파랑관통형 선형의 저항 및 트림각 감소를 위한 선미 인터셉터 부착효과에 관한 모형시험 연구
A Model Test Study on the Effect of the Stern Interceptor for the Reduction of the Resistance and Trim Angle for Wave-piercing Hulls
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Planing hull form is widely used as a high speed vessel hull. There is a problem of the planing hull not solved yet. The problem is that the planing hull has very large vertical acceleration and large heave and pitch motions. As one method for overcoming this problem, there is "wave-piercing hull". Before the motion in waves is investigated, the resistance and running attitude must be investigated. In this paper, the running attitude and resistance of two wave-piercing hulls are investigated by model tests. Model test results show that the wave-piercing hulls have large trim angle and sinkage at the high speed, so additional model tests are conducted by using the hull appended by stern interceptor that is very thin plate to increase the hydrodynamic pressure at the attached location. The results are compared with other planing hulls and the resistance components and the hydrodynamic force are discussed. From the model test results, it can be known that the stern interceptor is the effective appendage for the reduction of the resistance and trim angle of wave-piercing hull.
Abstract
Planing hull form is widely used as a high speed vessel hull. There is a problem of the planing hull not solved yet. The problem is that the planing hull has very large vertical acceleration and large heave and pitch motions. As one method for overcoming this problem, there is "wave-piercing hull". Before the motion in waves is investigated, the resistance and running attitude must be investigated. In this paper, the running attitude and resistance of two wave-piercing hulls are investigated by model tests. Model test results show that the wave-piercing hulls have large trim angle and sinkage at the high speed, so additional model tests are conducted by using the hull appended by stern interceptor that is very thin plate to increase the hydrodynamic pressure at the attached location. The results are compared with other planing hulls and the resistance components and the hydrodynamic force are discussed. From the model test results, it can be known that the stern interceptor is the effective appendage for the reduction of the resistance and trim angle of wave-piercing hull.
참고문헌 (21)
- Alexander, H.D., "An Experimental Study of Interceptors for Drag Reduction on High-performance Sailing Yachts", Ocean Engineering, 38(8), pp.983~994 (2011)
- Bouscasse, B., "Experimental Investigation of a Fast Catamaran in Head Waves", Ocean Engineering, 72(1), pp.318~330 (2013)
- Brizzolara, S., "Hydrodynamics of interceptors : a fundamental study", Proceedings ICMRT 2005, International Conference on Maritime Research and Transportation (2005)
- Clement E.P., "Resistance Tests of Systematic Series of Planing Hull Forms", Transactions of the SNAME, 71, pp.491~579 (1963)
- Dong, W.C., "Experimental Study on the Form and The Performance of High Speed and Light Displacement Wave Piercing Catamaran", Journal of Ship Mechanics, 12(3), pp.199~207 (2008)
- Systematic Study of The Rough-Water Performance of Planing boats. Davidson Laboratory Report, "Fridsma G.", Stevens Institute of Technology, ~ (1969)
- A Systematic Study of The Rough-Water Performance of Planing boats (irrehullar waves-partⅡ), "Fridsma, G.", Davidson Laboratory, Stevens Institute of Technology, ~ (1971)
- ITTC, "Report of panel on high-speed marine vehicles", Proceedings of the 16th ITTC, pp.583~624 (1981), Leningrad USSR
- Keuning, J.A., "The effect of bow shape on the seakeeping performance of a fast monohull", 6th International Conference on Fast Sea Transportation (FAST 2001), pp.197~213 (2001)
- 김동진, "활주선의 하중 및 무게 중심 위치 변화가 항주 자세에 미치는 영향에 대한 연구", 대한조선학회 논문집, 46(3), pp.335~342 (2009), 대한조선학회
- 김동진, "정면 규칙파 중 활주형 고속선의 운동 응답에 대한 실험적 연구", 대한조선학회 논문집, 46(4), pp.373~381 (2009), 대한조선학회
- 김동진, "선미 규칙파 중 고속 활주선의 연직면 운동에 대한 실험적 연구", 대한조선학회 논문집, 47(4), pp.496~507 (2010), 대한조선학회
- Kim, D. J., "A study on the running attitude and dynamic stability of a semi-displacement round bilge vessel at high speed", Ph.D, pp.2012
- 김동진, "40ft 급 크루즈 레저보트의 운동성능 해석 및 모형시험 비교 연구", 대한조선학회 논문집, 50(4), pp.240~247 (2013), 대한조선학회
- 김동진, "Design of high-speed planing hulls for the improvement of resistance and seakeeping performance", International Journal of Naval Architecture and Ocean Engineering, 5(1), pp.161~177 (2013), 대한조선학회
- 김동진, "고속 활주선의 선형에 따른 저항 성능 및 규칙파 중 운동 성능 고찰", 대한조선학회 논문집, 51(5), pp.369~379 (2014), 대한조선학회
- Park, H. S., "The effects of appendages on running attitudes and course-keeping ability of waterjet propelled high-speed vessel", Master, pp.2011
- Savitsky, D., "Hydrodynamic Design of Planing Hull", Marine Technology, 1(1), pp.71~96 (1964)
- Savitsky, D., "Procedures for Hydrodynamic Evaluation of Planing Hulls in Smooth and Rough Water", Marine Technology, 13(4), pp.381~400 (1976)
- Savitsky, D., "Inclusion of Whisker Spray Drag in Performance Prediction Method for High-Speed Planing Hulls", Marine Technology, 44(1), pp.35~56 (2007)
- Savitsky, D., "The effect of bottom warp on the performance of planing hulls", Proceeding of 3rd Chesapeake Powerboat Symposium, pp.1~40 (2012)