개선된 회귀착점 방법을 이용한 이방성 적층구조물의 소성해석
Analysis of Anisotropic Plasticity of Additively Manufactured Structure using Modified Return Mapping Method
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The plastic deformation behavior of additively manufactured anisotropic structures are analyzed using the finite element method (FEM). Hill’s quadratic anisotropic yield function is used, and a modified return-mapping method based on dual potential is presented. The plane stress biaxial loading condition is considered to investigate the number of iterations required for the convergence of the Newton-Raphson method during plastic deformation analysis. In this study, incompressible plastic deformation is considered, and the associated flow rule is assumed. The modified returnmapping method is implemented using the ABAQUS UMAT subroutine and effective in reducing the number of iterations in the Newton-Raphson method. The anisotropic tensile behavior is computed using the 3-dimensional FEM for two tensile specimens manufactured along orthogonal additive directions.
Abstract
The plastic deformation behavior of additively manufactured anisotropic structures are analyzed using the finite element method (FEM). Hill’s quadratic anisotropic yield function is used, and a modified return-mapping method based on dual potential is presented. The plane stress biaxial loading condition is considered to investigate the number of iterations required for the convergence of the Newton-Raphson method during plastic deformation analysis. In this study, incompressible plastic deformation is considered, and the associated flow rule is assumed. The modified returnmapping method is implemented using the ABAQUS UMAT subroutine and effective in reducing the number of iterations in the Newton-Raphson method. The anisotropic tensile behavior is computed using the 3-dimensional FEM for two tensile specimens manufactured along orthogonal additive directions.
참고문헌 (9)
- E. A. de Souza Neto, "Computational Methods for Plasticity: Theory and Applications" (2008), Wiley
- W. M. Scherzinger, , Comput. Methods Appl. Mech. Eng, 317, pp.526~ (2017)
- S.-Y. Yang, , NUMISHEET 2022, Proceedings of the 12th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp.3~ (2022)
- R. Wauthlea, , Addit. Manuf, 5, pp.77~ (2015)
- Ling-Chieh Shen, "Effects of Build Direction on the Mechanical Properties of a Martensitic Stainless Steel Fabricated by Selective Laser Melting", Materials, 13(22), pp.5142~ (2020), MDPI AG[DOI]
- R. Hill, "The Mathematical Theory Of Plasticity" (1998), Oxford Univ. Press
- R. Hill, , J. Mech. Phys. Solids, 35, pp.23~ (1987)
- R. D. Krieg, "Accuracies of Numerical Solution Methods for the Elastic-Perfectly Plastic Model", J. Pressure Vessel Technol, 99, pp.510~ (1977)
- "ABAQUS 6.13 Documentation", Dassault Systemes, ~