파랑관통형 고속 활주선 실선 성능 분석에 관한 연구
Study on Sea Trial Analysis of Wave Piercing High Speed Planing Boat
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study investigated the sea trial performance of a wave piercing high speed planing hull (WPH). The bow shape of the boat is sharp, and it has no chine or spray strip like a normal planing boat. The skeg is attached to the bottom of the boat in the longitudinal direction from the bow to the stern. The speed performance was analyzed as the speed dropped in a wave, and the seakeeping performance was compared with that of a planing boat with a similar velocity coefficient by measuring the vertical acceleration of the bow in the wave. The turning circle was compared with Lewandowski's estimation for a planing boat. As a result of this study, it was confirmed that the velocity drop of the developed WPH was not large in a wave, and the vertical acceleration was greatly reduced compared with that of a normal planing boat. The turning circle was somewhat larger than the estimated results for a planing boat, but the overall tendency was the same.
Abstract
This study investigated the sea trial performance of a wave piercing high speed planing hull (WPH). The bow shape of the boat is sharp, and it has no chine or spray strip like a normal planing boat. The skeg is attached to the bottom of the boat in the longitudinal direction from the bow to the stern. The speed performance was analyzed as the speed dropped in a wave, and the seakeeping performance was compared with that of a planing boat with a similar velocity coefficient by measuring the vertical acceleration of the bow in the wave. The turning circle was compared with Lewandowski's estimation for a planing boat. As a result of this study, it was confirmed that the velocity drop of the developed WPH was not large in a wave, and the vertical acceleration was greatly reduced compared with that of a normal planing boat. The turning circle was somewhat larger than the estimated results for a planing boat, but the overall tendency was the same.
참고문헌 (12)
- Calderon, A., "Theoretical and Experimental Investigation on Resistance of Transonic Hulls", Proceeding of 9th HSMV, pp.25~27 (2011)
- 정우철, "실적선 통계분석을 이용한 32피트급 레저보트 선형개발", 한국해양공학회지, 22(3), pp.58~63 (2008), 한국해양공학회
- 정우철, "30피트급 고속 알루미늄 레저보트 선형개발과 저항성능에 관한 연구", 한국해양공학회지, 26(6), pp.14~18 (2012), 한국해양공학회
- 정우철, "파랑관통형 고속활주선 선형개발에 관한 연구", 한국해양공학회지, 30(2), pp.69~74 (2016), 한국해양공학회
- Kihara, K., "A New Method of Initial Design for High Speed Craft(2)", Transition of West Japan Society of Naval Architecture, 72, pp.293~300 (1986)
- 김동진, "고속 활주선의 선형에 따른 저항 성능 및 규칙파 중 운동 성능 고찰", 대한조선학회 논문집, 51(5), pp.369~379 (2014), 대한조선학회
- Kwon, S. Y., "Study on Development of Control Fin of Longitudinal Position for High Speed Leisure Boat", Proceeding of KAOSTS, pp.1189~1192 (2012)
- Lewandowski, E.M, "The Dynamics of Marine Craft (Manuevering and Seakeeping)" (2004), World Scientific Publishing Company
- Niwa, S., "Engineering of High Speed Boat(Resistance and Propulsion). A Foundation of Ship and Ocean(in Japanese)", ~ (2002)
- 서정화, "Model tests on resistance and seakeeping performance of wave-piercing high-speed vessel with spray rails", International Journal of Naval Architecture and Ocean Engineering, 8(5), pp.442~455 (2016), 대한조선학회
- Thompson, A., "U.S. Patent No. 6116180. United States Patent and Trademark Office", ~ (1997)
- 윤현규, "RIB형 표적정의 수평면 조종운동 간략모델", 대한조선학회 논문집, 44(6), pp.572~578 (2007), 대한조선학회