유압 피스톤 펌프 소재의 마모 특성에 관한 연구
A Study on Wear Property of Oil Hydraulic Piston Pump Material
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Oil hydraulic piston pumps are being extensively used in the world, because of simple design, light weight and effective cost etc. An oil hydraulic pump is likely to have serious problems of high leakage, friction and low energy efficiency according to large time use. In the oil hydraulic piston pumps the clearance between the valve block and piston plays an important role for volumetric and overall efficiency. In this paper, the wear property of the SACM645 material used the hydraulic piston pump has been work out by experimentation with variable heat treatment. To investigate the effect according to the piston surface condition, seven different types specimen were prepared. From the wear test results, induction hardening and nitration were definitely superior to the others. On the whole, nitration was estimated for high strength material to wear resistance.
Abstract
Oil hydraulic piston pumps are being extensively used in the world, because of simple design, light weight and effective cost etc. An oil hydraulic pump is likely to have serious problems of high leakage, friction and low energy efficiency according to large time use. In the oil hydraulic piston pumps the clearance between the valve block and piston plays an important role for volumetric and overall efficiency. In this paper, the wear property of the SACM645 material used the hydraulic piston pump has been work out by experimentation with variable heat treatment. To investigate the effect according to the piston surface condition, seven different types specimen were prepared. From the wear test results, induction hardening and nitration were definitely superior to the others. On the whole, nitration was estimated for high strength material to wear resistance.
참고문헌 (16)
- 김경호, "등속조인트를 적용한 사판식 유압 모터", 점프의 로드형 피스톤에 대한 운동해석, 2005, pp.2, 1~8
- 김종기, "유압피스톤 펌프의 피스톤 마모에 대한 표면경도의 영향", 한국윤활학회 학술대회, 통권 : 33, pp.340~345 (2001)
- 유압피스톤펌프·모터의 피스톤과 실린더 사이의 윤활해석, 기초과학연구사업 보고서, "박태조", ~ (1997)
- 박태조, "유압 피스톤 펌프의 피스톤 펌프의 피스톤과 실린더 사이의 윤활해석 제2보: 피스톤의 왕복운동에 의한 영향", 윤활학회지, 17(6), pp.435~440 (2001)
- 박태조, "유압 피스톤 펌프의 피스톤과 실린더 사이의 윤활해석 제1보: 피스톤 형상에 의한 영향", 한국윤활학회지, 14, pp.64~69 (1998)
- 박태조, "사판식 유압 피스톤 펌프에서의 윤활해석", 대한기계학회 추계학술대회논문집, pp.962~967 (1999)
- 백일현, "유압 피스톤 펌프의 실린더블록에 대한 거동특성", 자동화기술, 22(9), pp.83~87 (2006)
- 안석환, "0.2% N을 첨가한 수퍼 2상 스테인리스강의 열처리 조건에 따른 특성 평가 - 제1보: 기계적 특성 및 미세조직", 한국해양공학회지, 22(4), pp.46~50 (2008), 한국해양공학회
- 안석환, "용접열사이클 재현에 의한 SS400강 및 STS304강의 특성 평가- 제1보: 기계적 특성 및 조직", 한국해양공학회지, 19(6), pp.64~71 (2005), 한국해양공학회
- 정재연, "유압 피스톤 펌프의 실린더 블록과 밸브 플레이트 사이의 유막 특성", 유공압시스템학회논문집, 1, pp.8~14 (2004)
- 함영복, "유압 피스톤 펌프", 모터의 동력 변환 메카니즘에 대한 고찰, 2004, pp.1, 478~56
- Ezato, M., "Sliding Friction Characteristics between a Piston and a Cylinder for Starting and Low-speed Conditions in the Swashplate Type Axial Piston Motor", Proc. of 7th Int. Fluid. Power Sympo., pp.29~37 (1986)
- Gommed, K., "Dynamic Analysis of Gas Lublicating Ringless Pistons - Basic Modeling", J. of Tribology, 115, pp.207~213 (1993)
- Li, D.F., "An Automotive Piston Lubrication Model", ASLE Trans., 26, pp.151~160 (1982)
- Meikandan, N., "Theoretical Analysis of Tapered Pistons in High Speed Hydraulic Actuators", WEAR, 137, pp.299~321 (1990)
- Zhu, D., "Hamai, K.8. A Numerical Analysis for Piston Skirts in Mixed Lubrication - Part I : Basic Modeling", J. of Tribology, 114, pp.553~56 (1992)