페라이트/마르텐사이트계 산화물분산강화강의 미세조직 및 샤르피 충격특성에 미치는 코발트 함량의 영향
Effect of Cobalt Contents on the Microstructure and Charpy Impact Properties of Ferritic/martensitic Oxide Dispersion Strengthened Steel
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, the effects of Co content on the microstructure and Charpy impact properties of Fe-Cr-W ferritic/martensitic oxide dispersion strengthened (F/M ODS) steels are investigated. F/M ODS steels with 0–5 wt% Co are fabricated by mechanical alloying, followed by hot isostatic pressing, hot-rolling, and normalizing/tempering heat treatment. All the steels commonly exhibit two-phase microstructures consisting of ferrite and tempered martensite. The volume fraction of ferrite increases with the increase in the Co content, since the Co element considerably lowers the hardenability of the F/M ODS steel. Despite the lowest volume fraction of tempered martensite, the F/M ODS steel with 5 wt% Co shows the highest micro-Vickers hardness, owing to the solid solution-hardening effect of the alloyed Co. The high hardness of the steel improves the resistance to fracture initiation, thereby resulting in the enhanced fracture initiation energy in a Charpy impact test at – 40oC. Furthermore, the addition of Co suppresses the formation of coarse oxide inclusions in the F/M ODS steel, while simultaneously providing a high resistance to fracture propagation. Owing to these combined effects of Co, the Charpy impact energy of the F/M ODS steel increases gradually with the increase in the Co content.
Abstract
In this study, the effects of Co content on the microstructure and Charpy impact properties of Fe-Cr-W ferritic/martensitic oxide dispersion strengthened (F/M ODS) steels are investigated. F/M ODS steels with 0–5 wt% Co are fabricated by mechanical alloying, followed by hot isostatic pressing, hot-rolling, and normalizing/tempering heat treatment. All the steels commonly exhibit two-phase microstructures consisting of ferrite and tempered martensite. The volume fraction of ferrite increases with the increase in the Co content, since the Co element considerably lowers the hardenability of the F/M ODS steel. Despite the lowest volume fraction of tempered martensite, the F/M ODS steel with 5 wt% Co shows the highest micro-Vickers hardness, owing to the solid solution-hardening effect of the alloyed Co. The high hardness of the steel improves the resistance to fracture initiation, thereby resulting in the enhanced fracture initiation energy in a Charpy impact test at – 40oC. Furthermore, the addition of Co suppresses the formation of coarse oxide inclusions in the F/M ODS steel, while simultaneously providing a high resistance to fracture propagation. Owing to these combined effects of Co, the Charpy impact energy of the F/M ODS steel increases gradually with the increase in the Co content.
참고문헌 (14)
- P. Zheng, , Mater. Sci. Eng. A, 783, pp.139292~ (2020)
- Jong Min Byun, "Experimental Verification of the Decomposition of Y2O3 in Fe‑Based ODS Alloys During Mechanical Alloying Process", Metals and Materials International, 24(6), pp.1309~1314 (2018), 대한금속·재료학회[DOI]
- Y. Shi, , Mater. Sci. Eng. A, 774, pp.138937~ (2020)
- Xiaosheng Zhou, "Influence of Al Addition Upon the Microstructure and Mechanical Property of Dual‑Phase 9Cr‑ODS Steels", Metals and Materials International, 25(1), pp.168~178 (2019), 대한금속·재료학회[DOI]
- R. Lindau, , J. Nucl. Mater, 307-311, pp.769~ (2002)
- Z. Oksiuta, , J. Nucl. Mater, 386-388, pp.426~ (2009)
- J. Chao, , Mater. Des, 53, pp.1037~ (2014)
- L. Helis, , Mater. Sci. Eng. A, 510-511, pp.88~ (2009)
- T. Sourmail, , Comput. Mater. Sci, 34, pp.323~ (2005)
- K. Yamada, , ISIJ Int, 43, pp.1438~ (2003)
- 장기남, "The effect of cooling rates on carbide precipitate and microstructure of 9CR-1MO oxide dispersion strengthened(ODS) steel", Nuclear Engineering and Technology, 51(1), pp.249~256 (2019), 한국원자력학회[DOI]
- B. P. Sharoov, , Met. Sci. and Heat Treat, 19, pp.265~ (1977)
- Yoshiharu Mae, , Int. J. Mater. Sci. Appl, 6, pp.200~ (2017)
- G. Zhang, , Fusion Eng. Des, 89, pp.280~ (2014)