해양 라이저의 부력재 최적 배치를 위한 시뮬레이션 기반 설계 기법에 관한 연구
A Study on the Simulation-based Design for Optimum Arrangement of Buoyancy Modules in Marine Riser System
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This paper reports a simulation-based design method for the optimized arrangement design of buoyancy modules in a marine riser system. A buoyancy module is used for the safe operation and structural stability of the riser. Engineers design buoyancy modules based on experience and experimental data. However, they are difficult to design because of the difficulty of conducting real sea experiments and quantifying the data. Therefore, a simulation-based design method is needed to tackle this problem. In this study, we developed a simulation-based design algorithm using a multi-body dynamic simulation and genetic algorithm to perform optimization arrangement design of a buoyancy module. The design results are discussed in this paper.
Abstract
This paper reports a simulation-based design method for the optimized arrangement design of buoyancy modules in a marine riser system. A buoyancy module is used for the safe operation and structural stability of the riser. Engineers design buoyancy modules based on experience and experimental data. However, they are difficult to design because of the difficulty of conducting real sea experiments and quantifying the data. Therefore, a simulation-based design method is needed to tackle this problem. In this study, we developed a simulation-based design algorithm using a multi-body dynamic simulation and genetic algorithm to perform optimization arrangement design of a buoyancy module. The design results are discussed in this paper.
참고문헌 (22)
- Alessandri, A, "System Control Design of Autopilot and Speed Pilot for a Patrol Vessel by Using LMIs", Towards Green Marine Technology and Transport, pp.577~583 (2015)
- Altosole, M, "Real-time Simulation of a COGAG Naval Ship Propulsion System. Proceedings of the Institution of Mechanical Engineers", Part M: Journal of Engineering for the Maritime Environment, 223(1), pp.47~62 (2009)
- Atadan, A. S, "Analgytical and Numerical Anallysis of the Dynamics of a marine Riser Connected to a Floating Platform", Ocean Engineering, 24(2), pp.111~131 (1997)
- Cang, V. T, "3D Simulation-based Support Systems in PLM Solution for Offshore and Marine Industry", Marine Engineering Frontiers, 1(4), pp.82~89 (2013)
- Cha, J. H, "Dynamic Response Simulation of a Heavy Cargo Suspended by a Floating Crane Based on Multibody System Dynamics", Ocean Engineering, 37, pp.1273~1291 (2010)
- Halil, D, "Riser Concepts for Deep Waters", pp.2012
- Havard, M, "Simulation-Based Optimization of Lattice Support Structures for Offshore Wind Energy", pp.2012
- Holland, J.H, "Adaptation in Natural and Artificial System" (1975), University of Michigan Press
- Hong, S, "Dreidimensionale Nichtlineare Statische und Dynamische Analyse von Flexiblen Rohrleitungen im Seegang", pp.1992
- Jin, G.G, "Genetic Algorithms and Their Applications" (2010), Kyowoo
- 정동호, "수치해석적 방법을 통한 해양심층수 취수용 유연 라이저의 거종 해석에 관한 연구", 한국해양공학회지, 18(4), pp.15~22 (2004), 한국해양공학회
- Ku, N, "Crane Modeling and Simulation in Offshore Structure Building Industry", International Journal of Computer Theory and Engineering, 6(3), pp.278~284 (2014)
- Lee, J. G, "Simulation-based design(SBD)Technology", Bulletin of the Society of Naval Architects of Korea, 38(1), pp.47~53 (2001)
- 이정무, "CFD 화재 시뮬레이션을 이용한 여객선 제연설비의 성능기반 설계 사례", 대한조선학회 논문집, 47(3), pp.454~461 (2010), 대한조선학회
- 오재원, "A study of the kinematic characteristic of a coupling device between the buffer system and the flexible pipe of a deep-seabed mining system", International Journal of Naval Architecture and Ocean Engineering, 6(3), pp.652~669 (2014), 대한조선학회
- 오재원, "심해저 채광 시스템에서 유연관의 안정적인 운용을 위한 부력재 배치 설계", Ocean and Polar Research, 37(2), pp.119~125 (2015), 한국해양과학기술원[DOI]
- 박규식, "OrcaFlex를 이용한 심해 SCR 구조 해석", 한국해양공학회지, 29(1), pp.16~27 (2015), 한국해양공학회
- Sohn, S. J, "Simulation Based Design of an Automated Hull-piece Manufacturing System", Journal of the Society of Naval Architects of Korea, 36(4), pp.128~136 (1999)
- Song, C, "Sequential Design of Experiment Based Topology Optimization", Journal of Society of Information Storage Systems, 3(4), pp.178~182 (2007)
- Song, K, "Simulation-Based Optimization Methodology for Offshore Natural Gas Liquefaction Process Design", Industrial & Engineering Chemistry Research, 53(13), pp.5539~5544 (2014)
- Virtual Motion, "DAFUL User's Manual", Virtual Motion, Inc, ~ (2015)
- Wang, L, "Rigid Dynamic Performance Simulation of an Offshore Pipline Plough", Ocean Engineering, 94, pp.51~66 (2015)