IN 939 W 합금의 소결 승온 속도에 따른 물리적 특성과 미세조직 분석
Evaluation of Mechanical Properties and Microstructure Depending on Sintering Heating Rate of IN 939W Alloy
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Changes in the mechanical properties and microstructure of an IN 939 W alloy according to the sintering heating rate were evaluated. IN 939 W alloy samples were fabricated by spark plasma sintering. The phase fraction, number density, and mean radius of the IN 939W alloy were calculated using a thermodynamic calculation. A universal testing machine and micro-Vickers hardness tester were employed to confirm the mechanical properties of the IN 939W alloy. X-ray diffraction, optical microscopy, field-emission scanning electron microscopy, Cs-corrected-field emission transmission electron microscopy, and energy dispersive X-ray spectrometry were used to evaluate the microstructure of the alloy. The rapid sintering heating rate resulted in a slightly dispersed γ' phase and chromium oxide. It also suppressed the precipitation of the η phase. These helped to reinforce the mechanical properties.
Abstract
Changes in the mechanical properties and microstructure of an IN 939 W alloy according to the sintering heating rate were evaluated. IN 939 W alloy samples were fabricated by spark plasma sintering. The phase fraction, number density, and mean radius of the IN 939W alloy were calculated using a thermodynamic calculation. A universal testing machine and micro-Vickers hardness tester were employed to confirm the mechanical properties of the IN 939W alloy. X-ray diffraction, optical microscopy, field-emission scanning electron microscopy, Cs-corrected-field emission transmission electron microscopy, and energy dispersive X-ray spectrometry were used to evaluate the microstructure of the alloy. The rapid sintering heating rate resulted in a slightly dispersed γ' phase and chromium oxide. It also suppressed the precipitation of the η phase. These helped to reinforce the mechanical properties.
참고문헌 (25)
- S. Yan, , Vacuum, 163, pp.194~ (2019)
- T. B. Gibbons, "High Temperature Alloys for Gas Turbines 1982", pp.369~ (1982)
- P. Cavaliere, "Spark plasma sintering of materials: advances in processing and applications" (2019), Springer
- O. F. Ogunbiyi, , Procedia Manuf, 35, pp.1324~ (2019)
- S. Pasebani, , Mater. Sci. Eng. A, 630, pp.155~ (2015)
- M. I. Makena, , J. Alloys Compd, 699, pp.1166~ (2017)
- B. J. Babalola, , J. King Saud Univ. Eng. Sci, 32, pp.198~ (2020)
- G. H. Gessinger, , Int. Mater. Rev, 19, pp.51~ (1974)
- 김송이, "방전플라즈마소결을 이용한 Ni계 비정질 복합재의 제조", 한국분말재료학회지, 20(1), pp.33~36 (2013), 한국분말재료학회
- N. Seo, , Powder Metall, 64, pp.180~ (2021)
- 김민상, "고엔트로피합금 분말야금재와 알루미늄 주조재 사이의 계면 반응 연구", 한국분말재료학회지, 29(3), pp.213~218 (2022), 한국분말재료학회
- N. Seo, , J. J. Powder Mater, 28, pp.103~ (2021)
- 김광훈, "소성유기마르텐사이트 변태에 의한 나노결정 FeCrC 소결합금의 기계적 강도 향상", 한국분말재료학회지, 28(3), pp.246~252 (2021), 한국분말재료학회
- 서남혁, "철계 비동일분율 고엔트로피 합금의 인장 강도에 미치는 소결 조건 영향", 한국분말재료학회지, 28(3), pp.221~226 (2021), 한국분말재료학회
- 전준협, "침탄 공정 대체를 위한 방전 플라즈마 소결 방법", 한국분말재료학회지, 29(3), pp.219~225 (2022), 한국분말재료학회
- G. Kim, , Arch. Metall. Mater, 66, pp.759~ (2021)
- 강동수, "일방향응고한 GTD-111 초내열합금의 황 함량에 따른 미세조직 및 고온 기계적 특성", 대한금속·재료학회지, 60(10), pp.782~792 (2022), 대한금속·재료학회[DOI]
- K. Kim, , Mater. Trans, 59, pp.1206~ (2018)
- 오승진, "Fe-7%Mn 합금의 오스테나이트 안정성에 미치는 밀링 시간과 공정제어제 첨가 효과", 한국분말재료학회지, 25(2), pp.126~131 (2018), 한국분말재료학회[DOI]
- D. Park, , Arch. Metall. Mater, 63, pp.1477~ (2018)
- S.-J. Oh, , Mater. Sci. Eng. A, 725, pp.382~ (2018)
- "Material Data Sheet, EOS NickelAlloy IN939"[URL]
- G. K. Bouse, , Structure, 8, pp.571~ (1996)
- K. Hagihara, , Acta Mater, 51, pp.2623~ (2003)
- Z. Miskovic, , Vacuum, 43, pp.709~ (1992)