유압 서보실린더의 동합금 피스톤 헤드와 부시의 마멸특성에 관한 실험적 연구
A Experimental Study on Wear Characteristics of Cu Alloy for Piston Head and Bush Material of Hydraulic Servo Cylinder
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Hydraulic servo cylinders have been used to control accurately a large machine in power plant. Especially, Piston head and bush of servo cylinder is assembled sleeve and piston head and bush made of Cu alloy and pad sealing part. A damages of sleeve and piston head, bush are caused by friction and wear. Thus, It is necessary to examine friction and wear characteristics of Cu alloys for the piston head and bush. In this study, to be reliable on the piston and cylinder parts, dry friction and wear experiments were carried out with Cu alloys of four kinds of AlBC, PBC, BC and BS using reciprocating friction tester of pin on disk type. From this study, the result was shown that the AlBC and PBC with alloy elements were excellent to resistance wear. As the sliding speed was increased, the wear loss of PBC decreased than another Cu alloy.
Abstract
Hydraulic servo cylinders have been used to control accurately a large machine in power plant. Especially, Piston head and bush of servo cylinder is assembled sleeve and piston head and bush made of Cu alloy and pad sealing part. A damages of sleeve and piston head, bush are caused by friction and wear. Thus, It is necessary to examine friction and wear characteristics of Cu alloys for the piston head and bush. In this study, to be reliable on the piston and cylinder parts, dry friction and wear experiments were carried out with Cu alloys of four kinds of AlBC, PBC, BC and BS using reciprocating friction tester of pin on disk type. From this study, the result was shown that the AlBC and PBC with alloy elements were excellent to resistance wear. As the sliding speed was increased, the wear loss of PBC decreased than another Cu alloy.
참고문헌 (8)
- 원전기술 발전 방안, "산업자원부", ~ (2006)
- S. H. Kyung, "Cu and Cu Alloy Castings", Journal of KFS, 8(1), pp.132~142 (1988)
- J. G. Kim, "Mechanical Materials Engineering", pp.320~334 (2008), Munun dang
- Peter J. B, "Lubrication and Wear Technology", ASM Handbook, 18, pp.237~ (1992)
- D. Y. Chung, "The Effects of Ni Addition in Cu Base Sintered Friction Material-Microstructure and Tribological Behavior", Journal of the KSTLE, 11(5), pp.55~58 (1995)
- 김정규, "기계재료학", pp.330~331 (2005), 문운당
- W.H. Cubberly, "Nonferrous Alloys, Metal handbook, Ninth Edition, vol. 2", pp.241~242 (1979)
- 박흥식, "기계재료공학", pp.150~ (2001)