액중 전기선 폭발법에 의한 Ni-free Fe계 나노 합금분말의 제조: 2. 용매의 영향 및 제조 방법에 따른 분말입자의 비교
Fabrication of Ni-free Fe-based Alloy Nano Powder by Pulsed Wire Evaporation in Liquid: Part 2. Effect of Solvent and Comparison of Fabricated Powder owing to Fabrication Method
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study investigated the effect of solvent on the fabrication of Ni-free Fe-based alloy nano powders by employing the PWE (pulsed wire evaporation) in liquid and compared the alloy particles fabricated by three different methods (PWE in liquid, PWE in Ar, plasma arc discharge), for high temperature oxidation-resistant metallic porous body for high temperature soot filter system. Three different solvents (ethanol, acetone, distilled water) of liquid were adapted in PWE in liquid process, while X-ray diffraction (XRD), field emission scanning microscope (FE-SEM), and transmission electron microscope (TEM) were used to investigate the characteristics of the Fe-Cr-Al nano powders. The alloy powder synthesized by PWE in ethanol has good particle size and no surface oxidation compared to that of distilled water. Since the Fe-based alloy powders, which were fabricated by PWE in Ar and PAD process, showed surface oxidation by TEM analysis, the PWE in ethanol is the best way to fabricate Fe-based alloy nano powder.
Abstract
This study investigated the effect of solvent on the fabrication of Ni-free Fe-based alloy nano powders by employing the PWE (pulsed wire evaporation) in liquid and compared the alloy particles fabricated by three different methods (PWE in liquid, PWE in Ar, plasma arc discharge), for high temperature oxidation-resistant metallic porous body for high temperature soot filter system. Three different solvents (ethanol, acetone, distilled water) of liquid were adapted in PWE in liquid process, while X-ray diffraction (XRD), field emission scanning microscope (FE-SEM), and transmission electron microscope (TEM) were used to investigate the characteristics of the Fe-Cr-Al nano powders. The alloy powder synthesized by PWE in ethanol has good particle size and no surface oxidation compared to that of distilled water. Since the Fe-based alloy powders, which were fabricated by PWE in Ar and PAD process, showed surface oxidation by TEM analysis, the PWE in ethanol is the best way to fabricate Fe-based alloy nano powder.
참고문헌 (16)
- KIPO, "Automotive Exhaust Gas After-treatment", pp.147~ (2004)
- KIPO, "Automotive Exhaust Gas After-treatment", pp.90~ (2004)
- Y. Park, , Ceramist, 10, pp.58~ (2007)
- "Alantum"[URL]
- J. Yun, , Particle and Aerosol Researc, 6, pp.38~ (2010)
- 김창규, "산화구리 나노분말을 포함하는 에틸렌글리콜 용액의 열전특성에 관한 연구", 한국분말야금학회지, 17(4), pp.276~280 (2010), 한국분말야금학회
- 박중학, "전기폭발법에 의한 Ni 및 Ni-Cu 나노 금속 분말의 제조와 자기적 특성연구", 한국분말야금학회지, 10(2), pp.83~88 (2003), 한국분말야금학회
- 이근희, "동시 전기 폭발법에 의한 나노 합금 분말 제조에 관한 연구 II-Fe-Al alloy 분말 제조", 한국분말야금학회지, 11(2), pp.105~110 (2004), 한국분말야금학회
- Dmitrii V. Tichonov, "Morphology, Phase Contents, and Chemical Composition of Nanopowders Produced by the Electrical Explosion of Tin-Lead Alloy Wires", 한국분말야금학회지, 10(3), pp.157~160 (2003), 한국분말야금학회
- 박제신, "전기선 폭발법으로 제조된 Al-Cu 합금 나노분말을 이용한 다공성 나노 입자 제조", 한국분말야금학회지, 15(3), pp.234~238 (2008), 한국분말야금학회
- 이창우, "전기폭발법에서 SMPS를 이용한 Cu 나노분말의 실시간 입자특성평가", 한국분말야금학회지, 10(4), pp.275~280 (2003), 한국분말야금학회
- 박은주, "유체 내 전기선폭발법에 의한 은 나노입자 유체의 제조 및 특성", 한국분말야금학회지, 16(3), pp.217~222 (2009), 한국분말야금학회
- H. Ryu, , J. Korean Powder Metall. Inst, 18 (2011)
- 박우영, "플라즈마 아크방전(PAD)법으로 제조된 FeAl 나노분말 특성", 한국분말야금학회지, 11(6), pp.522~527 (2004), 한국분말야금학회
- 박우영, "플라즈마 아크 방전법으로 제조된 Fe 나노분말의 미세조직에 미치는 챔버압력 영향", 한국분말야금학회지, 11(4), pp.328~332 (2004), 한국분말야금학회
- 이길근, "플라즈마 아크 방전법에서 Fe 나노 분말 형성에 미치는 공정변수의 영향", 한국분말야금학회지, 10(1), pp.51~56 (2003), 한국분말야금학회