겹눈 모사 구조체에서 마이크로 렌즈의 높이가 빛의 수용각에 미치는 영향 연구
Effect of the Sag Height of a PDMS Microlens on the Acceptance Angle of an Artificial Compound Eye
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
입사하는 빛에 대한 수용각이 큰 인공 겹눈 구조를 제작하기 위해 마이크로 렌즈 어레이의 높이에 따라 곡면형 겹눈 구조체가 갖는 수용각과 이미징 특성을 분석하였다. 마이크로 렌즈의 반지름에 대한 높이인 h/r값을 조절함으로써 보다 큰 입사각을 갖는 빔이 마이크로 렌즈 어레이로 들어올 때도 여전히 빔을 포커싱하고 이미지를 맺을 수 있는 렌즈의 구조를 확인하였다. h/r값이 0.22에서 0.37로 증가할 때 겹눈 구조체의 수용각은 28.70°에서 49.02°로 증가하여 70.8%의 증가폭을 얻어낼 수 있었다. 뿐만 아니라 글자 F를 이미징한 결과, h/r값이 0.37일 때 메인 렌즈의 중심으로부터 23번째에 위치한 마이크로 렌즈에서도 글자가 선명하게 관찰되어 56.35°의 입사각을 갖는 빔에 대해서도 마이크로 렌즈 어레이가 이미지를 맺을 수 있음을 확인하였다.
Abstract
We have investigated the acceptance angle and imaging performance of a curved artificial compound eye (ACE), depending on the sag height of the microlens array to maximize its sensitivity to light. When the h/r values increased from 0.22 to 0.37, the acceptance angle of the curved ACE was expanded from 28.70° to 49.02°, which is an enhancement by 70.8%. With the designed optical system, it was demonstrated that a microlens locatedat the 23rd position from the center of the main lens could still focus an incident beam tilted at 56.35°, so that the letter F was clearly observed.
참고문헌 (26)
- B. Schoenemann, "Structure and function of a compound eye, more than half a billion years old", PNAS, 114, pp.13489~13494 (2017)
- D. -E. Nilsson, "A functional analysis of compound eye evolution", Arthropod Struct. Dev, 36, pp.373~385 (2007)
- T. H. Oakley, "On homology of arthropod compound eyes", Intergr. Comp. Biol, 43, pp.522~530 (2003)
- G. Lian, "Fabrication and characterization of curved compound eyes based on multifocal microlenses", Micromachines, 11, pp.854~ (2020)
- W. -K. Kuo, "Fabrication and characterization of artificial miniaturized insect compound eyes for imaging", Bioinspir. Biomim, 10, pp.056010~ (2015)
- M. Kaya, "Characteristics of corneal lens chitin in dragonfly compound eyes", Int. J. Biol. Macromol, 89, pp.54~61 (2016)
- J. Luo, "Rapid fabrication of curved microlens array using the 3D printing mold", Optik, 156, pp.556~563 (2018)
- K. Hamanaka, "An artificial compound eye using a microlens array and its application to scale-invariant processing", Opt. Rev, 3, pp.264~268 (1996)
- M. Wang, "A novel thermal reflow method for the fabrication of microlenses with an ultrahigh focal number", RSC Adv, 5, pp.35311~35316 (2015)
- S. G. Heo, "Large-area fabrication of microlens arrays by using self-pinning effects during the thermal reflow process", Opt. Express, 27, pp.3439~3447 (2019)
- T. Gu, "Bilayer liquid-filled compound microlens arrays : A way to compensate aberration", J. Appl. Phys, 128, pp.163101~ (2020)
- J. Tanida, "Color imaging with an integrated compound imaging system", Opt. Express, 11, pp.2109~2117 (2003)
- J. Duparré, "Thin compound-eye camera", Appl. Opt, 44, pp.2949~2956 (2005)
- H. Liu, "Fabrication of bioinspired omnidirectional and gapless microlens array for wide field-of-view detections", Appl. Phys. Lett, 100, pp.133701~ (2012)
- P. Zhou, "Fabrication of waterproof artificial compound eyes with variable field of view based on the bioinspiration from natural hierarchical micro-nanostructures", Nano-Micro Lett, 12, pp.166~ (2020)
- S. Huang, "Flexible fabrication of biomimetic compound eye array via two-step thermal reflow of simply pre-molded hierarchic microstructures", Opt. Commun, 393, pp.213~218 (2017)
- D. Wu, "Bioinspired fabrication of high-quality 3D artificial compound eyes by Voxel-modulation femtosecond laser writing for distortion-free wide-field-ofview imaging", Adv. Opt. Mater, 2, pp.751~758 (2014)
- J. Li, "Artificial compound eyes prepared by a combination of airassisted deformation, modified laser swelling, and controlled crystal growth", ACS Nano, 13, pp.114~124 (2019)
- P. Nussbaum, "Design, fabrication and testing of microlens arrays for sensors and microsystems", Pure Appl. Opt, 6, pp.617~636 (1997)
- Q. Zhang, "Fabrication of microlens arrays with high quality and high fill factor by inkjet printing", Adv. Opt. Mater, 10, pp.2200677~ (2022)
- K. Nagahashi, "Stable surface coating of silicon elastomer with phosphorylcholine and organosilane copolymer with cross-linking for repelling proteins", Colloids Surf. B : Biointerfaces, 134, pp.384~391 (2015)
- M. Zhang, "A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips", Lab Chip, 10, pp.1199~1203 (2010)
- Z. Deng, "Dragonfly-eye-inspired artificial compound eyes with sophisticated imaging", Adv. Funct. Mater, 26, pp.1995~2001 (2016)
- Y. Zhai, "High numerical aperture imaging systems formed by integrating bionic artificial com-pound eyes on a CMOS sensor", Opt. Mater. Express, 11, pp.1824~1834 (2021)
- J. Li, "Fabrication of artificial compound eye with controllable field of view and improved imaging", ACS Appl. Mater. Interfaces, 12, pp.8870~8878 (2020)
- D. Keum, "Planar emulation of natural compound eyes", Small, 8, pp.2169~2173 (2012)