316H 스테인리스 강 위에 적층 제조된 순수 니켈층의 원소 확산거리 연구
Study on the Elemental Diffusion Distance of a Pure Nickel Layer Additively Manufactured on 316H Stainless Steel
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Molten salt reactors represent a promising advancement in nuclear technology due to their potential for enhanced safety, higher efficiency, and reduced nuclear waste. However, the development of structural materials that can survive under severe corrosion environments is crucial. In the present work, pure Ni was deposited on the surface of 316H stainless steel using a directed energy deposition (DED) process. This study aimed to fabricate pure Ni alloy layers on an STS316H alloy substrate. It was observed that low laser power during the deposition of pure Ni on the STS316H substrate could induce stacking defects such as surface irregularities and internal voids, which were confirmed through photographic and SEM analyses. Additionally, the diffusion of Fe and Cr elements from the STS316H substrate into the Ni layers was observed to decrease with increasing Ni deposition height. Analysis of the composition of Cr and Fe components within the Ni deposition structures allows for the prediction of properties such as the corrosion resistance of Ni.
Abstract
Molten salt reactors represent a promising advancement in nuclear technology due to their potential for enhanced safety, higher efficiency, and reduced nuclear waste. However, the development of structural materials that can survive under severe corrosion environments is crucial. In the present work, pure Ni was deposited on the surface of 316H stainless steel using a directed energy deposition (DED) process. This study aimed to fabricate pure Ni alloy layers on an STS316H alloy substrate. It was observed that low laser power during the deposition of pure Ni on the STS316H substrate could induce stacking defects such as surface irregularities and internal voids, which were confirmed through photographic and SEM analyses. Additionally, the diffusion of Fe and Cr elements from the STS316H substrate into the Ni layers was observed to decrease with increasing Ni deposition height. Analysis of the composition of Cr and Fe components within the Ni deposition structures allows for the prediction of properties such as the corrosion resistance of Ni.
참고문헌 (16)
- J. Serp, , Prog. Nucl. Energy, 77, pp.308~ (2014)
- K. O. Lee, , Nucl. Eng. Des, 417, pp.112824~ (2024)
- Wang Y, "Nuclear Power Reactor Designs", pp.163~183 (2024), Academic Press
- Gomes DDS, "OVERVIEW OF THE PHYSICAL PROPERTIES OF MOLTEN SALT REACTOR USING FLIBE", JER, 3, pp.2~12 (2023)[DOI]
- T. Ghaznavi, , J. Electrochem. Soc, 169, pp.061502~ (2022)
- F. -Y. Ouyang, , J. Nucl. Mater, 446, pp.81~ (2014)
- T. Ghaznavi, , Corros. Sci, 197, pp.110003~ (2022)
- C. M. Abreu, , Electrochem. Acta, 51, pp.2991~ (2006)
- M. Kondo, , Fusion Sci. Technol., pp.56~ (2009)
- A. I. Surenkov, , At. Energy, 124, pp.43~ (2018)
- V. Errico, , Surf. Coat. Technol, 429, pp.127965~ (2022)
- C. W. Park, , Mater. Lett, 337, pp.133936~ (2023)
- W. H. Kim, , J. Powder Mater, 29, pp.314~ (2022)
- J. Shao, , J. Alloys and Compd, 898, pp.162976~ (2022)
- S. Sanchez, , Int. J. Mach. Tools Manuf, 165, pp.103729~ (2021)
- K. Sridharan, , Molten Salts Chem., pp.241~ (2013)