표면개질에 의한 물방울 접촉각 변화를 이용하여 제작된 PDMS 마이크로 렌즈
Fabrication method of PDMS microlenses using water-based molding method
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper reports a new fabrication method of polydimethylsiloxane (PDMS) microlenses with various curvatures by using a water-based mold. The hydrophobic surface of Polypropylene (PP) substrate was modified by corona discharge using tesla coil to have hydrophilic surface. Then hydrophilic surface of PP substrate takes hydrophobic recovery to have various contact angles from less than 25 o to about 84 o. By using the water droplets with various contact angles as replica molds for PDMS process, we could obtain PDMS microlenses with various curvatures.
Abstract
This paper reports a new fabrication method of polydimethylsiloxane (PDMS) microlenses with various curvatures by using a water-based mold. The hydrophobic surface of Polypropylene (PP) substrate was modified by corona discharge using tesla coil to have hydrophilic surface. Then hydrophilic surface of PP substrate takes hydrophobic recovery to have various contact angles from less than 25 o to about 84 o. By using the water droplets with various contact angles as replica molds for PDMS process, we could obtain PDMS microlenses with various curvatures.
참고문헌 (12)
- 정귀상, "PDMS 몰드를 이용한 초고온 MEMS용 SiCN 미세구조물 제작과 그 특성", 센서학회지, 15(1), pp.53~57 (2006), 한국센서학회
- 윤광석, "바이오 멤스 및 마이크로 시스템 적용을 위한3차원 마이크로 유로 제작", 센서학회지, 15(5), pp.357~361 (2006), 한국센서학회
- S.-I. Chang, "Shape-controlled high fill-factor microlens arrays fabricated with a 3D diffuser lithography and plastic replication method", Optics Express, 12(25), pp.6366~6371 (2004)
- S. Park, "Fabricaton of poly (dimethyl- siloxane) microlens for laser-induced fluorescence detection", Jpn. J. Appl. Phys, 45(6B), pp.5614~5617 (2006)
- M.-H. Wu, "Fabrication of two-dimensional arrays of microlenses and their applications in photolithography", J. Micromech. Microeng, 12(6), pp.747~758 (2002)
- M.-K. Wei, "Method to evaluate the enhancement of luminance efficiency in planar OLED light emitting devices for microlens array", Optics Express, 12(23), pp.5777~5782 (2004)
- J. Chen, "Variable-focusing microlens with microfluidic chip", J. Micromech. Microeng, 14(5), pp.675~680 (2004)
- O.J. Cayre, "Fabrication of microlens arrays by gel trapping of self-assembled particle monolayers at the decane-water interface", J. Mater. Chem, 14, pp.3300~3302 (2004)
- H.J. Nam, "Close- packed hemispherical microlens array from two-dimensional ordered polymeric microspheres", Langmuir, 22, pp.7358~7363 (2006)
- T.-K. Shih, "Fabrication of PDMS (polydimethylsiloxane) microlens and diffuser using replica molding", Microelectronic Engineering, 83(11-12), pp.2499~2503 (2006)
- S.-H. Chao, "Rapid fabrication of microchannels using microscale plasma activated templating (μPLAT) generated water molds", Lab Chip, 7, pp.641~643 (2007)
- J. Karger-Kocsis, "Polypropylene An A-Z reference", pp.800~805 (1999), Kluwer Academic Publishers, Dordrecht