Alloy718 마찰용접 후열처리재의 비커스 경도의 통계적 성질
Statistical Properties of Vickers Hardness of Post Weld Heat Treated Friction Welded Parts in Alloy718
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The objective of this paper is to investigate the statistical properties of Vickers hardness (HV) for friction welded parts in a Ni-based super alloy (Alloy718). In the case of post weld heat treatment (PWHT) parts, hardness tests were repeated for three different applied loads, 100, 200, and 300 g, with a duration time of 10 seconds. The arithmetic means of the Vickers hardness in heat affected zone (HAZ) materials were smaller than those of the base metal (BM) in all of the applied loads. The coefficient of variation (COV) for the BM and HAZ decreased by increasing the applied load. The probability distribution of the Vickers hardness followed the Weibull distribution well. The distribution of the Vickers hardness was not found to be symmetric. The shape parameter and scale parameter increased by increasing the applied load at both the BM and HAZ.
Abstract
The objective of this paper is to investigate the statistical properties of Vickers hardness (HV) for friction welded parts in a Ni-based super alloy (Alloy718). In the case of post weld heat treatment (PWHT) parts, hardness tests were repeated for three different applied loads, 100, 200, and 300 g, with a duration time of 10 seconds. The arithmetic means of the Vickers hardness in heat affected zone (HAZ) materials were smaller than those of the base metal (BM) in all of the applied loads. The coefficient of variation (COV) for the BM and HAZ decreased by increasing the applied load. The probability distribution of the Vickers hardness followed the Weibull distribution well. The distribution of the Vickers hardness was not found to be symmetric. The shape parameter and scale parameter increased by increasing the applied load at both the BM and HAZ.
참고문헌 (10)
- 권상우, "Alloy718 마찰접합조건의 최적화와 비파괴 평가", 한국해양공학회지, 22(1), pp.53~57 (2008), 한국해양공학회
- 권혁용, "Alloy718 마찰용접재의 비커스 경도의 통계적 성질에 관한 연구 (As-welded 재의 경우를 중심으로)", 한국해양공학회지, 22(5), pp.87~98 (2008), 한국해양공학회
- 안근탁랑, "이론·응용 통계학" (1969), 양현당(일서)
- Lin, C.K., "Statistical Analysis of Microhardness Variation in Thermal Spray Coatings", J. Mater. Sci., 30, pp.111~117 (1995)
- Nelson, W., "Applied Life Data Analysis" (1982), John Wiley & Sons, Inc.
- Schneider, J.M., "Statistical Analysis of the Vickers Hardness", J. Mater. Sci., 262, pp.256~263 (1999)
- Valente, T., "Statistical evaluation of Vicker's Indentation Test Results for Thermally Sprayed Materials", Surface and Coatings Technology, 90, pp.14~20 (1997)
- Veprek, S., "On the Reliability of the Measurements of Mechanical Properties of Superhard Coatings", Materials Science and Engineering A, A340, pp.292~297 (2003)
- Weibull, W., "A Statistical Distribution Function of Wide Applicability", Journal of Applied Mechanics, 18, pp.293~297 (1951)
- Yanchev, I.Y., "Analysis of Microhardness Data in TIxln1-Se", Journal of Material Science, 30, pp.5576~5580 (1995)