GUM 기반 측정불확도의 평가 및 적용에 의한 품질개선
A Study on Quality Improvement by Evaluation and Application of GUM-based Measurement Uncertainty
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: Measurement results obtained under non-ideal measurement environment conditions may contain uncertain factors. As a result, the reliability of measurement results may be deteriorated. In this study, we tried to find ways to improve quality by evaluating and applying measurement uncertainty based on GUM. Methods: In the flatness measurement of semiconductor parts, uncertainty factors that could occur under actual environmental conditions of workers were derived, and measurement uncertainties were calculated, and methods for minimizing the main factors affecting the measurement results were analyzed. Results: Depending on the part and the coordinate measuring machine, it was shown that the effect of dispersion caused by repeated measurements as type A uncertainty and the effect of the calibration results of equipment as type B uncertainty have the main influence. Conclusion: Depending on the uncertainty factors of type A and type B and the influence of the total expanded uncertainty, the central value and confidence interval of the initial measurement results showed fluctuations. It is considered that analysis and measures for the main uncertainty factors are needed as quality improvement in the industrial field.
Abstract
Purpose: Measurement results obtained under non-ideal measurement environment conditions may contain uncertain factors. As a result, the reliability of measurement results may be deteriorated. In this study, we tried to find ways to improve quality by evaluating and applying measurement uncertainty based on GUM. Methods: In the flatness measurement of semiconductor parts, uncertainty factors that could occur under actual environmental conditions of workers were derived, and measurement uncertainties were calculated, and methods for minimizing the main factors affecting the measurement results were analyzed. Results: Depending on the part and the coordinate measuring machine, it was shown that the effect of dispersion caused by repeated measurements as type A uncertainty and the effect of the calibration results of equipment as type B uncertainty have the main influence. Conclusion: Depending on the uncertainty factors of type A and type B and the influence of the total expanded uncertainty, the central value and confidence interval of the initial measurement results showed fluctuations. It is considered that analysis and measures for the main uncertainty factors are needed as quality improvement in the industrial field.
참고문헌 (18)
- C. Hubsch, "Benefits and Limitations of Measurement Uncertainty Evaluation in Industrial Laboratories", Accreditation and Quality Assurance, 25(6), pp.547~554 (2020)
- David, F, "Good Practice Guide No. 41 CMM Measurement Strategies", NPL 49-73, ~ (2014)
- Artificial Intelligence and the Modern Productivity Paradox, "Erik, B", National Bureau of Economic Research, 23~51 (2018)
- H. Huang, "Practitioner’s Perspective on the GUM Revision, Part Ⅰ: Two Key Problems and Solutions", The International Journal of Metrology, pp.26~37 (2022)
- Hamed, T, "Validity and Reliability of the Research Instrument; How to Test the Validation of a Questionnaire", Survey in a Research, 2020, pp.5(3), 28~36
- "ISO", IEC GUIDE 98-3:2008 Uncertainty of Measurement – Part 3: Guide to the Expression of Uncertainty in Meas urement (GUM:1995), pp.4~25
- Jailton, C. D., "Methods for Evaluation of Measurement Uncertainty", Metrology, pp.9~26 (2018)
- 김민, "둔감탄약 시험의 측정불확도 산출 방안 연구", 품질경영학회지, 45(3), pp.533~546 (2017), 한국품질경영학회[DOI]
- "KS B ISO14253-2 Geometrical Product Specifications (GPS) ― Inspection by Measurement of Workpieces and Measuring Equipment ― Part 2: Guide to the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification", 15~22
- "KS Q ISO", IEC 17025. KOLAS-G-005. Conformity Assessment – General Requirements for the Competence of Testing and Calibration Laboratories, 2021
- 이승훈, "Type 1 Study, Gage R&R Study와 ISO 22514-7의 측정능력지수 간 연관성 분석", 품질경영학회지, 44(1), pp.77~94 (2016), 한국품질경영학회[DOI]
- 이승훈, "R을 이용한 KS Q ISO 22514-7 측정 프로세스 능력 분석용 프로그램", 품질경영학회지, 47(4), pp.713~723 (2019), 한국품질경영학회[DOI]
- M. Mendoza, "Advantages and Disadvantages of Measurement Uncertainty Evaluation in Chemical Analysis", Measurement, 116, pp.474~481 (2018)
- Artificial Intelligence and Economic Growth, "P. Aghion", National Bureau of Economic Research of Economic Research, 237~282 (2018)
- R. Pendrill, "Using Measurement Uncertainty in Decision-making and Conformity Assessment", Metrologia, 51, pp.S206~ (2014)[DOI]
- R. Shashidhar, "Thickness dependent studies of hetero-junction solar cell synthesized on quartz substrate by spray pyrolysis technique", Indian Journal of Pure & Applied Physics, 58, pp.36~43 (2019)
- Robert H. S., "Advances in Large-Scale Metrology – Review and Future Trends", Manufacturing Technology, 65(2), pp.643~665 (2016)
- W. Gao, "On-machine and In-proc-ess Surface Metrology for Precision Manufacturing", Manufacturing Technology, 68(2), pp.843~866 (2019)