본문 바로가기
KERD
논문KCI 등재

정전 분무 공정을 이용한 Fecralloy 나노 입자가 코팅된 Fecralloy Foil의 제조

Fabrication of Fecralloy Foil Coated by Fecralloy Nanoparticles Using Electrospray Processing

0

조회

0

다운로드

3

인용

0

참고문헌

키워드

주제분류금속공학

초록

Fecralloy is the promising materials for high temperature exhaust filtering system due to the excellent its oxidation resistance property. In this research, Fecralloy nanoparticles coated Fecralloy thin foil was prepared by a single nozzle electrospray system in order to increase surface area of Fecralloy foil. Fecralloy nanoparticles were fabricated by electrical wire explosion method in ethanol using Fecralloy wires as a source material. Electrospray modes with applied D.C voltages to Fecralloy colloidal solution were investigated to make a stable cone-jet mode. Coated layers with and without additional heat treatment were observed by FE-SEM (field emission-scanning electron microscope) and tape test for evaluating their adhesion to substrate were performed as well.

Abstract

Fecralloy is the promising materials for high temperature exhaust filtering system due to the excellent its oxidation resistance property. In this research, Fecralloy nanoparticles coated Fecralloy thin foil was prepared by a single nozzle electrospray system in order to increase surface area of Fecralloy foil. Fecralloy nanoparticles were fabricated by electrical wire explosion method in ethanol using Fecralloy wires as a source material. Electrospray modes with applied D.C voltages to Fecralloy colloidal solution were investigated to make a stable cone-jet mode. Coated layers with and without additional heat treatment were observed by FE-SEM (field emission-scanning electron microscope) and tape test for evaluating their adhesion to substrate were performed as well.

참고문헌 (17)

  1. K. Ohno, , SAE world congress (2000)
  2. S. Ichikawa, , Ceramics, 38, pp.296~ (2003)
  3. N. Miyakawa, , SAE world congress (2003)
  4. J. Banhart, , Prog. Mater. Sci, 46, pp.559~ (2001)
  5. R. R. Unocic, , Mater. Sci. Eng. A, 483, pp.25~ (2008)
  6. C. J. Bennett, , Proc. R. Soc. Lond, A 439, pp.465~ (1992)
  7. M. V. Twing, "Structured Catalysts and Reactors", pp.59~ (1998), Marcel Dekker Inc
  8. P. Ávila, , Chem. Eng. J, 109, pp.1~ (2005)
  9. R. Houriet, , Mater. Res. Soc. Symp. Proc, 통권 : 526, pp.117~ (1998)
  10. R. Houriet, , Nano. Str. Mater, 11, pp.1155~ (1999)
  11. 박석주, "마이크로-필터 상에 금속 나노입자 코팅에 의한 나노구조 기공층 멤브레인 필터 개발", Korean Chemical Engineering Research(HWAHAK KONGHAK), 45(6), pp.591~595 (2007), 한국화학공학회
  12. 조영상, "Synthesis of Gold Nanoparticles by Chemical Reduction Method for Direct Ink Writing", 한국분말야금학회지, 17(5), pp.390~398 (2010), 한국분말야금학회
  13. S. N. Jayasinghe, , Appl. Phys. A, 80, pp.399~ (2005)
  14. A. Jaworek, , Powd. Technol, 176, pp.18~ (2007)
  15. A. Jaworek, , J. Electrostat, 66, pp.197~ (2008)
  16. J. Y. Yun, , Mater. Trans, 52, pp.250~ (2011)

관련 논문AI추천

대면적 Fecralloy 코팅층의 표면 거침도 극대화를 위한 정전분무 및 열처리 공정 연구구혜영, 박다희, 양상선, 윤중열, 이혜문, 정수호한국분말재료학회 · 한국분말재료학회지2017 · 제24권 제1호액중 전기선 폭발법에 의한 Ni-free Fe계 나노 합금분말의 제조: 1. 합금 wire의 직경 및 인가 전압의 영향공영민, 김병기, 김진천, 류호진, 손광욱, 윤중열, 이용희한국분말재료학회 · 한국분말재료학회지2011 · 제18권 제2호정전 분무법을 이용하여 제조된 Fe-Cr-Al 분말 다공체 금속의 고온 산화에 미치는 소결 온도의 영향공영민, 김병기, 오재성, 이기안한국분말재료학회 · 한국분말재료학회지2012 · 제19권 제6호액중 전기선 폭발법에 의한 Ni-free Fe계 나노 합금분말의 제조: 2. 용매의 영향 및 제조 방법에 따른 분말입자의 비교공영민, 김병기, 김진천, 류호진, 손광욱, 윤중열, 이용희한국분말재료학회 · 한국분말재료학회지2011 · 제18권 제2호정전 분무 공정으로 제조된 Fe-Cr-Al 분말 다공체 금속의고온 산화 특성에 미치는 기공 크기의 영향공영민, 김병기, 오재성, 이기안한국분말재료학회 · 한국분말재료학회지2014 · 제21권 제1호액중 전기선 폭발 공정을 이용한 Pt/alloy 하이브리드 나노입자의 제조 및 그 특성구혜영, 양상선, 윤중열, 이혜문한국입자에어로졸학회 · PARTICLE AND AEROSOL RESEARCH2012 · 제8권 제2호

이 간행물의 다른 논문 (13건)