HVOF 용사 코팅 공정 조건에 따른 코팅층의 기공도 예측
Porosity Prediction of the Coating Layer Based on Process Conditions of HVOF Thermal Spray Coating
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The effect of the process conditions of high-velocity oxygen fuel (HVOF) thermal spray coating on the porosity of the coating layer is investigated. HVOF coating layers are formed by depositing amorphous FeMoCrBC powder. Oxygen pressure varies from 126 to 146 psi and kerosene pressure from 110 to 130 psi. The Microstructural analysis confirms its porosity. Data analysis is performed using experimental data. The oxygen pressure-kerosene pressure ratio is found to be a key contributor to the porosity. An empirical model is proposed using linear regression analysis. The proposed model is then validated using additional test data. We confirm that the oxygen pressure-kerosene pressure ratio exponentially increases porosity. We present a porosity prediction model relationship for the oxygen pressure-kerosene pressure ratio.
Abstract
The effect of the process conditions of high-velocity oxygen fuel (HVOF) thermal spray coating on the porosity of the coating layer is investigated. HVOF coating layers are formed by depositing amorphous FeMoCrBC powder. Oxygen pressure varies from 126 to 146 psi and kerosene pressure from 110 to 130 psi. The Microstructural analysis confirms its porosity. Data analysis is performed using experimental data. The oxygen pressure-kerosene pressure ratio is found to be a key contributor to the porosity. An empirical model is proposed using linear regression analysis. The proposed model is then validated using additional test data. We confirm that the oxygen pressure-kerosene pressure ratio exponentially increases porosity. We present a porosity prediction model relationship for the oxygen pressure-kerosene pressure ratio.
참고문헌 (15)
- M. Oksa, , J. Therm. Spray Technol, 24, pp.205~ (2015)
- B. Wahlund, , Biomass Bioenergy, 26, pp.531~ (2004)
- N. A. S. Amin, , Waste Manage, 73, pp.256~ (2018)
- J. Jeon, , Metals, 11, pp.729~ (2021)
- C. Suryanarayana, , Int. Mater. Reviews, 58, pp.131~ (2013)
- S. Lee, , J. KWS, 21, pp.20~ (2003)
- 김송이, "기계적 합금화 공정에 의한 Hf계 비정질 분말의 미세변형거동 관찰", 한국분말재료학회지, 25(3), pp.246~250 (2018), 한국분말재료학회[DOI]
- B. H. Kear, , Scripta Mater, 44, pp.1703~ (2001)
- L. Zhao, , Wear, 257, pp.41~ (2004)
- 강연지, "고속 화염 용사 공정으로 제조된 WC계 및 Cr3C2계Cermet 코팅 소재의 미세조직 및 마모 특성", 한국분말재료학회지, 25(5), pp.408~414 (2018), 한국분말재료학회[DOI]
- B. -H. Kim, , J. KWS, 15, pp.126~ (1997)
- B. -H. Kim, , J. KWS, 15, pp.125~ (1997)
- T. S. Sidhu, , Mar. Technol. Soc. J, 39, pp.53~ (2005)
- L. Gil, , Thin Solid Films, 420–421, pp.446~ (2002)
- 조동율, "WC-Co 초고속 화염용사코팅 표면특성에 미치는 분말입자의 크기", 대한금속·재료학회지, 55(4), pp.227~231 (2017), 대한금속·재료학회[DOI]