Development of Deformation System for Structure Using Laser Beam", Journal of the Korean Society of Civil Engineers, 19(3-4), pp.669~676 (1999)
- Korea Dictionary Research Publishing, "Honing", Mechanical Engineering Glossary, ~ (1995)
- Korean Agency for Technology and Standards, "General Requirements for the Competence of Testing and Calibration Laboratories. KS Q ISO", IEC 17025, 2019
- 이재우, "다목적 레이저 거리측정기(Laser Range Finder) 설계 및 개발", 한국산학기술학회논문지, 12(7), pp.3214~3219 (2011), 한국산학기술학회
- 이종현, "항공투하탄 충전 공정의 안전성 개선에 관한 연구", 국방품질연구논집(JDQS), 2(1), pp.82~91 (2020), 국방기술품질원[DOI]
- 서호진, "품질 4.0: 개념, 요소, 수준 평가와 전개 방향", 품질경영학회지, 49(4), pp.447~466 (2021), 한국품질경영학회[DOI]
- 소순진, "차량용 백색 LED 패키지의 색 좌표 품질 개선", 품질경영학회지, 50(3), pp.425~440 (2022), 한국품질경영학회[DOI]
- 유지원, "FDM 출력물의 표면 품질 향상을 위한 정삭 후가공 시 적층 및 정삭 공정 조건 사이의 상관관계 분석", 한국정밀공학회지, 39(2), pp.159~165 (2022), 한국정밀공학회[DOI]
- 윤장우, "작업부하 및 발열 모니터링에 의한 엔진블록 호닝스톤 연삭성 평가", 한국기계가공학회지, 18(4), pp.69~75 (2019), 한국기계가공학회[DOI]