CAD/CAM 시스템을 이용한 가철성 보철 수복
The removable prosthetic restorations utilizing CAD/CAM system
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Recently, the digital solution of fabricating removable prosthesis by applying haptic input device, electronic surveying, and rapid prototyping was introduced. This review article covers the concept of electronic surveying, computer-aided denture framework designing procedure, discussions after several digital denture cases, directions of future development, such as digital tooth arrangement and RP flasking.
Abstract
Recently, the digital solution of fabricating removable prosthesis by applying haptic input device, electronic surveying, and rapid prototyping was introduced. This review article covers the concept of electronic surveying, computer-aided denture framework designing procedure, discussions after several digital denture cases, directions of future development, such as digital tooth arrangement and RP flasking.
참고문헌 (15)
- Fasbinder DJ, "Clinical performance of chairside CAD", CAM restorations, 2006, pp.137, 22~31
- Syrek A, "Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling", J Dent, 38, pp.553~559 (2010)
- Han J, "A preliminary report of designing removable partial denture frameworks using a specifically developed software package", Int J Prosthodont, 23, pp.370~375 (2010)
- Eggbeer D, "The computeraided design and rapid prototyping fabrication of removable partial denture frameworks", Proc Inst Mech Eng H, 219, pp.195~202 (2005)
- Williams RJ, "A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying", J Prosthet Dent, 91, pp.85~88 (2004)
- Williams RJ, "Use of CAD", CAM technology to fabricate a removable partial denture framework, 2006, pp.96, 96~99
- Williams RJ, "CAD", CAM in the Fabrication of Removable Partial Denture Frameworks: A Virtual Method of Surveying 3D Scanned Dental Casts, 2004, pp.2, 268~276
- Bibb RJ, "Trial fitting of a removable partial denture framework made using computer-aided design and rapid prototyping techniques", ProcInstMechEng H, 220, pp.793~797 (2006)
- Pham DT, "A comparison of rapid prototyping technologies", Int J Mach Tool Manuf, 38, pp.1257~1287 (1998)
- Yadroitsev I, "Parametric analysis of the selective laser melting process", Appl Surf Sci, 253, pp.8064~8069 (2007)
- K Dai, "Thermal and stress modeling of multi-material laser processing", Acta Materialia, 49(20), pp.4171~4181 (2001)
- K Dai, "Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders", Acta Materialia, 52(1), pp.69~80 (2004)
- Akova T, "Comparison of the bond strength of lasersintered and cast base metal dental alloys to porcelain", Dent Mater, 24(10), pp.1400~1404 (2008)
- Kibi M, "Development of an RPD CAD system with finite element stress analysis", J Oral Rehabil, 36, pp.442~450 (2009)
- Sun Y, "Study on CAD&RP for removable complete denture", Comput Methods Programs Biomed, 93, pp.266~272 (2009)