선형 및 비선형 손상 발전 모델을 이용한 고장력강(EH36)의 연성 파단 예측
Ductile Fracture Predictions of High Strength Steel (EH36) using Linear and Non-Linear Damage Evolution Models
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A study of the damage evolution laws for ductile materials was carried out to predict the ductile fracture behavior of a marine structural steel (EH36). We conducted proportional and non-proportional stress tests in the experiments. The existing 3-D fracture strain surface was newly calibrated using two fracture parameters: the average stress triaxiality and average normalized load angle taken from the proportional tests. Linear and non-linear damage evolution models were taken into account in this study. A damage exponent of 3.0 for the non-linear damage model was determined based on a simple optimization technique, for which proportional and non-proportional stress tests were simultaneously used. We verified the validity of the three fracture models: the newly calibrated fracture strain model, linear damage evolution model, and non-linear damage evolution model for the tensile tests of the asymmetric notch specimens. Because the stress evolution pattern for the verification tests remained at mode I in terms of the linear elastic fracture mechanics, the three models did not show significant differences in their fracture initiation predictions.
Abstract
A study of the damage evolution laws for ductile materials was carried out to predict the ductile fracture behavior of a marine structural steel (EH36). We conducted proportional and non-proportional stress tests in the experiments. The existing 3-D fracture strain surface was newly calibrated using two fracture parameters: the average stress triaxiality and average normalized load angle taken from the proportional tests. Linear and non-linear damage evolution models were taken into account in this study. A damage exponent of 3.0 for the non-linear damage model was determined based on a simple optimization technique, for which proportional and non-proportional stress tests were simultaneously used. We verified the validity of the three fracture models: the newly calibrated fracture strain model, linear damage evolution model, and non-linear damage evolution model for the tensile tests of the asymmetric notch specimens. Because the stress evolution pattern for the verification tests remained at mode I in terms of the linear elastic fracture mechanics, the three models did not show significant differences in their fracture initiation predictions.
참고문헌 (28)
- "ASTM E8, Standard Test Methods of Tension Testing of Metallic Materials", American Society for Testing and Materials, ~ (2004)
- Bao, Y., "On Fracture Locus in the Equivalent Strain and Stress Triaxiality Space", International Journal of Mechanical Sciences, 46(1), pp.81~98 (2004)
- Bai, Y., "A New Model of Metal Plasticity and Fracture with Pressure and Lode Dependence", International Journal of Plasticity, 24(6), pp.1071~1096 (2008)
- Bai, Y., "Effect of loading history on necking and fracture", PhD, pp.2008
- Bai, Y., "Application of extended mohrcoulomb criterion to ductile fracture", International Journal of Fracture, 161, pp.1~20 (2010)
- Basu, S., "On the path-dependence of the fracture locus in ductile materials: Experiments", International Journal of Solids and Structures, 71, pp.79~90 (2015)
- Benzerga, A. A., "On the Pathdependence of the Fracture Locus in Ductile Materials-analysis", International Journal of Plasticity, 37, pp.157~170 (2012)
- Bridgman, P. W., "Studies in Large Plastic Flow and Fracture" (1952), McGraw-Hill
- 정준모, "조선 해양 구조물용 강재의 소성 및 파단 특성 III: 파단 변형률에 관한 실험적 연구", 한국해양공학회지, 25(3), pp.53~65 (2011), 한국해양공학회
- Choung, J., "Estimation of Failure Strain of EH36 High Strength Marine Structural Steel using Average Stress Triaxiality", Marine Structures, 29(1), pp.1~21 (2012)
- 정준모, "저온용 고장력강(EH36)의 평균 응력 삼축비에 따른 파단 변형률 정식화", 한국해양공학회지, 27(2), pp.19~26 (2013), 한국해양공학회
- 정준모, "상용 유한요소코드 사용자-서브루틴을 이용한 저온용 고장력강 (EH36)의 파단 시뮬레이션", 한국해양공학회지, 28(1), pp.34~46 (2014), 한국해양공학회
- Choung, J., "Failure Strain Formulation Via Average Stress Triaxiality of an High Strength Steel for Arctic Structures", Ocean Engineering, 91, pp.218~226 (2014)
- 정준모, "극한지용 고장력강의 평균 응력 삼축비 및 평균 정규 로드 파라메터를 고려한 3차원 파단 변형률 평면 개발: 제1부 이론적 배경과 실험적 연구", 한국해양공학회지, 29(6), pp.445~453 (2015), 한국해양공학회
- 정준모, "극한지용 고장력강의 평균 응력 삼축비 및 평균 정규 로드 파라메터를 고려한 3차원 파단 변형률 평면 개발: 제2부 파단 변형률 평면의 정식화", 한국해양공학회지, 29(6), pp.454~462 (2015), 한국해양공학회
- Coffin Jr., "The cyclic straining and fatigue of metals", Transactions of the Metallurgical Society of AIME, 215, pp.794~807 (1959)
- Cortese, L., "Prediction of ductile failure in materials for onshore and offshore pipeline applications", International Journal of Damage Mechanics, 23(1), pp.104~123 (2014)
- Fischer, F. D., "A Note On Calibration Of Ductile Failure Damage Indicators", International Journal of Fracture, 73(4), pp.345~357 (1995)
- Lemaitre, J, "A Continuous Damage Mechanics Model for Ductile Fracture", Journal of Engineering Materials and Technology, 107, pp.83~89 (1985)
- Lode, W., "Versuche über den Einfluss der mittleren Hauptspannung auf das Fliessen der Metalle", Eisen, Kupfer und Nickel, Z. Phys, 36, pp.913~939 (1926)
- Mohr, D., "Micromechanically-motivated Phenomenological Hosford-Coulomb Model For Predicting Ductile Fracture Initiation At Low Stress Triaxialites", International Journal of Solids and Structures, 67-68, pp.40~55 (2015)
- Osgood, C. C., "Fatigue Design" (1982), Pergamon Press
- 박성주, "3차원 파단 변형률 평면을 이용한 비보강 원판의 펀칭 파단 시뮬레이션", 한국해양공학회지, 30(6), pp.474~483 (2016), 한국해양공학회
- Papasidero, J., "Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao-Wierzbicki results revisited", International Journal of Solids and Structures, 69-70, pp.459~474 (2015)
- Rice J. R., "On the Ductile Enlargement of Voids in Triaxial Stress Fields", Journal of the Mechanics and Physics of Solids, 17, pp.201~217 (1969)
- Simulia, "Abaqus User Manual", Silumia, ~ (2008)
- Yu, H., "Effects of loading path on the fracture loci in a 3D space", Engineering Fracture Mechanics, 151, pp.22~36 (2016)
- Xue, L., "Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading", International Journal of Solids and Structures, 44, pp.5163~5181 (2007)