자기펄스성형이 적용된 Ti-Mn-Cu 합금의 미세구조 및 기계적 특성
Microstructure and Mechanical Property of Ti-Mn-Cu Alloys with Magnetic Pulsed Compaction
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Ti-based alloys are widely used in biomaterials owing to their excellent biocompatibility. In this study, Ti- Mn-Cu alloys are prepared by high-energy ball milling, magnetic pulsed compaction, and pressureless sintering. The microstructure and microhardness of the Ti-Mn-Cu alloys with variation of the Cu addition and compaction pressure are analyzed. The correlation between the composition, compaction pressure, and density is investigated by measuring the green density and sintered density for samples with different compositions, subjected to various compaction pressures. For all compositions, it is confirmed that the green density increases proportionally as the compaction pressure increases, but the sintered density decreases owing to gas formation from the pyrolysis of TiH2 powders and reduction of oxides on the surface of the starting powders during the sintering process. In addition, an increase in the amount of Cu addition changes the volume fractions of the α-Ti and β-Ti phases, and the microstructure of the alloys with different compositions also changes. It is demonstrated that these changes in the phase volume fraction and microstructure are closely related to the mechanical properties of the Ti-Mn-Cu alloys.
Abstract
Ti-based alloys are widely used in biomaterials owing to their excellent biocompatibility. In this study, Ti- Mn-Cu alloys are prepared by high-energy ball milling, magnetic pulsed compaction, and pressureless sintering. The microstructure and microhardness of the Ti-Mn-Cu alloys with variation of the Cu addition and compaction pressure are analyzed. The correlation between the composition, compaction pressure, and density is investigated by measuring the green density and sintered density for samples with different compositions, subjected to various compaction pressures. For all compositions, it is confirmed that the green density increases proportionally as the compaction pressure increases, but the sintered density decreases owing to gas formation from the pyrolysis of TiH2 powders and reduction of oxides on the surface of the starting powders during the sintering process. In addition, an increase in the amount of Cu addition changes the volume fractions of the α-Ti and β-Ti phases, and the microstructure of the alloys with different compositions also changes. It is demonstrated that these changes in the phase volume fraction and microstructure are closely related to the mechanical properties of the Ti-Mn-Cu alloys.
참고문헌 (22)
- K. -H. Frosch, , Eur. J. Trauma, 32, pp.148~ (2006)
- A. K. Shukla, , J. Alloys Compd, 389, pp.144~ (2005)
- D. Kuroda, , Mater. Sci. Eng. A, 243, pp.244~ (1998)
- A. A. Mazhar, , Corrosion, 44, pp.705~ (1988)
- N. Sumitomo, , J. Marer. Sci, 19, pp.1581~ (2008)
- M. Niinomi, , Mater. Sci. Eng. A, 243, pp.231~ (1998)
- W. Zhou, , Calphad, 71, pp.8~ (2020)
- Y. Zhang, , Regen. Biomater, 7, pp.120~ (2020)
- Y. Peng, , Solid State Commun, 318, pp.1~ (2020)
- P. F. Santos, , Acta Biomater, 26, pp.366~ (2015)
- 문승균, "Streptococcus mutans 에 대한 티타늄 합금 산화막의 광촉매 항균효과", 대한치과재료학회지, 35(4), pp.329~338 (2008), 대한치과재료학회
- E. Zhang, , Mater. Sci. Eng. C, 33, pp.4280~ (2013)
- F. Zhang, , J. Phys. Conf. Ser, 144, pp.012007~ (2009)
- M. Alqattan, , J. Mater. Res. Technol, 10, pp.1020~ (2021)
- M. Alqattan, , Regen Biomater, 1, pp.rbaa050~ (2020)
- Y. Hirooka, , J. Vac. Sci. Technol. A, 2, pp.16~ (1984)
- J. Y. Kim, , J. Am. Chem. Soc, 125, pp.10684~ (2003)
- 이한얼, "열처리 온도 및 분위기가 TiH2-WO3 혼합분말의 미세조직에 미치는 영향", 한국분말재료학회지, 24(1), pp.41~45 (2017), 한국분말재료학회[DOI]
- R. S. Martínez, , Mater. Lett, 277, pp.128382~ (2020)
- K. Kawahara, , Intermetallics, 17, pp.938~ (2009)
- Y. L. Kao, , Mater. Sci. Eng. A, 398, pp.93~ (2005)
- T. Yoshimura, , Mater. Sci. Forum, 654-656, pp.815~ (2010)