저온용 고장력강(EH36)의 평균 응력 삼축비에 따른 파단 변형률 정식화
Formulation of Failure Strain according to Average Stress Triaxiality of ow Temperature High Strength Steel (EH36)
1
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
Stress triaxiality is recognized as one of the most important factors for predicting the failure strain of ductile metals. This study dealt with the effect of the average stress triaxiality on the failure strain of a typical low-temperature high-strength marine structural steel, EH36. Tensile tests were carried out on flat specimens with different notches, from relatively smooth to very sharp levels. Numerical simulations of each specimen were performed by using ABAQUS. The failure initiation points in numerical simulations were identified from a comparison of the engineering stress vs. strain curves obtained from experiments with simulated ones. The failure strain curves for various dimensionless critical energy levels were established in the average stress triaxiality domain and compared with the identified failure strain points. It was observed that most of the failure initiation points were approximated with a 100% dimensionless critical energy curve. It was concluded that the failure strains were well expressed as a function of the average stress triaxiality.
Abstract
Stress triaxiality is recognized as one of the most important factors for predicting the failure strain of ductile metals. This study dealt with the effect of the average stress triaxiality on the failure strain of a typical low-temperature high-strength marine structural steel, EH36. Tensile tests were carried out on flat specimens with different notches, from relatively smooth to very sharp levels. Numerical simulations of each specimen were performed by using ABAQUS. The failure initiation points in numerical simulations were identified from a comparison of the engineering stress vs. strain curves obtained from experiments with simulated ones. The failure strain curves for various dimensionless critical energy levels were established in the average stress triaxiality domain and compared with the identified failure strain points. It was observed that most of the failure initiation points were approximated with a 100% dimensionless critical energy curve. It was concluded that the failure strains were well expressed as a function of the average stress triaxiality.
참고문헌 (18)
- E8-04 Standard Test Methods for Tension Testing of Metallic Materials, "American Society for Testing and Materials(ASTM)", ASTM, ~ (2004)
- Bai, Y., "A New Model of Metal Plasticity and Fracture with Pressure and Lode Dependence", International Journal of Plasticity, 24, pp.1071~1096 (2008)
- Bai, Y., "Application of Extended Mohr-Coulomb Criterion to Ductile Fracture", International Journal of Fracture, 161, pp.1~20 (2010)
- Bao, Y., "On Fracture Locus in the Equivalent Strain and Stress triaxiality space", International Journal of Mechanical Sciences, 46, pp.81~98 (2004)
- Beese, A. M., "Effect of Stress Triaxiality and Lode Angle on the Kinetics of Strain-Induced Austeniteto-Martensite Transformation", Acta Materialia, 59(7), pp.2589~2600 (2011)
- Choung, J., "Comparative Studies of Fracture Models for Marine Structural Steels", Ocean Engineering, 36, pp.1164~1174 (2009)
- 정준모, "조선 해양 구조물용 강재의 소성 및 파단 특성 II: 파단의 이론적 배경", 한국해양공학회지, 25(2), pp.92~100 (2011), 한국해양공학회
- 정준모, "조선 해양 구조물용 강재의 소성 및 파단 특성 III: 파단 변형률에 관한 실험적 연구", 한국해양공학회지, 25(3), pp.53~65 (2011), 한국해양공학회
- Choung, J., "Estimation of Failure Strain of EH36 High Strength Marine Structural Steel using Average Stress Triaxiality", Marine Structures, 29, pp.1~21 (2012)
- Dunand, M., "On the Predictive Capabilities of the Shear Modified Gurson and the Modified Mohr-Coulomb Fracture Models over a Wide Range of Stress Triaxialities and Lode Angles", Journal of the Mechanics and Physics of Solids, 59, pp.1374~1394 (2011)
- Hancock, J. W., "On the Mechanisms of Ductile Failure in High-Strength Steels subjected to Multi-Axial Stress-States", Journal of the Mechanics and Physics of Solids, 24, pp.147~160 (1976)
- Lehmann, E., "On Ductile Rupture Criteria for Structural Tear in the Case of Ship Collision and Grounding", Proceedings of the 7th International Symposium on Practical Design of Ships and Mobile Units, pp.141~147 (1998)
- Luo, M., "Numerical Failure Analysis of a Stretch-Bending Test on Dual-Phase Steel Sheets using a Phenomenological Fracture Model", International Journal of Solids and Structures, 47, pp.3804~3102 (2010)
- Luo, M., "Experiments and Modeling of Anisotropic Aluminum Extrusions under Multi-Axial Loading - Part II: Ductile fracture", International Journal of Plasticity, 32-33, pp.36~58 (2012)
- McClintock F. A., "A Criterion of Ductile Fracture by the Growth of Holes", Journal of Applied Mechanics, 35, pp.363~371 (1968)
- Rice J. R., "On the Ductile Enlargement of Voids in Triaxial Stress Fields", Journal of the Mechanics and Physics of Solids, 17, pp.201~217 (1969)
- Törnqvist, R., "Design of Crashworthy Ship Structures", 박사, pp.2003
- Urban, J., "Crushing and Fracture of Lightweight Structures", 박사, pp.2003