해양 수송용 호스니플 제작을 위한 마찰용접 조건의 최적화
Optimization of Friction Welding Conditions for Production of Hose Nipple for Marine Transport
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, for the tube-to-tube friction welding of hose nipple materials, the main parameters of friction welding were investigated using tensile tests, Vickers hardness surveys of the bond area (HAZ), and observations of the microstructure to increase the quality of friction welding based on visual examination. As-welded and post weld heat treated (PWHT) specimens were tested. The optimal welding conditions were found to be n = 1000 rpm, HP = 10 MPa, UP = 15 MPa, HT = 9 s, and UT = 5 s when the metal loss (Mo) was 7.5 mm. Furthermore, the peak of the hardness distribution of the friction welded joints could be eliminated by PWHT. Moreover, the two materials of the friction weld were thoroughly mixed with a well-combined structure of micro-particles, without any molten material, particle growth, or defects.
Abstract
In this study, for the tube-to-tube friction welding of hose nipple materials, the main parameters of friction welding were investigated using tensile tests, Vickers hardness surveys of the bond area (HAZ), and observations of the microstructure to increase the quality of friction welding based on visual examination. As-welded and post weld heat treated (PWHT) specimens were tested. The optimal welding conditions were found to be n = 1000 rpm, HP = 10 MPa, UP = 15 MPa, HT = 9 s, and UT = 5 s when the metal loss (Mo) was 7.5 mm. Furthermore, the peak of the hardness distribution of the friction welded joints could be eliminated by PWHT. Moreover, the two materials of the friction weld were thoroughly mixed with a well-combined structure of micro-particles, without any molten material, particle growth, or defects.
참고문헌 (13)
- American Welding Society (AWS), "Recommended Practices for Friction Welding", ANSI, 1989, pp.1~89
- Irvinh, B, "Sparks Begin to Fly in Nonconventional Friction Welding and Surfacing", Welding Journal, 72(5), pp.37~40 (1993)
- Cho, H. S, "Friction Welding of Inconel 713C and SCM440", Journal of KWS, 15(6), pp.78~84 (1997)
- Jeong, H. S, "Fundamental and Basic Application of Friction Welding", Journal of KWS, 15(6), pp.1~12 (1997)
- Kang, S. B, "A Study on the Friction Weldability of Carbon Steel(S45C)to Aluminum Alloy(A6063)", Journal of the Korean Welding Society, 16(2), pp.57~63 (1998)
- 공유식, "수송차량 안전벨트용 모터축재의 마찰용접 최적화(1) - 기계적 특성 및 조직", 한국해양공학회지, 26(1), pp.64~69 (2012), 한국해양공학회
- 공유식, "굴삭기용 호스 니플의 마찰용접과 음향방출기법의 적용", 비파괴검사학회지, 33(5), pp.436~442 (2013), 한국비파괴검사학회[DOI]
- 공유식, "외경 36mm 강관의 관대관 마찰용접 특성과 공정 변수 최적화", 한국동력기계공학회지, 18(2), pp.50~56 (2014), 한국동력기계공학회[DOI]
- 공유식, "자동차 후진기어용 축재(SM 45C-SF 45)의 이종마찰용접 특성", 대한기계학회논문집 A, 34(1), pp.85~90 (2010), 대한기계학회
- 이배섭, "해양차량 쇽업소버용 강재의 이종 마칠용접과 AE평가", 한국해양공학회지, 19(1), pp.44~48 (2005), 한국해양공학회
- Mary, C, "Linear Friction Welding of IN718 Process Optimization and Microstructure Evolution", Advanced Materials Research, 15, pp.357~362 (2006)
- Oh, S. K, "A Study on Friction Welding of SM45C to SCM4 Steel Bars and the Fatigue Properties", Journal of Ocean Engineering and Technology, 2(2), pp.312~321 (1988)
- Suh, C. M, "A Study on Fatigue Strength in the Friction Welded Joints of HSS-Co to SM 55C Catbon Steel(1)", Transactions of the KSME A, 19(4), pp.918~928 (1995)