유체-입자 연성 운동에 의한 굽힘형 배관의 침식률 수치해석
Numerical Simulation of Erosion Rate on Pipe Elbow Using Coupled Behavior of Fluid and Particle
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
The erosion of solid particles in a pipe elbow was numerically investigated. A numerical procedure to estimate the sand erosion rate, as well as the particle motion, in the pipe elbow flow was introduced. This procedure was performed based on the combined empirical erosion model and computational fluid dynamics (CFD) analysis to consider the interaction between the particle motion and the eroded surface. The underlying turbulent flow on an Eulerian frame is described by the Reynolds averaged Navier-Stokes (RANS) equations with a k-ϵ turbulent model. The one-way coupled Eulerian-Lagrangian motion of the air flow and sand particles is employed to simulate the particle trajectories and particle-wall interactions on the pipe surfaces. The predicted CFD erosion magnitudes are compared with experimental data from pipe elbows. The erosion rate results do not reveal a good accordance between the simulation and experimental results. It seems that the CFD shows a slightly over-predicted erosion ratio.
Abstract
The erosion of solid particles in a pipe elbow was numerically investigated. A numerical procedure to estimate the sand erosion rate, as well as the particle motion, in the pipe elbow flow was introduced. This procedure was performed based on the combined empirical erosion model and computational fluid dynamics (CFD) analysis to consider the interaction between the particle motion and the eroded surface. The underlying turbulent flow on an Eulerian frame is described by the Reynolds averaged Navier-Stokes (RANS) equations with a k-ϵ turbulent model. The one-way coupled Eulerian-Lagrangian motion of the air flow and sand particles is employed to simulate the particle trajectories and particle-wall interactions on the pipe surfaces. The predicted CFD erosion magnitudes are compared with experimental data from pipe elbows. The erosion rate results do not reveal a good accordance between the simulation and experimental results. It seems that the CFD shows a slightly over-predicted erosion ratio.
참고문헌 (20)
- ANSYS, Inc, "Ansys CFX Realease 15.0 Therory Manual", ANSYS Inc, ~ (2015)
- Colwart, G., "Lessons Learned on Sand Control Failure and Subsequent Workover at Magnolia Deepwater Development", SPE, 2007, ~
- Chen, X., "Application and Experimental Validation of a Computational Fluid Dynamics (CFD)-based Erosion Prediction Model in Elbows and Plugged Tees", Computers and Fluids, 33(10), pp.1251~1272 (2004)
- Chen, X., "A Comprehensive Procedure to Estimate Erosion in Elbows for Gas", liquid, Journal of Energy Resources Technology, pp.2006, 128(1)[DOI]
- Deng, T., "Effect of Bend Orientation on Life and Puncture Point Location Due to Solid Particle Erosion of a High Concentration Flow in Pneumatic Conveyors", Wear, 258(1), pp.426~433 (2005)
- Recommended Practice RP 0501:Erosive Wear in Piping Systems, "Det Norske Veritas", Det Norske Veritas, ~ (1999)
- Finnie, I., "Erosion of Surfaces by Solid Particles", Wear, 3(2), pp.87~103 (1960)
- Grant, G., "Erosion Prediction in Turbomachinery Resulting from Environmental Solid Particles", Journal of Aircraft, 12(5), pp.471~478 (1975)
- An Experimental Investigation of the Erosive Characteristics of 2024 Aluminum Alloy (No. 73-37), "Grant, G.", Cinninnati Uvinersity of Department of Aerospace Engineering, ~ (1973)
- Haugen, K., "Sand erosion of Wear-resistant Materials: Erosion in Choke Valves", Wear, 186, pp.179~188 (1995)
- Liu, M., "Numerical Analyses of the Solid Particle Erosion in Elbows for Annular Flow", Ocean Engineering, 105, pp.186~195 (2015)
- Liu, M., "Similarity Criteria of the Solid Particle Erosion in Elbows between Model Experiments and Engineering for Dry Gas and Gas-mist flows", Wear, 360-361, pp.121~136 (2016)
- McLaury, B. S., "Generalization of API RP 14E for Erosive Service in Multiphase Production", SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers (1999)
- Parsi, M., "CFD Simulation of Sand Particle Erosion in Gas-dominant Multiphase Flow", Journal of Natural Gas Science and Engineering, 27, pp.706~718 (2015)
- Salama, M. M., "Evaluation of API RP 14E Erosional Velocity Limitations for Offshore Gas Wells", Offshore Technology Conference. Offshore Technology Conference (1983)
- Salama, M. M., "An Alternative to API 14E Erosional Velocity Limits for Sand-laden Fluids", Journal of Energy Resources Technology, 122(2), pp.71~77 (2000)
- Schiller, L., "A Drag Coefficient Correlation", Vdi Zeitung, 77(318), pp.51~ (1935)
- Versteeg, H.K., "An Introduction to Computational Fluid Dynamics: the Finite Volume Method" (2007), Pearson Education
- Vieira, R. E., "Experimental and Computational Study of Erosion in Elbows Due to Sand Particles in Air Flow", Powder Technology, 288, pp.339~353 (2016)
- Xianghui C., "Application and Experimental Validation of a Computational Fluid Dynamics (CFD)-Based Erosion Prediction Model in Elbows and Plugged Tees", Computers & Fluids, 33(10), pp.1251~1272 (2004)