계면활성제가 반도체 실리콘 CMP용 슬러리의분산안정성에 미치는 영향
Effect of Surfactant on the Dispersion Stability of Slurry for Semiconductor Silicon CMP
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The improvement of dispersion stability for the primary polishing slurry in a CMP process is achieved to prevent defects produced by agglomeration of the slurry. The dispersion properties are analyzed according to the physical characteristics of each silica sol sample. Further, the difference in the dispersion stability is confirmed as the surfactant content. The dispersibility results measured by Zeta potential suggest that the dispersion properties depend on the content and size of the abrasive in the primary polishing slurry. Moreover, the optimum ratio for high dispersion stability is confirmed as the addition content of the surfactant. Based on the aforementioned results, the long-term stability of each slurry is analyzed. Turbiscan analysis demonstrates that the agglomeration occurs depending on the increasing amount of surfactant. As a result, we demonstrate that the increased particle size and the decreased content of silica improve the dispersion stability and long-term stability.
Abstract
The improvement of dispersion stability for the primary polishing slurry in a CMP process is achieved to prevent defects produced by agglomeration of the slurry. The dispersion properties are analyzed according to the physical characteristics of each silica sol sample. Further, the difference in the dispersion stability is confirmed as the surfactant content. The dispersibility results measured by Zeta potential suggest that the dispersion properties depend on the content and size of the abrasive in the primary polishing slurry. Moreover, the optimum ratio for high dispersion stability is confirmed as the addition content of the surfactant. Based on the aforementioned results, the long-term stability of each slurry is analyzed. Turbiscan analysis demonstrates that the agglomeration occurs depending on the increasing amount of surfactant. As a result, we demonstrate that the increased particle size and the decreased content of silica improve the dispersion stability and long-term stability.
참고문헌 (18)
- G. B. Basim, , J. Colloid Interface Sci., 256, pp.137~ (2002)
- F. I., , Lubricants, 5, pp.15~ (2017)
- C. W. Liu, , J. Electrochem. Soc., 143, pp.716~ (1996)
- 최은석, "연마 Recycling 시간에 따른 콜로이드 실리카 슬러리의 안정성 및 연마속도", 한국세라믹학회지, 44(2), pp.98~102 (2007), 한국세라믹학회
- Y. M. Ahn, , Wear, 257, pp.785~ (2004)
- R. Dylla-Spears, , Colloids Surf., A, 447, pp.32~ (2014)
- J. M. Neirynck, , Thin Solid Films, 290-291, pp.447~ (1996)
- D. Ng, , J. Electrochem. Soc., 155, pp.H64~ (2008)
- B. P. Binks, , Langmuir, 23, pp.3626~ (2007)
- Z. Zhang, , Appl. Opt., 49, pp.5480~ (2010)
- O. Goncharuk, , Nano Res. Appl., 3, pp.29~ (2017)
- 변종민, "계면활성제를 이용하여 anatase TiO2 나노 입자와 결합된rutile TiO2 분말의 광촉매 특성", 한국분말재료학회지, 25(3), pp.257~262 (2018), 한국분말재료학회[DOI]
- M. G. De Paola, , IOP Conference Series: Mater. Sci. Eng., 251, pp.012122~ (2017)
- 조경숙, "광산란법에서 실리카 졸의 농도 및 표면특성이 입자 크기 및 전기영동 이동도 측정결과에 미치는 영향", Korean Chemical Engineering Research(HWAHAK KONGHAK), 51(5), pp.622~627 (2013), 한국화학공학회[DOI]
- 이지현, "초음파 분무 열분해 공정을 이용한 수계 SiO2 Sol로부터의 구형 SiO2 분말 합성", 한국재료학회지, 26(10), pp.570~576 (2016), 한국재료학회
- 정환경, "형광성 구조를 갖는 올리고머형 음이온성 계면 활성제 수용액에서 소수성 안료의 분산 안정성", 공업화학, 13(6), pp.558~564 (2002), 한국공업화학회
- J. Liu, , J. Hazard. Mater., 190, pp.214~ (2011)
- C. Celia, , Colloids Surf., B, 72, pp.155~ (2009)