STS316 용사코팅의 최적 공정 설계
Process Optimization of Thermal-sprayed STS316 Coating
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In the present study, process optimization for thermal-sprayed STS316 coating has been performed using L9(3 4) orthogonal array and analysis of variance (ANOVA). STS316 coatings were fabricated by flame spray process on steel substrate, and the hardness test and microstructure observation of the coatings were studied. The results of hardness test were analyzed by ANOVA. The ANOVA results showed that the spray distance had the greatest effect on hardness of the coating, on the other hands, the effects of oxygen gas flow and spray distance were ignorable. From these results, the optimal combination of the flame spray parameters could be derived, and confirmation experiment was carried out to verify these derived results. The calculated hardness of the coatings by ANOVA was found to approximately close to that of confirmation experimental result. Thus, it was considered that design of experiments using orthogonal array and ANOVA was effective for process optimization of thermal-sprayed STS316 coating.
Abstract
In the present study, process optimization for thermal-sprayed STS316 coating has been performed using L9(3 4) orthogonal array and analysis of variance (ANOVA). STS316 coatings were fabricated by flame spray process on steel substrate, and the hardness test and microstructure observation of the coatings were studied. The results of hardness test were analyzed by ANOVA. The ANOVA results showed that the spray distance had the greatest effect on hardness of the coating, on the other hands, the effects of oxygen gas flow and spray distance were ignorable. From these results, the optimal combination of the flame spray parameters could be derived, and confirmation experiment was carried out to verify these derived results. The calculated hardness of the coatings by ANOVA was found to approximately close to that of confirmation experimental result. Thus, it was considered that design of experiments using orthogonal array and ANOVA was effective for process optimization of thermal-sprayed STS316 coating.
참고문헌 (17)
- 어광준, "HVOF 용사에 의한 WC-CoCr 코팅 최적화를 위한 다구치 실험계획방법의 적용", 대한금속·재료학회지, 45(5), pp.292~299 (2007), 대한금속·재료학회
- 최경수, "실험계획법을 이용한 플라즈마 단열코팅에 관한 연구", 한국공업화학회, 6(5), pp.826~839 (1995)
- Åstrand, M, "Pvd- Al2O3-Coated Cemented Carbide Cutting Tools", Surface and Coatings Technology, 188, pp.186~192 (2004)
- Cooke, K, "Optimisation of the Electric Wire Arc-Spraying Process for Improved Wear Resistance of Sugar Mill Roller Shells", Surface & Coatings Technology, 202, pp.185~188 (2007)
- Davim,J.P, "Design of Optimisation of Cutting Parameters for Turning Metal Matrix Composites Based on the Orthogonal Arrys", J. Mater. Process. Technol, 132, pp.340~344 (2003)
- Dobrzański, L.A, "Erosion Resistance and Tribological Properties of Coatings Deposited by Reactive Magnetron Sputtering Method onto the Brass Substrate", Journal of Materials Processing Technology, 157, pp.317~323 (2004)
- Fang, W., "Processing Optimization, Surface Properties and Wear Behavior of HVOF Spraying WC–CrC–Ni Coating", J. Mater. Process. Technol, 209, pp.3561~3567 (2008)
- Ghosh, K, "Aluminum-Silicon Carbide Coating by Plasma Spraying", J. of Thermal Spray Technology, 7, pp.78~86 (1998)
- H. I. Lee, "Study on New Candidate Coating Materials to Challenge Rudder Cavitation Damage", CORROSION SCIENCE AND TECHNOLOGY, 7(5), pp.274~282 (2008), 한국부식방식학회
- Li, J.F, "Statistical Approach for Minimizing Cracks in Combined Flame Spraying and Laser Surface Modification of Refractory Ceramics", Journal of the European Ceramic Society, 563(2), pp.249~255 (2004)
- Lo, K.H, "Recent Developments in Stainless Steels", Materials Science and Engineering R, 65, pp.39~104 (2009)
- Mason, Robert L, "Statistical Design and Analysis of Experiments with Applications to Engineering and Science", pp.109~ (2003), A John Wiley & Sons Inc.
- Pierlot, C. P, "Design of Experiments in Thermal Spraying: a Review", Surface & Coatings Technology, 202, pp.4483~4490 (2008)
- Rotshtein, V.P, "Surface Modification and Alloying of Metallic Materials with Low-Energy High- Current Electron Beams", Surface and Coatings Technology, 180, pp.377~381 (2004)
- Santa, J.F, "Slurry Erosion of Thermal Spray Coatings and Stainless Steels for Hydraulic Machinery", Wear, 263, pp.258~264 (2007)
- Song, E.P, "Correlation of Microstructure With Hardness and Wear Resistance of Stainless Steel Blend Coatings Fabricated by Atmospheric Plasma Spraying", Materials Science and Engineering A, 429, pp.189~195 (2006)
- Yuping, W, "Cavitation Erosion Characteristics of a Fe–.Cr–.Si–.B–.Mn Coating Fabricated by High Velocity Oxy-Fuel (Hvof) Thermal Spray", Materials Letters, 61, pp.1867~1872 (2007)