Fabrication of surveyed crown and frameworks for removable partial dentures using electronic surveying
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
CAD/CAM technology is increasingly being used for the fabrication of various prostheses. Digitized attempts are also underway for both removable partial dentures as well as fixed partial dentures. Conventional methods to fabricate removable partial denture require innumerable laboratory procedures, such as impression, surveying, blockout, making fire model, and wax-up. In this paper, we demonstrate the process using electronic surveying and blockout in Sensable’s intellifitTM Digital restoration system, and zirconia surveyed crown and framework fabrication through the digital process. The clinical application of digital systems in the dental field is expected to increase with the advancement and development of technology in the near future.
Abstract
CAD/CAM technology is increasingly being used for the fabrication of various prostheses. Digitized attempts are also underway for both removable partial dentures as well as fixed partial dentures. Conventional methods to fabricate removable partial denture require innumerable laboratory procedures, such as impression, surveying, blockout, making fire model, and wax-up. In this paper, we demonstrate the process using electronic surveying and blockout in Sensable’s intellifitTM Digital restoration system, and zirconia surveyed crown and framework fabrication through the digital process. The clinical application of digital systems in the dental field is expected to increase with the advancement and development of technology in the near future.
참고문헌 (12)
- 김려운, "치과 디지털 인상의 이해와 적용", 대한치과재료학회지, 41(4), pp.253~261 (2014), 대한치과재료학회[DOI]
- R.J Williams, "A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying", The Journal of Prosthetic Dentistry, 91(1), pp.85~88 (2004), Elsevier BV[DOI]
- 홍용신, "전자 서베잉을 이용한 서베이드 금관과 국소의치 프레임워크 디자인", 대한치과보철학회지, 49(4), pp.354~361 (2011), 대한치과보철학회
- R.J. Williams, "Use of CAD", CAM technology to fabricate a removable partial denture framework, 2006, pp.96(2), 96~99[DOI]
- Eggbeer D, "The computer-aided design and rapid prototyping fabrication of removable partial denture frameworks", Proc Inst Mech Eng H, 219, pp.195~202 (2005)
- Bibb RJ, "Trial fitting of a remobable partial denture framework made using computer-aided design and rapid prototyping techniques", Proc Inst Mech Eng H, 220, pp.793~797 (2006)
- Richard van Noort, "The future of dental devices is digital", Dental Materials, 28(1), pp.3~12 (2012), Elsevier BV[DOI]
- 백장현, "Fabrication of a CAD", CAM monolithic zirconia crown to fit an existing partial removable dental prosthesis, 2016, pp.8(4), 329~332[DOI]
- 이선기, "An alternative method to convert fractured metal ceramic surveyed crown into a complete contour zirconia surveyed crown using CADCAM technology under anticancer treatments: a clinical report", 구강회복응용과학지, 31(1), pp.45~49 (2015), 대한턱관절교합학회[DOI]
- 박지만, "디지털 국소의치의 구강 내 적합도와 캐드 디자인 간의 비교연구", 생체재료학회지, 16(3), pp.102~107 (2012), 한국생체재료학회
- Pham DT, "A comparison of rapid prototyping technologies", Int J Mach Tool Manuf, 38, pp.1257~1287 (1998)
- I. Yadroitsev, "Parametric analysis of the selective laser melting process", Applied Surface Science, 253(19), pp.8064~8069 (2007), Elsevier BV[DOI]