실리카 에어로겔을 첨가한 폴리머 폼의 기계적 특성
Mechanical Behavior of Polymer Foam Reinforced with Silica Aerogel
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In the present study, silica-aerogel-polyurethane foams were synthesized to improve the mechanical characteristics and insulation performance of the polyurethane foam applied to a liquefied natural gas carrier at a cryogenic temperature of -163℃. A silica-aerogel-polyurethane foam bulk was prepared using a homogenizer by varying the weight ratio of the silica aerogel (0, 1, 3, and 5 wt%), while maintaining the contents of the polyol, isocyanate, and blowing agent constant. Compression tests were performed at room and cryogenic temperatures to compare the mechanical properties of the silica-aerogel polyurethane foams. The internal temperature of the universal testing machine was maintained through the cryogenic chamber. The thermal conductivity of the silica-aerogel-polyurethane foam was measured using a heat flow meter to confirm the insulation performance. In addition, the effect of the silica aerogels on the cells of the polyurethane foam was investigated using FE-SEM and FTIR. From the experimental results, the 1 wt% silica aerogel polyurethane foam showed outstanding mechanical and thermal performances.
Abstract
In the present study, silica-aerogel-polyurethane foams were synthesized to improve the mechanical characteristics and insulation performance of the polyurethane foam applied to a liquefied natural gas carrier at a cryogenic temperature of -163℃. A silica-aerogel-polyurethane foam bulk was prepared using a homogenizer by varying the weight ratio of the silica aerogel (0, 1, 3, and 5 wt%), while maintaining the contents of the polyol, isocyanate, and blowing agent constant. Compression tests were performed at room and cryogenic temperatures to compare the mechanical properties of the silica-aerogel polyurethane foams. The internal temperature of the universal testing machine was maintained through the cryogenic chamber. The thermal conductivity of the silica-aerogel-polyurethane foam was measured using a heat flow meter to confirm the insulation performance. In addition, the effect of the silica aerogels on the cells of the polyurethane foam was investigated using FE-SEM and FTIR. From the experimental results, the 1 wt% silica aerogel polyurethane foam showed outstanding mechanical and thermal performances.
참고문헌 (15)
- Dorcheh, A. S., "Silica Aerogel; Synthesis, Properties and Characterization", Journal of Materials Processing Technology, 199(1), pp.10~26 (2008)
- 한대석, "The effects of glass fiber reinforcement on the mechanical behavior of polyurethane foam", Journal of Mechanical Science and Technology, 24(1), pp.263~266 (2010), 대한기계학회
- 김슬기, "폴리머 폼의 선박 및 해양구조물 적용을 위한 변형 회복 후 기계적 거동 특성 분석", 대한조선학회 논문집, 53(3), pp.195~200 (2016), 대한조선학회
- 김남현, "나노다공성 실리카 에어로겔 과립의 간단 제조", 공업화학, 22(2), pp.209~213 (2011), 한국공업화학회
- 이정호, "폴리우레탄 폼 비선형 압축 거동 해석용 온도 의존 손상 점소성 구성방정식", 한국전산구조공학회논문집, 29(5), pp.437~446 (2016), 한국전산구조공학회[DOI]
- 이정호, "폴리우레탄 폼의 비선형 압축거동을 모사하기 위한 밀도 영향이 고려된 수정 Gurson 모델의 제안", 한국전산구조공학회논문집, 28(5), pp.543~552 (2015), 한국전산구조공학회[DOI]
- Modesti, M., "Influence of Nanofillers on Thermal Insulating Properties of Polyurethane Nanocomposites Foams", Polymer Engineering & Science, 47(9), pp.1351~1358 (2007)
- Nazeran, N., "Synthesis and Characterization of Silica Aerogel Reinforced Rigid Polyurethane Foam for Thermal Insulation Application", Journal of Non-Crystalline Solids, 461(1), pp.1~1 (2017)
- 오경화, "초다공성 에어로겔 함유 섬유상 복합체의 흡음특성에 관한 연구", 한국섬유공학회지, 46(1), pp.48~54 (2009), 한국섬유공학회
- Park, S. B., "Polymeric Foams for Cryogenic Temperature Application:Temperature Range for Non-Recovery and Brittle-Fracture of Microstructure", Composite Structures, 136, pp.258~269 (2016)
- Park, S. B., "Effect of the Blowing Agent on the Low-Temperature Mechanical Properties of CO2- and HFC-245fa-Blown glass-Fiber-Reinforced Polyurethane Foams", Composites Part B, 93, pp.317~327 (2016)
- 박경우, "실리카 에어로겔", 고분자 복합재의 물리적 특성에 관한 연구, 2013, pp.62(9), 1318~1323[DOI]
- Venkataraman, M., "Aerogel Based Nanoporous Fibrous Materials for Thermal Insulation", Fibers and Polymers, 15(7), pp.1444~1449 (2014)
- 민문홍, "극초경량 실리카 에어로겔의 폴리우레탄 멤브레인 적용 특성", 한국염색가공학회지, 25(4), pp.279~286 (2013), 한국염색가공학회
- Zhao, C., "Preparation and Characterization of Granular Silica Aerogel", Polyiso Cyanurate Rigid Foam Composites, 2015, pp.93(15), 309~316