전자선을 이용한 아크릴산 그라프트 케냐프 섬유의 제조 및이를 이용한 케냐프 섬유보강 시멘트의 투수특성 평가
Preparation of Acrylic Acid-grafted Kenaf Fibers Using E-beam Irradiation and Evaluation of Permeability of Kenaf Fiber-cement Composites
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The kenaf is quickly developing as a renewable resource. Kenaf can be grown under awide range of weather conditions. Modification of kenaf fiber by graft polymerization provides asignificant route to alter the chemical properties, including surface hydrophilicity or hydrophobicity. In this study, kenaf fiber surfaces were grafted with acrylic acid as a hydrophilic groupusing electron beam irradiation. The grafting rate increased with an increase in grafting time. The FT-IR results confirmed that acrylic acid was successfully grafted onto the kenaf fibers. Thewettability of the kenaf fiber was increased, accompanied by acylic acid grafting on the fiber surface. According to the permeability test result, it was found that acrylic acid grafted kenaf fiberreinforced cement composite was more reduced than non-grafted kenaf fiber reinforced cementcomposite.
Abstract
The kenaf is quickly developing as a renewable resource. Kenaf can be grown under awide range of weather conditions. Modification of kenaf fiber by graft polymerization provides asignificant route to alter the chemical properties, including surface hydrophilicity or hydrophobicity. In this study, kenaf fiber surfaces were grafted with acrylic acid as a hydrophilic groupusing electron beam irradiation. The grafting rate increased with an increase in grafting time. The FT-IR results confirmed that acrylic acid was successfully grafted onto the kenaf fibers. Thewettability of the kenaf fiber was increased, accompanied by acylic acid grafting on the fiber surface. According to the permeability test result, it was found that acrylic acid grafted kenaf fiberreinforced cement composite was more reduced than non-grafted kenaf fiber reinforced cementcomposite.
참고문헌 (14)
- 박승범, "폴리프로필렌 섬유보강콘크리트의 역학적 특성 및 내구성에 관한 실험적 연구", 한국콘크리트학회 봄학술대회발표회 논문집, pp.293~298 (1998)
- Akil HM, "Kenaf fiber reinforced composites: A review", Mater. Des., 32, pp.4107~4121 (2011)
- Allain C, "A new method for contact-angle measurements of sessile drops", J. Colloid. Interface. Sci., 107, pp.5~13 (1985)
- Choi JI, "Comparison of gamma ray and electron beam irradiation on extraction yield, morphological and antioxidant properties of polysaccharides from tamarind seed", Radiat. Phys. Chem, 78, pp.605~609 (2009)
- Elsaid A, "Mechanical properties of kenaf fiber reinforced concrete", Constr. Build. Mater., 25, pp.1991~2001 (2011)
- Feng D, "Effect of compatibilizer on the structure-property relationships of kenaf-fiber", polypropylene composites, 2001, pp.22, 506~517
- Francis S, "Gamma radiation synthesis of rapid swelling superporous polyacrylamide hydrogels", Radiat. Phys. Chem., 78, pp.951~953 (2009)
- Hong KH, "UV-induced graft polymerization of acrylamide on cellulose by using immobilized benzophenone as a photo-initiator", Eur. Polym. J., 45, pp.2443~2449 (2009)
- Khalil HPSA, "Cell wall ultrastructure, anatomy, lignin distribution, and chemical composition of Malaysian cultivated kenaf fiber", Ind. Crop. Prod., 31, pp.113~121 (2010)
- Kim MT, "Study on an oxygen plasma treatment of a basalt fiber and its effect on the interlaminar fracture property of basalt", epoxy woven composites, 2011, pp.42, 399~404
- Soroushian P, "Evaluation of normal-weight and light-weight fillers in extruded cellulose fiber cement products", Cem. Concr. Compos., 28, pp.69~76 (2006)
- Vickers PE, "The surface chemistry and acid-base properties of a PANbased carbon fibre", Carbon, 38, pp.675~689 (2000)
- Wang JY, "Effect of shrinkage reducing admixture on flexural behaviors of fiber reinforced cementitious composites", Cem. Concr. Compos., 34, pp.443~450 (2012)
- Zhao ZP, "Nanofiltration membrane prepared from polyacrylonitrile ultrafiltration membrane by low-temperature plasma I. Graft of acrylic acid in gas", J. Membr. Sci., 232, pp.1~8 (2004)