Characteristics of a Titanium-oxide Layer Prepared by Plasma Electrolytic Oxidation for Hydrogen-ion Sensing
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The characteristics of a titanium oxide layer prepared using a plasma electrolytic oxidation (PEO) process were investigated, using an extended gate ion sensitive field effect transistor (EG-ISFET) to confirm the layer’s capability to react with hydrogen ions. The surface morphology and element distribution of the PEO-processed titanium oxide were observed and analyzed using field-emission scanning-electron microscopy (FE-SEM) and energy-distribution spectroscopy (EDS). The titanium oxide prepared by the PEO process was utilized as a hydrogen-ion sensing membrane and an extended gate insulator. A commercially available n-channel enhancement MOSFET (metal-oxide-semiconductor FET) played a role as a transducer. The responses of the PEO-processed titanium oxide to different pH solutions were analyzed. The output drain current was linearly related to the pH solutions in the range of pH 4 to pH 12. It was confirmed that the titanium-oxide layer prepared by the PEO process could feasibly be used as a hydrogen-ion-sensing membrane for EGFET measurements.
Abstract
The characteristics of a titanium oxide layer prepared using a plasma electrolytic oxidation (PEO) process were investigated, using an extended gate ion sensitive field effect transistor (EG-ISFET) to confirm the layer’s capability to react with hydrogen ions. The surface morphology and element distribution of the PEO-processed titanium oxide were observed and analyzed using field-emission scanning-electron microscopy (FE-SEM) and energy-distribution spectroscopy (EDS). The titanium oxide prepared by the PEO process was utilized as a hydrogen-ion sensing membrane and an extended gate insulator. A commercially available n-channel enhancement MOSFET (metal-oxide-semiconductor FET) played a role as a transducer. The responses of the PEO-processed titanium oxide to different pH solutions were analyzed. The output drain current was linearly related to the pH solutions in the range of pH 4 to pH 12. It was confirmed that the titanium-oxide layer prepared by the PEO process could feasibly be used as a hydrogen-ion-sensing membrane for EGFET measurements.
참고문헌 (22)
- P. Bergveld, "Development of an Ion-Sensitive Solid-State Device for Neurophysiological Measurements", IEEE Trans. Biomed. Eng., BME-17, pp.70~71 (1970)
- B. -K. Sohn, "A new pH-ISFET based dissolved oxygen sensor by employing electrolysis of oxygen", Sens. Actuators, B, 34(1-3), pp.435~440 (1996)
- B. -K. Sohn, "ISFET glucose and sucrose sensors by using platinum electrode and photo-crosslinkable polymers", Sens. Actuators, B, 41(1-3), pp.7~11 (1997)
- L. -S. Park, "Effect of membrane structure on the performance of field-effect transistor potassium-sensitive sensor", Sens. Actuators, A, 57(3), pp.239~243 (1996)
- P. Bergveld, "Thirty years of ISFETOLOGY : What happened in the past 30 years and what may happen in the next 30 years", Sens. Actuators, B, 88(1), pp.1~20 (2003)
- M. J. Schöning, "Recent advances in biologically sensitive field-effect transistors(BioFETs)", Analyst, 127(9), pp.1137~1151 (2002)
- V. Pachauri, "Biologically sensitive fieldeffect transistors : from ISFETs to NanoFETs", Essays Biochem., 60(1), pp.81~90 (2016)
- M. Kaisti, "Detection principles of biological and chemical FET sensors", Biosens. Bioelectron., 98, pp.437~448 (2017)
- K. B. Parizi, "ISFET pH Sensitivity : Counter-Ions Play a Key Role", Sci. Rep., 7, pp.41305(1)~41305(10) (2017)
- 이상권, "Extended Gate를 이용한 MOSFET형 단백질 센서 제작 및 특성", 센서학회지, 16(2), pp.104~109 (2007), 한국센서학회
- Y. Cui, "Nanowire nanosensors for highly sensitive and selective detection of biological and chemical species", Science, 293(5533), pp.1289~1292 (2001)
- E. Stern, "Label-free immunodetection with CMOS-compatible semiconducting nanowires", Nature, 445, pp.519~522 (2007)
- S. Xu, "Graphene foam field-effect transistor for ultra-sensitive label-free detection of ATP", Sens. Actuators, B, 284, pp.125~133 (2019)
- X. Lu, "Plasma electrolytic oxidation coatings with particle additions – A review", Surf. Coat. Technol, 307-C, pp.1165~1182 (2016)
- Z. Yao, "Growth characteristics of plasma electrolytic oxidation ceramic coatings on Ti–6Al–4V alloy", Appl. Surf. Sci., 254(13), pp.4084~4091 (2008)
- X. Lu, "Influence of particle additions on corrosion and wear resistance of plasma electrolytic oxidation coatings on Mg alloy", Surf. Coat. Technol., 352, pp.1~14 (2018)
- A. L. Yerokhin, "Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti-6Al-4V alloy", Surf. Coat. Technol., 130(2-3), pp.195~206 (2000)
- K. Gangwar, "Friction stir welding of titanium alloys : A review", Mater. Des., 141, pp.230~255 (2018)
- S. Aliasghari, "Plasma electrolytic oxidation of titanium in a phosphate", silicateelectrolyte and tribological performance of the coatings, 2014, pp.316, 463~476
- R. R. Boyer, "An overview on the use of titanium in the aerospace industry", Mater. Sci. Eng., A, 213(1-2), pp.103~114 (1996)
- W. Bunjongpru, "Very low drift and high sensitivity of nanocrystal-TiO2 sensing membrane on pHISFET fabricated by CMOS compatible process", Appl. Surf. Sci., 267, pp.206~211 (2013)
- B. G. Streetman, "Solid State Electronic Devices", pp.283~285 (2006), Pearson Prentice Hall