실리콘 고무와 내열접착 향상을 위한 Polyethylene Terephthalate 섬유 접착층의 제조 및 특성
Treatment and Characterization of Polyethylene Terephthalate Fibers with Silicone Rubber Adhesive for Heat-Resistant Adhesion
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In case of pure rubber materials, the initial quality of the rubber materials would be excellent, however, the durability against external impact might be poor. In order to overcome the relatively low durability, textile cord could be employed with silicone rubber. We have studied the improvement of heat-resistant adhesion properties of silicone adhesives between silicone rubber and PET fibers by applying various conditions including dip solution recipe. The silicone rubber used was a platinum catalyst curing type and platinum catalyst type silicone adhesive was used as an adhesive to obtain an optimum adhesive force. Furthermore, the bonding mechanism between silicone and PET fiber was established.
Abstract
In case of pure rubber materials, the initial quality of the rubber materials would be excellent, however, the durability against external impact might be poor. In order to overcome the relatively low durability, textile cord could be employed with silicone rubber. We have studied the improvement of heat-resistant adhesion properties of silicone adhesives between silicone rubber and PET fibers by applying various conditions including dip solution recipe. The silicone rubber used was a platinum catalyst curing type and platinum catalyst type silicone adhesive was used as an adhesive to obtain an optimum adhesive force. Furthermore, the bonding mechanism between silicone and PET fiber was established.
참고문헌 (27)
- K. Stockelhuber, "Impact of Filler Surface Modification on Large Scale Mechanics of Styrene Butadiene", silica Rubber Composites, 2011, pp.44(11), 4366~
- 박수진, "고분자 복합재료의 계면특성", 폴리머, 29(3), pp.221~230 (2005), 한국고분자학회
- N. Mahyar, "Pull-out Analysis of Laser Modified Polyamide Tire Cords through Rubber Matrix", Engineering Failure Analysis, 80, pp.431~ (2017)
- R. Mahmoud, "Adhesion of Nitrile Rubber(NBR) to Polyethylene Terephthalate(PET) Fabric, Part 1: PET Surface Modification by Methylenediphenyldi-isocyanate(MDI)", Enginerring Failure Analysis, 360(1), pp.429~ (2016)
- S. Park, "AStudy onMechanical Interfacial Behaviors ofCarbonBlack-filled ElastomericMaterials via Adhesion Improvement", Rubber Technology, 18(1), pp.13~ (2017)
- S. Ata, "Influence ofMatching Solubility Parameter of Polymer Matrix and CNT on Electrical Conductivity of CNT", rubber Composite, 2014, pp.4, 7232~
- I. M. Ulfah, "Influence of Carbon Black and Silica Filler on the Rheological and Mechanical Properties of Natural Rubber Compound", Procedia Chem, 16, pp.258~ (2015)
- S. Kim, "Silicones forCoating, Present and Future", Prospectives of Industrial Chemistry, 3(6), pp.14~ (2000)
- A. L. Bloomfield, "Primer System for Bonding Conventional Adhesives and Coatings to Silicone Rubber", International J. of Adhesion and Adhesives, 68, pp.239~ (2016)
- T. Kim, "Single-walledCarbon Nanotube", silicone Rubber Composites for Compliant Electrodes, 2012, pp.50(2), 444~
- J. Lee, "Adhesion Performance and Recovery of Platinum Catalyzed Silicone PSAs under Various Temperature Conditions for Flexible Display Applications", Materials Letters, 208(1), pp.86~ (2017)
- D. Satas, "Handbook of Pressure Sensitive Adhesive Technology" (1999), Van Nostrand Reinhold
- S. Vecchiato, "Enzymatic Functionalization of HMLS-Polyethylene Terephthalate Fabrics Improves the Adhesion to Rubber", ACS Sustainable Chem. Eng, 5(8), pp.6456~ (2017)
- 원종성, "Primer 처리에 의한 폴리케톤 섬유", 천연고무 복합재료의 계면접착 및 내피로성, 2014, pp.51(2), 63~69[DOI]
- W. B. Datta, "Fibers Adhesion to Rubber Compound", Rubber Chem. Technol, 81(3), pp.523~ (2008)
- F. Colbrie, "New Enzymeswith Potential for PET SurfaceModification", Biocatal. Biotransform, 22(5-6), pp.341~ (2004)
- R. A. Meyers, "Encyclopedia of Physical Science and Technology Polymer" (2001), Academic Press
- W. Ma, "A NovelMethod ofModifying Poly(ethylene terephthalate) Fabric Using Supercritical Carbon Dioxide", J. of Applied Polymer Science, 117(4), pp.1897~ (2010)
- E. Alyamac, "Alkoxysilane Oligomer Modified Epoxide Primers", Progress in Organic Coatings, 74(1), pp.67~ (2012)
- B. X. Qiana, "ThermalDegradation and Flammability ofNovel Organic", inorganicEpoxyHybridsContainingOrganophosphorus-modified Oligosiloxane, 2013, pp.552(20), 87~
- R. Pilawka, "High-per-formance Isocyanate-epoxy Materials", Pigment and Resin Technology, 43(6), pp.332~ (2007)
- M. Flores, "Ytterbium Triflate as a New Catalyst on the Curing of Epoxy-isocyanate based Thermosets", Thermochimica Acta, 543(10), pp.188~ (2012)
- W. Chen, "Suppression Effect andMechanismof PlatinumandNitrogen Containing Silane on the Tracking and Erosion of Silicone Rubber for High-Voltage Insulation", ACS Appl. Mater. Interfaces, 8(32), pp.21039~ (2016)
- K. Indulekhaa, "Polycyclic Siloxanes: BaseResins forNovelHigh TemperatureResistant PlatinumCuring Transparent SiliconeAdhesives", International J. of Adhesion and Adhesives, 82, pp.254~ (2018)
- M. Gonzalez, "Applications of FTIRon EpoxyResins -Identification, Monitoring the Curing Process, Phase Separation andWaterUptake, Infrared Spectroscopy- Materials Science", Engineering and Technology, 13, pp.261~ (2012)
- E. Park, "Mechanical Properties andAntibacterialActivity of Peroxide-Cured Silicone Rubber Foams", J. of Applied Polymer Science, 110(3), pp.1723~ (2008)
- T. Chatterjee, "Exploring aNovelCyclicMono Functional Peroxide for Curing of Silicone Rubber at Elevated Temperature", Polymer Engineering and Science, 57(10), pp.1073~ (2017)