FPSO Moon Pool 구조의 용접변형과 잔류응력에 관한 연구
A Study on the Weld-Induced Deformation and Residual Stress Analysis at FPSO Moon Pool Structure
0
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
Welding process generates distortion and residual stress in the weldment due to rapid heating and cooling. Welding distortion and residual stress in the welded structure result in many troubles such as dimensional inaccuracies in assembling and safety problem during service. The accurate prediction of welding residual stress is thus very important to improve the quality of weldment and find the way to reduce itself. This paper presents the simulation of welding-induced residual stress analysis to examine the cause of cracking in the SUS-overlay welding specimen at FPSO Moon Pool structure.
Abstract
Welding process generates distortion and residual stress in the weldment due to rapid heating and cooling. Welding distortion and residual stress in the welded structure result in many troubles such as dimensional inaccuracies in assembling and safety problem during service. The accurate prediction of welding residual stress is thus very important to improve the quality of weldment and find the way to reduce itself. This paper presents the simulation of welding-induced residual stress analysis to examine the cause of cracking in the SUS-overlay welding specimen at FPSO Moon Pool structure.
참고문헌 (10)
- Cary, H.B., "Modern Welding Technology, 4th Edition" (1997)
- Han, S.W, "A Study on the Thermal Deformation Characteristics a Thin Panels According to the Type of a Stiffener", 석사, pp.2009
- Jang, C.D, "Calculation of residual stresses by thermal elasto-plastic analysis", Journal of KWS, 6(4), pp.35~43 (1988)
- Kim, S.I, "Development of welding deformation control method for hull structure", 박사, pp.1999
- Kim, S.I, "Weld-induced Residual Stress Analysis to Examine the Cause of Cracking in the SUS-overlay Welding Specimen at FPSO Moon Pool Structure", 2006 Spring Annual Meeting of Korean Welding and Joining Society (2006)
- Lee, H.W, "A study on transverse weld cracks in 50mm thick steel plate with SAW process", Journal of Japan Welding Society, 15(4) (1997)
- Lee, J.T, "Study of the influence of increasing productivity through the implementation of the grand block unit system in ship construction", 박사, pp.2010
- Lee, T.S, "The characteristics of Near - threshold fatigue crack propagation for welding zone in TMCP high strength steels", Journal of ocean engineering and technology, 11(3), pp.39~47 (1997)
- Masubuchi, K, "Analysis of Welded Structures" (1980), Pergamon Press
- Yu, H.S, "A Study on Effect of PWHT in AH36-TMCP Steel", Journal of KWS, 16(6), pp.44~51 (1998)