P/M Fecralloy 성형체의 고온산화 및 전기저항 안정성에 미치는 SiO2 첨가 효과
The Effect of SiO2 addition on Oxidation and Electrical Resistance Stability at High-temperature of P/M Fecralloy Compact
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at 950oC for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and Al2O3 upon the addition of Si oxide. Si oxides promote the formation of Al2O3 and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.
Abstract
A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at 950oC for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and Al2O3 upon the addition of Si oxide. Si oxides promote the formation of Al2O3 and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.
참고문헌 (16)
- A. Bautista, , Corros. Sci., 45, pp.1343~ (2002)
- F. H. Stott, , Oxid. Met., 44, pp.113~ (1995)
- W. Howard, , J. Electrochem. Soc., 119, pp.1309~ (1972)
- A. Rahmel, , Oxid. Met., 38, pp.255~ (1992)
- T. Takalo, , Metall. Trans. A, 10, pp.1173~ (1979)
- J. G. Smeggil, , Metall. Trans. A, 17, pp.923~ (1986)
- S. J. Han, "Influence of Y element on the heat resistance of the Fe-Cr-Al alloy", M. S., pp.2015
- J. H. Hong, "The High-Temperature Oxidation Behavior of Stainless Steel by Powder Metallurgy", M.S., pp.2015
- P. Y. Hou, , Oxid. Met., 29, pp.323~ (1992)
- G. H. Meier, "Introduction to High Temperature Oxidation of Metals", pp.118~ (1983), Edward Amold
- A. V. C. Sobral, , Mater. Corros., 51, pp.791~ (2000)
- 이인섭, "AISI 316L강의 저온 플라즈마침질탄화처리 시 가스조성과 처리시간이 표면특성에 미치는 영향", 대한금속·재료학회지, 47(11), pp.716~721 (2009), 대한금속·재료학회
- F. H. Stott, , Oxide. Met., 31, pp.369~ (1989)
- J. Stringer, , Oxide Met., 5, pp.42~ (1972)
- 박진우, "P", M Fecralloy의 성형성 및 전기저항특성 향상에 관한 연구, 2016, pp.23(6), 426~431[DOI]
- 이종필, "STS 316L 소결체의 부식 저항 특성에 미치는 금속산화물 첨가의 영향", 한국분말야금학회지, 22(4), pp.271~277 (2015), 한국분말야금학회