Fe 함량에 따른 Ti-Mo-Fe 분말합금의 미세조직 및 기계적 특성 변화
Effect of Iron Content on Microstructure and Mechanical Properties of Ti-Mo-Fe P/M Alloys
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Beta-titanium alloys are used in many industries due to their increased elongation resulting from their BCC structure and low modulus of elasticity. However, there are many limitations to their use due to the high cost of betastabilizer elements. In this study, biocompatible Ti-Mo-Fe beta titanium alloys are designed by replacing costly betastabilizer elements (e.g., Nb, Zr, or Ta) with inexpensive Mo and Fe elements. Additionally, Ti-Mo-Fe alloys designed with different Fe contents are fabricated using powder metallurgy. Fe is a strong, biocompatible beta-stabilizer element and a low-cost alloying element. The mechanical properties of the Ti-Mo-Fe metastable beta titanium alloys are analyzed in relation to the microstructural changes. When the Fe content increases, the tensile strength and elongation decrease due to brittle fracture despite a decreasing pore fraction. It is confirmed that the hardness and tensile strength of Ti-5Mo-2Fe P/M improve to more than 360 Hv and 900 MPa, respectively
Abstract
Beta-titanium alloys are used in many industries due to their increased elongation resulting from their BCC structure and low modulus of elasticity. However, there are many limitations to their use due to the high cost of betastabilizer elements. In this study, biocompatible Ti-Mo-Fe beta titanium alloys are designed by replacing costly betastabilizer elements (e.g., Nb, Zr, or Ta) with inexpensive Mo and Fe elements. Additionally, Ti-Mo-Fe alloys designed with different Fe contents are fabricated using powder metallurgy. Fe is a strong, biocompatible beta-stabilizer element and a low-cost alloying element. The mechanical properties of the Ti-Mo-Fe metastable beta titanium alloys are analyzed in relation to the microstructural changes. When the Fe content increases, the tensile strength and elongation decrease due to brittle fracture despite a decreasing pore fraction. It is confirmed that the hardness and tensile strength of Ti-5Mo-2Fe P/M improve to more than 360 Hv and 900 MPa, respectively
참고문헌 (31)
- Y. J. Kim, , J. Powder Mater, 11, pp.265~ (2004)
- D. G. Lee, , Mater. Sci. Eng. A, 486, pp.19~ (2008)
- R. R. Boyer, , Adv. Perform. Mater, 2, pp.349~ (1995)
- G. Lütjering, "Titanium", pp.383~ (2007), Springer Berlin Heidelberg
- P. R Walker, , Biochemistry, 28, pp.3911~ (1989)
- N. Manam, , Mater. Sci. Eng. A, 701, pp.698~ (2017)
- Y. J. Hwang, , J. Nanosci. Nanotechnol, 19, pp.3811~ (2019)
- Y. Li, , Materials, 7, pp.1709~ (2014)
- A. Yasser, , Mater. Sci. Eng. C, 99, pp.552~ (2019)
- P. G. Allen, "Titanium ‘95 Science and Technology", proceedings of the Eighth World Conference on Titanium (1995), The Institue of Metals
- Y. T. Lee, "Titanium", Steel & Metal News Co. Ltd, 61~ (2009)
- M. Gepreel, , J. Mech. Behav. Biomed. Mater, 20, pp.407~ (2013)
- W.-F. Ho, , J. Alloys Compd, 464, pp.580~ (2008)
- D.-J. Lin, , Biomaterials, 28, pp.2582~ (2007)
- P. F. Santos, , Mater. Des, 110, pp.414~ (2016)
- Y. Bao, , J. Porous Mater, 21, pp.913~ (2014)
- V. Jindal, , Adv. Powder Technol, 30, pp.423~ (2019)
- H. Nakajima, "Diffusion in Titanium", ISIJ Int, 31, pp.757~ (1991)
- A. Carman, , Mater. Sci. Eng. A, 528, pp.1686~ (2011)
- O. Takeda, , JOM, pp.1981~ (2019)
- D. Santos, , Mater. Sci. Eng. A, 472, pp.193~ (2008)
- L. Bolzoni, , Met. Powder Rep, 74, pp.308~ (2019)
- D. Kuroda, , Mater. Sci. Eng. A, 243, pp.244~ (1998)
- M. Morinaga, , 1992Proc. of seventh world conf. on titanium, pp.217~ (1993)
- S. M. Shin, , Mater. Sci. Eng. A, 702, pp.173~ (2017)
- M. Abdel-Hady, , Scr. Mater, 55, pp.477~ (2006)
- J. O. Flynn, , J. Alloys Compd, 618, pp.437~ (2015)
- L. Meng, , Sci. Eng. A, 825, pp.141877~ (2021)
- J. Tiley, , Mater. Sci. Eng. A, 372, pp.191~ (2004)
- Y. Liu, , Mater. Sci. Eng. A, 418, pp.25~ (2006)
- S. Ehtemam-Haghighi, , J. Alloys Compd, 853, pp.156768~ (2021)