Pt/CNT 전극 기반 전기화학식 센서의 전해질에 따른 황화수소 감지 특성
Hydrogen Sulfide Sensing Characteristics Depending on Electrolytes of Pt/CNT Liquid Electrochemical Sensors
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
With the recent development of industrial technology, the problem of odor due to leakage of toxic gas discharged from industrial complexes is gradually increasing. Among them, hydrogen sulfide is a colorless representative odorous substance that can cause pain through irritation of the mucous membranes of the eyes and respiratory tract, and is a gas that can cause central nervous system paralysis and suffocation when exposed to high concentrations. Therefore, in order to improve the odor problem, research on a gas sensor capable of quickly and reliably detecting a leak of hydrogen sulfide is being actively conducted. A lot of research has been done on the existing metal oxide-based hydrogen sulfide gas sensor, but it has the disadvantage of requiring low selectivity and high temperature operating conditions. Therefore, in this study, a Pt/CNT-based electrochemical hydrogen sulfide gas sensor capable of detecting at low temperatures with high selectivity for hydrogen sulfide was developed. A working electrode capable of selectively detecting only hydrogen sulfide was fabricated by synthesizing Pt nanoparticles as a catalyst on functionalized CNT and applied to an electrochemical hydrogen sulfide gas sensor. It was confirmed that the manufactured Pt/CNT-based electrochemical hydrogen sulfide gas sensor has a current change of up to 100uA for hydrogen sulfide, and the both response time and recovery time were within 15 seconds.
Abstract
With the recent development of industrial technology, the problem of odor due to leakage of toxic gas discharged from industrial complexes is gradually increasing. Among them, hydrogen sulfide is a colorless representative odorous substance that can cause pain through irritation of the mucous membranes of the eyes and respiratory tract, and is a gas that can cause central nervous system paralysis and suffocation when exposed to high concentrations. Therefore, in order to improve the odor problem, research on a gas sensor capable of quickly and reliably detecting a leak of hydrogen sulfide is being actively conducted. A lot of research has been done on the existing metal oxide-based hydrogen sulfide gas sensor, but it has the disadvantage of requiring low selectivity and high temperature operating conditions. Therefore, in this study, a Pt/CNT-based electrochemical hydrogen sulfide gas sensor capable of detecting at low temperatures with high selectivity for hydrogen sulfide was developed. A working electrode capable of selectively detecting only hydrogen sulfide was fabricated by synthesizing Pt nanoparticles as a catalyst on functionalized CNT and applied to an electrochemical hydrogen sulfide gas sensor. It was confirmed that the manufactured Pt/CNT-based electrochemical hydrogen sulfide gas sensor has a current change of up to 100uA for hydrogen sulfide, and the both response time and recovery time were within 15 seconds.
참고문헌 (14)
- I. H. Jung, "A case of hydrogen sulfide poisoning caused by unauthorized discharge of wastewater", J. Korean Soc. Occup. Environ. Med., pp.135~135 (2022)
- H. S. Gu, "Hydrogen gas sensors based on semiconductor oxide nanostructures", Sens, 12(5), pp.5517~5550 (2012)
- Y. F. Luo, "Hydrogen sensors based on noble metal doped metal-oxide semiconductor : A review", Inter. J. Hydrogen Energy, 42(31), pp.20386~20397 (2017)
- A. F. IM, "Hydrogen sulfide(H 2 S)gas sensor : A review", IEEE Sens. J, 19(7), pp.2394~2407 (2018)
- X. Y. Yang, "Nafion-based amperometric H2S sensor using Pt-Rh", C sensing electrode, 2018, pp.273, 635~641
- D. D. La, "Pt nanoparticle-supported multiwall carbon nanotube electrodes for amperometric hydrogen detection", Sens. Actuators B : Chem, 155(1), pp.191~198 (2011)
- J. Gębicki, "Application of ionic liquids in amperometric gas sensors", Crit. Rev. Anal. Chem, 46(2), pp.122~138 (2016)
- G. Schiavon, "Electrochemical detection of trace hydrogen sulfide in gaseous samples by porous silver electrodes supported on ionexchange membranes(solid polymer electrolytes)", Anal. Chem, 67(2), pp.318~323 (1995)
- R. Baron, "Amperometric gas sensors as a low cost emerging technology platform for air quality monitoring applications : A review", ACS Sens, 2(11), pp.1553~1566 (2017)
- P. Zuo, "A trace ppb-level electrochemical H2S sensor based on ultrathin Pt nanotubes", Talanta, 233, pp.122539~ (2021)
- J. Li, "H2S sensing properties of the SnO2-based thin films", Sens. Actuators B, 65, pp.111~113 (2000)
- A. M. Nima, "Evaluation of low-cost electro-chemical sensors for environmental monitoring of ozone, nitrogen dioxide, and carbon monoxide", J. Occup. Environ. Hyg, 15(2), pp.87~98 (2018)
- J. Gębicki, "Application of ionic liquids in amperometric gas sensors", Crit. Rev. in Anal. Chem, 46(2), pp.122~138 (2016)
- C. B. Yu, "Electrochemical H2S sensor with H2SO4 pre-treated Nafion membrane as solid polymer electrolyte", Sens. Actuators B:Chem., 86(2-3), pp.259~265 (2002)