해양 플로터 상부모듈 지지구조의 설계에 관한 연구
A Study of the Design for the Topside Module Support Structure of an Offshore Floater
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Offshore floater such as FPSO, drillship is composed of topside and hull side, and the interface structure is called topside module support. In this study, practical considerations were investigated for the design of topside module supports, from the concept design stage to the final stage of structural determination, in view of design efficiency and construction productivity. The effects of welding design factors of topside module support, such as welding throat thickness, sectional welding area, and welding man-hours, were compared and analyzed closely with respect to productivity. The current status and problems regarding the application of deep or full penetration welding are discussed, and a direct-calculation method is suggested as a possible solution to these problems.
Abstract
Offshore floater such as FPSO, drillship is composed of topside and hull side, and the interface structure is called topside module support. In this study, practical considerations were investigated for the design of topside module supports, from the concept design stage to the final stage of structural determination, in view of design efficiency and construction productivity. The effects of welding design factors of topside module support, such as welding throat thickness, sectional welding area, and welding man-hours, were compared and analyzed closely with respect to productivity. The current status and problems regarding the application of deep or full penetration welding are discussed, and a direct-calculation method is suggested as a possible solution to these problems.
참고문헌 (11)
- 방한서, "극후판 BoxColumn의 Corner Joint 용접시 발생하는 Lamella Tearing에관한 연구", 대한조선학회논문집, 36(4), pp.95~104 (1999)
- 방희선, "극후판 다층 FCAW 맞대기 용접부의 잔류응력 특성에 관한 연구", 한국해양공학회지, 24(2), pp.62~66 (2010), 한국해양공학회
- 심우승, "건조일정 단축을 위한 FPSO의피로 설계 최적화", 대한조선학회 추계학술대회, pp.902~907 (2004), 대한조선학회
- 이정훈, "피로강도를 고려한 FPSO 상갑판 부착구조의 배치에 관한 연구", 대한조선학회 춘계학술대회, pp.326~331 (2004), 대한조선학회
- 장태원, "대입열 용접에 의한 HAZ연화부를 갖는 극후판 용접이음부의 인장강도 평가", 대한용접·접합학회학술대회, pp.92~93 (2006)
- 하태민, "FPSO 선의 PAU SEAT 강도해석", 대한조선학회 특별논문집, pp.90~96 (2005)
- ABS, "Rules for Building and Classing Mobile Offshore Drilling Units, PART 3" (2001), Hull Construction and Equipment
- ABS, "Floating Offshore Installations, Guidance Notes for Structural Analysis of Hull Interface Structure", ~ (2006)
- DNV, "Offshore Standard DNV-OS-C101, Design of Offshore Steel Structures, General (LRFD Method)", ~ (2000)
- LR, "Rules for Regulations for the Classification of a Floating Offshore Installation at a Fixed Location", ~ (1999)
- Weaver,M.A, "Determination of Weld Loads and Throat Requirements Using Finite Element Analysis with Shell Element Models - A Comparison with Classical Analysis", Welding Journal, Welding Research Supplement, pp.1s~11s (1999)