Alloy718 마찰용접재의 비커스 경도의 통계적 성질에 관한 연구 (As-welded 재의 경우를 중심으로)
A Study on Statistical Properties of Vickers Hardness of Friction Welded Parts in Alloy718 Steel (Part 1. As-welded)
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The objective of this paper is the investigation of the statistical properties of Vickers hardness (HV) of friction welded parts in nickel based super resisting steel, alloy 718 steel. First, we examine the statistical properties on the case of as-welded parts. Several Virkers indentations were made under same nominal conditions. This was repeated for three different applied loads, 100, 200 and 300g with a duration time, 10 second. The arithmetic mean of Vickers hardness in base metal (BM) materials is larger than that of HAZ in all applied loads. The measure of dispersion, that is, the coefficient of variation (COV) for BM and HAZ is decreased by increasing with the applied load. The distribution of Vickers hardness was not found to be symmetric type. The probability distribution of Vickers hardness was well followed Weibull distribution. The shape parameter and the scale parameter (characteristic hardness) are increased by increasing with the applied load, as both BM and HAZ.
Abstract
The objective of this paper is the investigation of the statistical properties of Vickers hardness (HV) of friction welded parts in nickel based super resisting steel, alloy 718 steel. First, we examine the statistical properties on the case of as-welded parts. Several Virkers indentations were made under same nominal conditions. This was repeated for three different applied loads, 100, 200 and 300g with a duration time, 10 second. The arithmetic mean of Vickers hardness in base metal (BM) materials is larger than that of HAZ in all applied loads. The measure of dispersion, that is, the coefficient of variation (COV) for BM and HAZ is decreased by increasing with the applied load. The distribution of Vickers hardness was not found to be symmetric type. The probability distribution of Vickers hardness was well followed Weibull distribution. The shape parameter and the scale parameter (characteristic hardness) are increased by increasing with the applied load, as both BM and HAZ.
참고문헌 (9)
- 권상우, "Alloy718 마찰접합조건의 최적화와 비파괴 평가", 한국해양공학회지, 22(1), pp.53~57 (2008), 한국해양공학회
- 재료강도확률모델연구회, "재료강도의 통계적 성질" (1992), 양현당
- 안근탁랑, "이론. 응용 통계학" (1969), 양현당
- Factor, M., "Vickers Microindentation of WC-12%Co Thermal Spray Coatings", Surface and Coating Technology, 132, pp.181~193 (2000)
- Lin, C.K., "Statistical Analysis of Microhardness Variations in Thermal Spray Coatings", J. Material Science, 30, pp.111~117 (1995)
- Nelson, W., "Applied Life Data Analysis" (1982), John Wiley & Sons, Inc.
- Schneider, J.M., "Statistical Analysis of the Vickers Hardness", Material Science and Engineering, A262, pp.256~263 (1999)
- Yanchev, I.Y., "Analysis of Microhardness Data in TIxln1-xSe", J. Material Science, 30, pp.5576~5580 (1995)
- Weibull, W., "A Statistical Distribution Function of Wide Applicability", Journal of Applied Mechanics, 18, pp.293~297 (1951)