용접변형에의 곡률의 영향에 관한 연구
On the Effect of Plate Curvature on Welding Deformation
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A simplified finite element analysis has been used to predict the weld-induced deformation to bead-on-plate welding of steel plates having curvatures in the welding direction. In this study, the equivalent loading method based on inherent strain was used to investigate the effect of longitudinal curvature on the weld-induced deformation of curved plates. Equivalent loads were derived from the inherent strain distribution around the weld line, and the loads were used for linear finite element analyses. These kinds of numerical simulations can, of course, be performed by using the rigorous thermalelastic-plastic analysis method. This approach is not, however, practical for use in weld-induced deformation analysis of large and complex structures, such as ship structures, in view of computing time and cost. The present equivalent load approach has been applied to several plate models having curvatures in the welding direction, and the results are compared with those obtained by thermal-elastic-plastic analysis and also with those obtained by the other simplified method found in reference. As far as the present results are concerned, the weld-induced deformation of curved plates can be accurately predicted by the method presented in this paper.
Abstract
A simplified finite element analysis has been used to predict the weld-induced deformation to bead-on-plate welding of steel plates having curvatures in the welding direction. In this study, the equivalent loading method based on inherent strain was used to investigate the effect of longitudinal curvature on the weld-induced deformation of curved plates. Equivalent loads were derived from the inherent strain distribution around the weld line, and the loads were used for linear finite element analyses. These kinds of numerical simulations can, of course, be performed by using the rigorous thermalelastic-plastic analysis method. This approach is not, however, practical for use in weld-induced deformation analysis of large and complex structures, such as ship structures, in view of computing time and cost. The present equivalent load approach has been applied to several plate models having curvatures in the welding direction, and the results are compared with those obtained by thermal-elastic-plastic analysis and also with those obtained by the other simplified method found in reference. As far as the present results are concerned, the weld-induced deformation of curved plates can be accurately predicted by the method presented in this paper.
참고문헌 (7)
- 용접강도연구위원회, "유한 요소해석을 이용한 Arc 용접부의 온도 분포 예측 표준화", 대한용접접합학회지, 23(6), pp.1~7 (2005), 대한용접접합학회
- 이상훈, "선상가열에 의한 변형에 곡률의 영향에 관한 연구", 2009년도 한국해양공학회 추계학술대회, pp.188~191 (2009), 한국해양공학회
- Goldak, J, "A New Finite Element Model for Welding Heat Sources", Metallurgical Transactions B, 15B, pp.299~305 (1984)
- 장창두, "선상가열 판변형 해석을 위한 고유변형도 영역의 결정법", 대한조선학회 논문집, 39(1), pp.9~89 (2002), 대한조선학회
- Jang, C.D, "A Study on the Prediction and Control of Welding Deformation of Ship Hull Blocks", J. of the Society of Naval Architects of Korea, 37(2), pp.127~136 (2000)
- Lee,C.H, "Prediction of Welding Deformation of Ship Hull Panel Blocks using Equivalent Loading Method Based on Inherent Strain", 박사, pp.2002
- Luo, Y, "Study on Welding Deformation of Plate with Longitudinal Curvature", Yosetsu Kozo Shinpojiumu Koen Ronbunshu, 1999, pp.311~317 (1999)