Thermally Sprayed WC-Co 코팅층의 미세조직 및 특성
Microstructural Characteristics of Thermally Sprayed WC-Co Coatings
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The degree of WC decomposition and hardness of thermally sprayed WC-Co coatings are important factors determining the wear resistance of the coatings. In order to minimize the degree of decomposition and to increase hardness, the effects of processing parameters of high velocity oxyfuel (HVOF) spraying on various characteristics of nanostructured WC-12Co coating have been evaluated by an experimental design method. The HVOF sprayed WC-12Co coatings consisted of various carbide phases including WC, W2C and W3Co3C, with a much reduced carbon content. The degree of WC decomposition and decarburization was affected by changing barrel length and spray distance. The hardness of WC-Co coatings was strongly related to droplet temperature at substrate, and increased with increasing fuel addition and/or decreasing spray distance. The effective control of processing parameters was discussed in detail for manufacturing a high performance WC-Co coating.
Abstract
The degree of WC decomposition and hardness of thermally sprayed WC-Co coatings are important factors determining the wear resistance of the coatings. In order to minimize the degree of decomposition and to increase hardness, the effects of processing parameters of high velocity oxyfuel (HVOF) spraying on various characteristics of nanostructured WC-12Co coating have been evaluated by an experimental design method. The HVOF sprayed WC-12Co coatings consisted of various carbide phases including WC, W2C and W3Co3C, with a much reduced carbon content. The degree of WC decomposition and decarburization was affected by changing barrel length and spray distance. The hardness of WC-Co coatings was strongly related to droplet temperature at substrate, and increased with increasing fuel addition and/or decreasing spray distance. The effective control of processing parameters was discussed in detail for manufacturing a high performance WC-Co coating.
참고문헌 (13)
- D. A. Stewart, , Surf. Coat. Tech., 105, pp.13~ (1998)
- K. H. Baik, , Mater. Sci. Eng. A, 449, pp.846~ (2007)
- Jin-hong Kim, "Development and properties of nanostructured thermal spray coatings", Current Applied Physics, 6(6), pp.1002~1006 (2006), 한국물리학회
- Y. C. Zhu, , Ceram. Int., 27, pp.669~ (2001)
- Y. Qiao, , Surf. Coat. Tech., 172, pp.24~ (2003)
- H. J. Kim, , Mater. Sci. Eng. A, 391, pp.243~ (2005)
- 김선식, "투과전자현미경을 이용한 나노구조 WC-Co계 용사코팅층의 미세조직 연구", 대한금속·재료학회지, 43(3), pp.165~171 (2005), 대한금속·재료학회
- D. A. Stewart, , Acta Mater., 48, pp.1593~ (2000)
- B. H. Kear, , Scripta Mater., 44, pp.1703~ (2001)
- P. H. Shipway, , Wear., 259, pp.820~ (2005)
- C. Verdon, , Mater. Sci. Eng. A, 246, pp.11~ (1998)
- N. Belavendram, "Quality by Design" (1995), Prentice Hall
- K. H. Baik, , Acta Mater., 52, pp.199~ (2004)