굴곡 진동모드를 이용한 초음파 선형 압전 액추에이터 개발
Development of ultrasonic linear piezoelectric actuator with flexuralvibration mode
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper represents a piezoelectric ultrasonic linear actuator with flexural vibration mode. The actuator is composed of two piezo ceramics, the elastic body, and the connecting tip. It is driven by the frictional force between the connecting tip and the linear motion guide. Unimorph actuators have flexural vibration. Its middle point is fixed so that suitable to the flexural vibration of 3/2％. These vibrations contribute to elliptical motion by mixed mode between longitudinal and transverse mode. It was generated when the ultrasonic electrical signals with 90 degree phase difference are applied to two ceramics. A linear movement can be easily obtained using the elliptical motion. The ATILA, FEM simulator has been used to design actuator and verify the kinetic and dynamic analysis. We used the ceramics of 20×10×1 mm size and confirmed the flexural vibration of the 3/2％ at the 79 kHz through the scanning of 3D-vibrometer. The maximum velocity of actuator was 221 mm/sec and the thrust force of actuator was 2.7 N in 200Vp-p of additional voltage.
Abstract
This paper represents a piezoelectric ultrasonic linear actuator with flexural vibration mode. The actuator is composed of two piezo ceramics, the elastic body, and the connecting tip. It is driven by the frictional force between the connecting tip and the linear motion guide. Unimorph actuators have flexural vibration. Its middle point is fixed so that suitable to the flexural vibration of 3/2％. These vibrations contribute to elliptical motion by mixed mode between longitudinal and transverse mode. It was generated when the ultrasonic electrical signals with 90 degree phase difference are applied to two ceramics. A linear movement can be easily obtained using the elliptical motion. The ATILA, FEM simulator has been used to design actuator and verify the kinetic and dynamic analysis. We used the ceramics of 20×10×1 mm size and confirmed the flexural vibration of the 3/2％ at the 79 kHz through the scanning of 3D-vibrometer. The maximum velocity of actuator was 221 mm/sec and the thrust force of actuator was 2.7 N in 200Vp-p of additional voltage.
참고문헌 (16)
- K. Uchino, "New Electrostrictive Materials II", Elect. CeramicsII, 3, pp.67~71 (1980)
- K. Uchino, "New electrostrictive materials", Jpn. J. Appl. Phys., 20, pp.225~ (1981)
- T. Sashida, "An Introduction to ultrasonic motors", pp.6~8 (1993), Clarendon
- S. Ueha, "Ultrasonic Motors : Theory and Applications", pp.4~6 (1993), Clarendon
- K. Uchino, "Piezoelectric motors for camera modules", proceedings, Actuator, pp.157~160 (2008)
- K. Uchino, "Piezoeelectric actuators 2008 - Key Factorsfor commercialization", proceedings, Actuator, ezoelectric materials and application in actuators, pp.107~112 (2008)
- M. Klubal, "A novel motor concept based on piezoelectric bending actuators", 5th international workshop on piezoelectric materials and application in actuators (2008)
- 김정순, "압전 횡효과를 이용한 무지향성 주파스가변 초음파트랜스듀서", 센서학회지, 13(6), pp.417~423 (2004), 한국센서학회
- 정우석, "전방향성 선형 압전 액추에이터의 설계와 분석", 센서학회지, 18(3), pp.185~189 (2009), 한국센서학회
- 오정석, "초정밀 위치결정 을 위한 이중 서보 제어용 미세 구동 메커니즘", 한국정밀공학회, 추계학술대회 논문집, pp.249~254 (1994)
- 이동성, "이중서보제어루프를 통한 서 모모터 압전구동기의 초정밀위치결정 시스템개발", 한국 정밀공학회, 추계학술대회 논문집, pp.437~441 (1997)
- 김종윤, "Micro stage와 global stage를 결합 한 초정밀 2축 이동 장치 개발", 한국 정밀공학회 추계 학술대회 논문집, pp.300~304 (2001)
- Q. Wang, "Non-linear piezoelectric behavior of ceramic bendFiging mode actuators under strong electric fields", Journal of Applied Physics, 86, pp.3352~3360 (1999)
- Q. Wang, "Electromechanical coupling and output e_ciency of piezoelectric bending actuators", IEEE Trans. on Ultrasonics, Ferro. And Freq. Control, 46, pp.638~646 (1999)
- E. heinonen, "Characterization and modelling of 3D piezoelectric ceramic structures with ATILA software", Journal of the European Ceramic Society, 25(12), pp.2467~2470 (2005)
- 고현필, "ATILA를 이용한 소형 선 형 압전 모터의 설계", 전기전자재료학회, 18(12), pp.18~26 (2005)