팔라듐/탄소나노튜브 버키페이퍼를 이용한 상온감지 수소가스 센서
Room Temperature Hydrogen Gas Sensor using Pd/Carbon Nanotubes Buckypaper
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, we report the sensing performance of H2 gas sensors composed of Pd/carbon nanotube (CNT) buckypaper at room temperature. The CNT buckypaper was made using a simple filtration process and subsequently deposited with Pd as the sensing material. The sensitivity of the sensor increased with respect to the gas concentration. To investigate the effect of Pd thickness, Pd layers of different thickness were deposited on the buckypaper, and the response of the sensor was evaluated. The proposed sensor exhibits excellent sensing properties with optimized Pd thickness at room temperature (25oC). Pd nanoparticles significantly impact the sensitivity and selectivity of the sensor because of the spillover effect. In addition, the sensor is highly suitable for bendable and wearable devices owing to its structural flexibility.
Abstract
In this paper, we report the sensing performance of H2 gas sensors composed of Pd/carbon nanotube (CNT) buckypaper at room temperature. The CNT buckypaper was made using a simple filtration process and subsequently deposited with Pd as the sensing material. The sensitivity of the sensor increased with respect to the gas concentration. To investigate the effect of Pd thickness, Pd layers of different thickness were deposited on the buckypaper, and the response of the sensor was evaluated. The proposed sensor exhibits excellent sensing properties with optimized Pd thickness at room temperature (25oC). Pd nanoparticles significantly impact the sensitivity and selectivity of the sensor because of the spillover effect. In addition, the sensor is highly suitable for bendable and wearable devices owing to its structural flexibility.
참고문헌 (19)
- J. S. Noh, "Low-dimensional palladium nanostructures for fast and reliable hydrogen gas detection", Sensors, 11, pp.825~851 (2011)
- R. Chen, "A reliable and fast hydrogen gas leakage detector based on irreversible cracking of decorated palladium nanolayer upon aligned polymer fibers", Int. J. Hydrog. Energy, 40, pp.746~751 (2015)
- S. H. Lim, "Flexible palladium-based H2 sensor with fast response and low leakage detection by nanoimprint lithography", ACS Appl. Mater. Interfaces, 5, pp.7274~7281 (2013)
- D. Sett, "Highly enhanced H2 gas sensing characteristics of Co:ZnO nanorods and its mechanism", Sens. Actuators B, 243, pp.475~483 (2017)
- A. Gupta, "Hydrogen sensing based on nanoporous silica-embedded ultra dense ZnO nanobundles", RSC Adv, 4, pp.7476~7482 (2014)
- N. S. A. Eom, "Room-temperature H2 gas sensing characterization of graphene-doped porous silicon via a facile solution dropping method", Sensors, 17(12), pp.2750(1)~2750(7) (2017)
- Y. Seekaew, "Room temperature toluene gas sensor based on TiO2 nanoparticles decorated 3D graphene-carbon nanotube nanostructures", Sens. Actuators B, 279, pp.69~78 (2019)
- D. Jung, "Gas sensor using a multi-walled carbon nanotube sheet to detect hydrogen molecules", Sens. Actuators, 211, pp.51~54 (2014)
- R. Afrin, "Room temperature gas sensors based on carboxyl and thiol functionalized carbon nanotubes buckypapers", Diam. Relat. Mater., 60, pp.42~49 (2015)
- J. DeGraff, "Printable low-cost and flexible carbon nanotube buckypaper motion sensors", Mater. Des, 133, pp.47~53 (2017)
- J. Sippel-Oakley, "Carbon nanotube films for room temperature hydrogen sensing", Nanotechnology, 16, pp.2218~2221 (2005)
- A. Katoch, "Highly sensitive and selective H2 sensing by ZnO nanofibers and the underlying sensing mechanism", J. Hazard. Mater, 286, pp.229~235 (2015)
- S. Majumdar, "Enhanced performance of CNT", SnO2 thick film gas sensors towards hydrogen, 2014, pp.147, 79~85
- T. C. Lin, "Palladium nanoparticles modified carbon nanotube", nickel composite rods (Pd, Ni)for hydrogen sensing, pp.Sens. Actuators B, 2012[DOI]
- 강석창, "기공구조 조절 및 Pt촉매 증착을 이용한 다공성 탄소나노섬유의 수소가스 감지특성", 공업화학, 22(3), pp.243~248 (2011), 한국공업화학회
- T. Y. Chung, "Effects of oxygen functional groups on the enhancement of the hydrogen spillover of Pd-doped activated carbon", J. Colloid Interface Sci, 441, pp.98~105 (2015)
- E. H. Espinosa, "Hybrid metal oxide and multiwall carbon nanotube films for low temperature gas sensing", Sens. Actuator B, 207, pp.137~142 (2007)
- C. Ndaya, "Recent advances in palladium nanoparticles-based hydrogen sensors for leak detection", Sensors, 19, pp.4478(1)~4478(41) (2019)
- M. Chung, "Flexible hydrogen sensors using graphene with palladium nanoparticle decoration", Sens. Actuator B, 169, pp.387~392 (2012)