동적이완법을 이용한 Steel Lazy Wave Riser의 정적형상 추정에 관한 수치해석적 연구
Numerical Study on Estimation of Static Configuration of Steel Lazy Wave Riser Using Dynamic Relaxation Method
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This paper presents an estimation method for the static configuration of a steel lazy wave riser (SLWR) using the dynamic relaxation method applied to estimate the configuration of structures with strong geometric non-linearity. The lumped mass model is introduced to reflect the flexible structural characteristics of the riser. In the lumped mass model, the tensions, shear forces, buoyancy, self-weights, and seabed reaction forces at nodal points are considered in order to find the static configuration of the SLWR. The dynamic relaxation method using a viscous damping formulation is applied to the static configuration analysis. Fictitious masses are defined at nodal points using the sum of the largest direct stiffness values of nodal points to ensure the numerical stability. Various case studies were performed according to the bending stiffness and size of the buoyancy module using the dynamic relaxation method. OrcaFlex was employed to validate the accuracy of the developed numerical method.
Abstract
This paper presents an estimation method for the static configuration of a steel lazy wave riser (SLWR) using the dynamic relaxation method applied to estimate the configuration of structures with strong geometric non-linearity. The lumped mass model is introduced to reflect the flexible structural characteristics of the riser. In the lumped mass model, the tensions, shear forces, buoyancy, self-weights, and seabed reaction forces at nodal points are considered in order to find the static configuration of the SLWR. The dynamic relaxation method using a viscous damping formulation is applied to the static configuration analysis. Fictitious masses are defined at nodal points using the sum of the largest direct stiffness values of nodal points to ensure the numerical stability. Various case studies were performed according to the bending stiffness and size of the buoyancy module using the dynamic relaxation method. OrcaFlex was employed to validate the accuracy of the developed numerical method.
참고문헌 (21)
- Barnes, M. R., "Form and Stress Engineering of Tension Structures", Structural Engineering review, 6(3), pp.175~202 (1994)
- A Note on Invariant Three-point Curvature Approximation, "Belyaev, A. G.", Singularity Theory and Differential Equations, 157~164 (1999)
- Day, A. S., "An Introduction to Dynamic Relaxation", The Engineer, 219, pp.218~221 (1965)
- Hall, M., "Validation of a Lumped-mass Mooring Line Model with DeeoCwind Semisubmersible Model Test Data", Ocean Engineering, 104, pp.590~603 (2015)
- Hüttner, M., "The Efficiency of Dynamic Relaxation Methods in Static Analysis of Cable Structures", Advances in Engineering Software, 89, pp.28~35 (2015)
- Jung, D. H., "Vibration of Highly Flexible Free Hanging Pipe in Calm Water", Ocean Engineering, 32(14), pp.1726~1739 (2005)
- Kim, S. J., "Fatigue Damage of Lazy-wave SCR for Deepwater Offshore Platforms", Journal of the Institute of Industrial Technology(Daejeon University), 27(1), pp.27~34 (2016)
- 이경수, "동적이완법에 의한 새로운 비선형해석법의 개발", 대한건축학회논문집 구조계, 24(7), pp.19~28 (2008), 대한건축학회
- Lewis, W. J., "Tension Structures: from and Behavior" (2003), Thomas Telford
- Masciola, M., "Extending the Capabilities of the Mooring Analysis Program: a Survey of Dynamic Mooring Line Theories for Integration into FAST", Proceedings of 33rd International Conference on Ocean, Offshore and Arctic Engineering (2014)
- Park, B. W., "Introduction on BOD(Basis of Design) for Concept Design of Steel Lazy Wave Riser", Proceedings of the Annual Autumn Meeting the Korean Society of Ocean Engineers, pp.370~375 (2017)
- Park, B. W., "A Study on the Initial Configuration of SLWR(Steel Lazy Wave Riser)Considering the Effect of Internal Fluid Density and Buoyancy Arrangement", Proceedings of the Joint Conference of the Korean Association of Ocean Science and Technology Societies (KAOSTS) (2018)
- 박규식, "OrcaFlex를 이용한 심해 SCR 구조 해석", 한국해양공학회지, 29(1), pp.16~27 (2015), 한국해양공학회
- Ruan, W., "Static Analysis of Deepwater Lazy-wave Umbilical on Elastic Seabed", Ocean Engineering, 91, pp.73~83 (2014)
- Ruan, W., "Nonlinear Dynamic Analysis of Deepwater Steel Lazy Wave Riser Subjected to Imposed Top-end Excitations", Proceedings of 35th International Conference on Ocean, Offshore and Arctic Engineering (2016)
- Tahar, A., "Hull", Mooring, Journal of Applied Ocean Research, pp.2003, 25(6)[DOI]
- Jung, D. H., "Vibration of Highly Flexible Free Hanging Pipe in Calm Water", Ocean Engineering, 32(14), pp.1726~1739 (2005)
- Wang, J., "Static Equilibrium Configuration of Deepwater Steel Lazy-wave Riser", Proceedings of 23th International Offshore and Polar Engineering Conference, 1, pp.995~998 (2013)
- Wang, J., "A Nonlinear Model for Deepwater Steel Lazy-wave Riser Configuration with Ocean Current and Internal Flow", Ocean Engineering, 94, pp.155~162 (2015)
- Yang, H. Z., "Sensitivity Analysis of Fatigue Life Prediction for Deep Water Steel Lazy Wave Catenary Risers", Science China Technological Science, 54, pp.1881~1887 (2011)
- 유광규, "Sensitivity Study on SCR Design for Spread-Moored FPSO in West Africa", 한국해양공학회지, 31(2), pp.111~120 (2017), 한국해양공학회