30MW급 유동층 연소로 내부 비반응성 유동장 수치모사
Numerical Simulation of Non-reacting Flow Field inside a 30MW Circulating Fluidized Bed Combustor
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The non-reacting flow field and the movement of sand particles inside a 30MW circulating fluidized bed combustor is numerically simulated via the finite volume method. The primary air is supplied through 23x23 array of nozzles located on the bottom and the secondary air is supplied through 12 inlet pipes located on the side walls. The steady state velocity field shows that a very complex flow pattern is formed in the lower part of the combustor. As the gas moves upward, the velocity magnitude decreases and the gas exits the combustor after hitting the top wall. To investigate the behavior of sand particles with different diameters, a particle tracking calculation is performed by introducing sand particles continuously at the z=3 m plane. For the given air flow rate condition, sand particles smaller than 0.3 mm show a complex movement pattern near the secondary air inlet and then rise toward the outlet.
Abstract
The non-reacting flow field and the movement of sand particles inside a 30MW circulating fluidized bed combustor is numerically simulated via the finite volume method. The primary air is supplied through 23x23 array of nozzles located on the bottom and the secondary air is supplied through 12 inlet pipes located on the side walls. The steady state velocity field shows that a very complex flow pattern is formed in the lower part of the combustor. As the gas moves upward, the velocity magnitude decreases and the gas exits the combustor after hitting the top wall. To investigate the behavior of sand particles with different diameters, a particle tracking calculation is performed by introducing sand particles continuously at the z=3 m plane. For the given air flow rate condition, sand particles smaller than 0.3 mm show a complex movement pattern near the secondary air inlet and then rise toward the outlet.
참고문헌 (8)
- H. K. Lee, "A Study on Dynamic Simulation of Air-Gas Side in a Circulating Fluidized Bed Boiler", Proceedings of 2016 Spring Annual Conference of the Korean Society of Mechanical Engineers, pp.36~37 (2016)
- 김진호, "25W급 순환유동층반응기에서 석탄과 우드펠릿의 혼소 특성 연구", 대한기계학회논문집 B, 39(8), pp.683~691 (2015), 대한기계학회
- S. Kraft, "Optimization of a 50MW Bubbling Fluidized Bed Biomass Combustion Chamber by Means of Computational Particle Fluid Dynamics", Biomass and Bioenergy, 89, pp.31~39 (2016)[DOI]
- W. P. Adamczyk, "Generation of Data Sets for Semi-empirical Models of Circulated Fluidized Bed Boilers using Hybrid Euler-Lagrange Technique", Energy, 143, pp.219~240 (2018)[DOI]
- 강승모, "원추형 유동층 연소기의 수력학적 특성 및 열전달에 항력 모델이 미치는 영향에 대한 연구", 대한기계학회논문집 B, 39(11), pp.861~869 (2015), 대한기계학회
- ANSYS Inc, "ANSYS FLUENT Theory Guide Release 18.0" (2017)
- 조재혁, "태양열 에너지 저장탱크에서의 충진제 특성에 따른 열유동 해석", 한국기계기술학회지, 15(6), pp.955~959 (2013), 한국기계기술학회[DOI]
- 김진현, "사다리꼴 PEMFC 직선형 가스채널 내의 벽면 접촉각이 물 덩어리의 거동에 미치는 영향", 한국기계기술학회지, 19(5), pp.620~625 (2017), 한국기계기술학회[DOI]