Microstructure of Titania Layers Formed by Plasma Electrolytic Oxidation (PEO) Method
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Titania coatings were prepared on commercially pure Ti by plasma electrolytic oxidation (PEO) method with various electrolytes and process condition. Coatings were formed under galvanostatic condition with several current density values, and the change of applied voltage with process time was recorded. The microstructure of the titania coatings was observed using XRD, SEM, TEM, and the time-voltage diagrams were analyzed in terms of microstructure evolution
Abstract
Titania coatings were prepared on commercially pure Ti by plasma electrolytic oxidation (PEO) method with various electrolytes and process condition. Coatings were formed under galvanostatic condition with several current density values, and the change of applied voltage with process time was recorded. The microstructure of the titania coatings was observed using XRD, SEM, TEM, and the time-voltage diagrams were analyzed in terms of microstructure evolution
참고문헌 (12)
- A. L. Yerokhin, "Surf. Coat. Tech.", 122(73) (1999)
- X. Nie, "Biomed. Mater. Res.", 57(612) (2001)
- A. L. Yerokhin, "Surf. Coat. Tech.", 182(78) (2004)
- O. P. Terleeva, "Mater. Trans. JIM", 4(2467) (2005)
- Yong Han, "Surf. Coat. Tech.", 168(249) (2003)
- H. Guo, "Mater. Lett.", 60(1538) (2006)
- M. Boinet, "Surf. Coat. Tech.", 199(141) (2005)
- V. Zwilling, "Electrochimica Acta", 45(921) (1999)
- X. Sun, "Thin Solid Film", 471(194) (2005)
- T. J. Webster, "Biomaterials", 21(1803) (2000)
- L. O. Snizhko, "Electrochimica Acta", 49(2085) (2004)
- H. Habazaki, "Corrosiom Sci", 45(2063) (2003)