복합 단열 매트 보강 폴리우레탄 폼의 열적 성능 및 내충격성 평가
Thermal Performance and Impact Resistance Evaluations of Composite Insulation Mat Reinforced Polyurethane Foam
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구에서는 액화 천연 가스 운반선 단열 시스템에 적용되는 폴리우레탄 폼(Polyurethane foam, PUF)의 열적 성능 및 내충격성을 향상시키기 위한 목적으로, PUF에 복합 단열 매트를 보강하였다. 복합 단열 매트는 극저온 환경에서 운용이 가능한 케블라, 에어로겔, 그리고 크라이오겔 매트를 선정하였다. 열적 성능은 20oC의 상온에서 열전도율을 측정하였으며, 내충격성은 20oC의 상온 및 -163oC의 극저온에서 30 J의 충격에너지로 낙하 충격시험을 수행하여 측정하였다. 측정된 열전도율은 유효 열전도율 이론 값을 통해 보강되지 않은 PUF와 비교하였으며, 내충격성은 접촉력, 접촉 시간, 그리고 흡수에너지를 평가하였다. 실험 결과 크라이오겔 복합 매트 보강 시 가장 우수한 열적 성능을 나타났으며, 내충격성은 에어로겔 복합 매트 보강 시 가장 우수하게 나타났다.
Abstract
In the present study, composite insulation mat was reinforced over polyurethane foam (PUF) to improve the thermal performance and impact resistance of the PUF applied to the liquefied natural gas carrier insulation system. The composite insulation mat used Kevlar, aerogel, and cryogel composite mat that can be applied in a cryogenic environment. The thermal conductivity was measured at 20oC to investigate the thermal performance, and the drop impact test was carried out under impact energy of 30 J at 20oC, -163oC to investigate the impact resistance. The measured thermal performance was compared with neat PUF through effective thermal conductivity theoretical value. The shock resistance was evaluated of contact force, contact time, and absorb energy. In experimental results, cryogel composite mat was the best performance in terms of thermal performance, and aerogel composite mat was the best performance in terms of impact resistance.
참고문헌 (13)
- 배진호, "구조 복합재료 기반 이종재료 첨가시의 유리섬유의 열적 성능 평가에 대한 실험적 연구", 대한조선학회 논문집, 55(5), pp.448~455 (2018), 대한조선학회[DOI]
- 김정현, "LNG운반선 방열시스템에 적용되는 적층형 플라이우드의 극저온 기계적 특성 분석", 한국해양공학회지, 31(3), pp.241~247 (2017), 한국해양공학회[DOI]
- Yan, R., "Quasi-static and Dynamic Mechanical Responses of Hybrid Laminated Composites Based on High-density Flexible Polyurethane Foam", Composites Part B : Engineering, 83, pp.253~263 (2015)
- Berge, A., "Using High Performance Insulation in District Heating Pipes", 13th International Symposium on District Heating and Cooling, pp.156~162 (2012)
- Bardy, E., "Thermal Resistance and Compressive Strain of underWater Aerogel–syntactic Foam Hybrid Insulation at Atmospheric and Elevated Hydrostatic Pressure", Journal of Physics D : Applied Physics, 39(9), pp.1908~1918 (2006)
- Smith, T. M., "Fire and Engineering Properties of Polyimide-aerogel Hybrid Foam Composites for Advanced Applications", ACS Symposium Series, 1013, pp.148~173 (2009)
- McGee, S. D., "Predicting the Effect of Temperature on the Shock Absorption Properties of Polyethylene Foam", Packaging Technology and Science, 30(8), pp.477~494 (2017)
- 김지현, "Preparation and characterization of graphite foams", Journal of Industrial and Engineering Chemistry, 32, pp.21~33 (2015), 한국공업화학회[DOI]
- Quintana, J. M., "Thermomechanical Behavior of Sandwich Panels with Graphitic-foam Cores", Materials &Design, 135, pp.411~422 (2017)
- De Jaeger, P., "Assessing the Influence of Four Bonding Methods on the Thermal Contact Resistance of Open-cell Aluminum Foam", International journal of heat and mass transfer, 55(21-22), pp.6200~6210 (2012)
- Zhou, L., "Low-velocity Impact Properties of 3D Auxetic Textile Composite", Journal of Materials Science, 53(5), pp.3899~3914 (2018)
- Mozafari, H., "Finite Element Analysis of Foam-filled Honeycomb Structures under Impact Loading and Crashworthiness Design", International Journal of Crashworthiness, 21(2), pp.148~160 (2016)
- Gideon, R. K., "Characterizations of Basalt Unsaturated Polyester Laminates under Static Three‐point Bending and Low‐velocity Impact Loadings", Polymer Composites, 35(11), pp.2203~2213 (2014)