저 융점 바인더 복합화 및 압착공정을 통한 고강도 폴리에틸렌 테레프탈레이트(PET) 시트 개발
Development of High-strength Polyethylene Terephthalate (PET) Sheet Through Low Melting Point Binder Compounding and Compression Process
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 저 융점 폴리에틸렌 테레프탈레이트(PET) 섬유(Low melting PET fiber: LMF)가 복합화된 PET 시트의 고밀도화 공정을 통해 고강도 PET 시트를 제조하였다. 복합화된 LMF는 열처리 과정에서 용융되어 개개의 PET 섬유를 연결해 섬유간의 계면결합력을 향상시켰다. 또한 PET시트의 고밀도화는 거대기공밀도를 감소시키고 중첩된 PET 네트워크간의 결합력을 향상시켜 결과적으로 압축 전 LMF-PET 시트와 비교하여 연신율은 유지하면서 약 410% 향상된 인장강도를 보여주었다. 또한 강화된 결합력은 PET 섬유 네트워크의 수축을 방지하여우수한 치수안정성을 나타내었다.
Abstract
In the present study, a high-strength polyethylene terephthalate (PET) sheet was fabricated through a densification process of low melting PET fiber (LMF) combined PET sheet. During the thermal heat treatment process of the combined LMF, individual PET fiber was connected, which in turn leads to the improvement of the interfacial bonding force between the fibers. Also, the densification of the PET sheet leads to reduce macrospore density and in return could enhance the binding force between the overlapped PET networks. Consequently, the asprepared LMF-PET sheet showed about 410% improved tensile strength and the same elongation compared to before compression. Besides, the enhanced bonding force can prevent the shrinkage of the PET fiber network and exhibited excellent dimensional stability.
참고문헌 (21)
- 백영민, "열 성형 온도 및 시간에 따른 탄소섬유 강화 재활용 PET 복합재료의 계면 및 기계적 물성 비교", Composites Research, 30(3), pp.175~180 (2017), 한국복합재료학회
- Sun, S., "Facile Fabrication of Hydrolysis Resistant Phosphite Antioxidants for High-performance Optical PET films Via in situ Incorporation", Chemical Engineering Journal, 328(15), pp.406~416 (2017)
- 최순호, "RH-DMA를 적용한 PET 필름의 장기 점탄성 성능 예측", Composites Research, 32(6), pp.382~387 (2019), 한국복합재료학회
- Mallakpour, S., "Recycled PET", MWCNTZnO Quantum Dot Nanocomposites : Adsorption of Cd(II)ion, Morphology, Thermal and Electrical Conductivity Properties, 2017, pp.313(1), 873~881
- 이중규, "PET 필름의 이축연신에 따른 물성변화 연구", 폴리머, 34(6), pp.579~587 (2010), 한국고분자학회
- Joshi, A. S., "Effect of Biaxial Orientation on Microstructure and Properties of Renewable Copolymers of Poly(ethylene terephthalate) with 2,5-Furandicaboxylic Acid for Packing Application", ACS Applied Polymer Materials, 1(7), pp.1798~1810 (2019)
- Yoshida, H., "Influence of Voids on the Interlaminar Shear Strength of Carbon Fiber Reinforced Plastics", Advanced Composite Materials, 3(2), pp.113~122 (1993)
- 한성현, "RFI 공정 부품 비파괴검사용 표준 기공률 시편 제조 방법 및 기공률에 따른 기계적 물성 영향에 대한 연구", Composites Research, 32(6), pp.395~402 (2019), 한국복합재료학회
- Saenz-Castillo, D., "Effect of Processing Parameters and Void content on Mechanical Properties and NDI of Thermoplastic Composites", Composites Part A : Applied Science and Manufacturing, 121, pp.308~320 (2019)
- Zekriardehani, S., "Effect of Chain Dynamics, Crystallinity, and Free Volume on the Barrier Properties of Poly(ethylene terephthalate)Biaxially Oriented Films", Macromolecules, 50(7), pp.2845~2855 (2017)
- Liu, X., "Durable, Washable, and Flexible Conductive PET Fabrics Designed by Fiber Interfacial Molecular Engineering", Macromolecular Materials and Engineering, 301(11), pp.1383~1389 (2016)
- Sharma, S. K., "The Effect of Stretching Conditions on Properties of Amorphous Polyethylene Terephthalate Film", Journal of Applied Polymer Science, 34(6), pp.2231~2247 (1987)
- Rodríguez, A. G., "A Novel and Simple Method for Polyethylene Terephthalate(PET)Nanoparticle Production", Environmental Science : Nano, 6(7), pp.2031~2036 (2019)
- Crippa, M., "Chapter 12-PET Depolymerization : A Novel Process for Plastic Waste Chemical Recycling", Studies in Surface Science and Catalysis, 179, pp.215~229 (2019)
- 문재정, "고효율 전자파 차폐를 위한 이종금속 코팅 탄소섬유 개발", Composites Research, 33(4), pp.191~197 (2020), 한국복합재료학회[DOI]
- Zhang, Y., "Continuous Carbon Fiber", Crosslinkable Poly(ether ether ketone)Laminated Composites, Robust Solvent Resistance and Excellent Thermal Stability, 2018, pp.165(8), 148~153
- Park, O. -K., "Carbon Nanotube-Poly(vinyl alcohol)Hybrid Aerogels : Improvements in the Surface Area and Structural Stability by Internal Morphology Control", Composites Part B : Engineering, 144, pp.229~236 (2018)
- 한권형, "The Effects of Compatibilizers on the Morphological, Mechanical, and Optical Properties of Biaxially Oriented Poly(ethylene terephthalate)", Syndiotactic Polystyrene Blend Films, 2018, pp.26(3), 254~262[DOI]
- Kim, N. H., "Enhanced Mechanical Properties of a Multiwall Carbon Nanotube Attached Prestitched Graphene Oxide Filled Linear Low Density Polyethylene Composite", Journal of Materials Chemistry A, 2(8), pp.2681~2689 (2014)
- Kuila, T., "Resent Advances in Graphene based Polymer Composites", Progress in Polymer Science, 35(11), pp.1350~1375 (2010)
- Park, O. -K., "Mechanically Strong and Multifunctional Polyimide Nanocomposites using Aminophenyl Functionalized Graphene Nanosheets", Macromolecules, 46(9), pp.3505~3511 (2013)