상온대기압 질소 및 공기 플라즈마가 의치상용 레진의 표면 특성과 살균효과에 미치는 영향
Effect of non-thermal atmospheric pressure nitrogen and air plasma on the surface properties and the disinfection of denture base resin
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Objectives : The purpose of this study was to investigate the effect of non-thermal atmospheric pressure plasma jet(NTAPPJ) on surface properties and Streptococcus mutans disinfection of denture base resin. Methods : Self-cured denture base resin (Jet denture repair resin, Lang dental Mfg, co., USA) was used to make specimen(12 mm × 2 mm). To observe surface change before and after plasma process, surface roughness and contact angle were measured. For sterilization experiments, the surfaces of specimens were treated with nitrogen and air NTAPPJ for 1 minute after S. mutans was inoculated on the material surfaces. Results : Before plasma process, surface roughness of denture base resin was 0.21 ㎛ ± 0.02 ㎛. After air and nitrogen NTAPPJ process, surface roughness was 0.19 ㎛ ± 0.03 ㎛ and 0.18 ㎛ ± 0.01 ㎛ respectively. There was no significant difference(p>0.05). Contact angle of control group without plasma process was 83.81ﾟ ± 3.14ﾟ, while after plasma treatment, contact angles of air NTAPPJ and nitrogen NTAPPJ groups were 63.29ﾟ ± 2.27ﾟ and 46.68ﾟ ± 5.82ﾟ respectively. The result showed a significant decrease in contact angle after plasma process(p<0.05). Compared to the control group 6020.33(CFU/mL) without plasma process, CFU decreased significantly after air NTAPPJ 90.75(CFU/mL) and nitrogen NTAPPJ 80.25(CFU/mL) treatment(p<0.05). Conclusions : It was considered that NTAPPJ can be used for denture disinfection without changing surface properties of materials.
Abstract
Objectives : The purpose of this study was to investigate the effect of non-thermal atmospheric pressure plasma jet(NTAPPJ) on surface properties and Streptococcus mutans disinfection of denture base resin. Methods : Self-cured denture base resin (Jet denture repair resin, Lang dental Mfg, co., USA) was used to make specimen(12 mm × 2 mm). To observe surface change before and after plasma process, surface roughness and contact angle were measured. For sterilization experiments, the surfaces of specimens were treated with nitrogen and air NTAPPJ for 1 minute after S. mutans was inoculated on the material surfaces. Results : Before plasma process, surface roughness of denture base resin was 0.21 ㎛ ± 0.02 ㎛. After air and nitrogen NTAPPJ process, surface roughness was 0.19 ㎛ ± 0.03 ㎛ and 0.18 ㎛ ± 0.01 ㎛ respectively. There was no significant difference(p>0.05). Contact angle of control group without plasma process was 83.81ﾟ ± 3.14ﾟ, while after plasma treatment, contact angles of air NTAPPJ and nitrogen NTAPPJ groups were 63.29ﾟ ± 2.27ﾟ and 46.68ﾟ ± 5.82ﾟ respectively. The result showed a significant decrease in contact angle after plasma process(p<0.05). Compared to the control group 6020.33(CFU/mL) without plasma process, CFU decreased significantly after air NTAPPJ 90.75(CFU/mL) and nitrogen NTAPPJ 80.25(CFU/mL) treatment(p<0.05). Conclusions : It was considered that NTAPPJ can be used for denture disinfection without changing surface properties of materials.
참고문헌 (31)
- Ministry of Health & Welfare, "Ministry of health and welfare statistical year book 2013", pp.6~7 (2013), Ministry of Health & Welfare
- Korean national oral health survey 2010, "Ministry of Health & Welfare", Ministry of Health & Welfare, 481~488 (2010)
- Shay K, "Denture hygiene: a review and update", J Contemp Dent Pract, 1, pp.28~41 (2000)
- Sarin J, "Reducing the risk of aspiration pneumonia among elderly patients in long_term care facilities through oral health interventions", J Am Med Dir Assoc, 9, pp.128~135 (2008)[DOI]
- Mima EG, "Effectiveness of chlorhexidine on the disinfection of complete dentures colonised with fluconazoleresistant Candida albicans: in vitro study", Mycoses, 54, pp.506~512 (2011)[DOI]
- Ribeiro DG, "Denture disinfection by microwave irradiation: a randomized clinical study", J Dent, 37, pp.666~672 (2009)[DOI]
- 한석윤, "노인들의 의치 장착 기간과 의치 사후 관리에 영향을 주는 요인 -경북 농촌지역을 중심으로-", 대한치과기공학회지, 34(4), pp.433~455 (2012), 대한치과기공학회
- 강재경, "일부 세치제와 주방세제 사용에 의한 의치상 레진의 표면변화", 한국치위생학회지, 12(3), pp.611~620 (2012), 한국치위생학회[DOI]
- Budtz-Jørgensen E, "Materials and methods for cleaning dentures", J Prosthet Dent, 42, pp.619~623 (1979)
- Fridman G, "Applied plasma medicine", Plasma Process Polym, 5, pp.503~533 (2008)[DOI]
- De Geyter N, "Nonthermal plasma sterilization of living and nonliving surfaces", Annu Rev Biomed Eng, 14, pp.255~274 (2012)[DOI]
- Heo NS, "Microbial inactivation and pesticide removal by remote exposure of atmospheric air plasma in confined environments", J Biosci Bioeng, 117, pp.81~85 (2014)[DOI]
- Kim JH, "Plasma in dentistry: a review of basic concepts and applications in dentistry", Acta Odontol Scand, 72, pp.1~12 (2014)[DOI]
- Sladek RE, "Treatment of Streptococcus mutans biofilms with a nonthermal atmospheric plasma", Lett Appl Microbiol, 45, pp.318~323 (2007)
- Yamazaki H, "Microbicidal activities of low frequency atmospheric pressure plasma jets on oral pathogens", Dent Mater J, 30, pp.384~391 (2011)
- Choi YR, "Surface modification of biphasic calcium phosphate scaffolds by non-thermal atmospheric pressure nitrogen and air plasma treatment for improving osteoblast attachment and proliferation", THIN SOLID FILMS, 547, pp.235~240 (2013), ELSEVIER SCIENCE SA[DOI]
- 하정은, "일부 지역 노인의치보철사업 수혜자의 보철 전 후 구강건강관련 삶의 질 변화", 대한구강보건학회지, 33(2), pp.227~234 (2009), 대한예방치과·구강보건학회
- 이가령, "농촌지역 노인의 의치만족도", 농촌의학.지역보건, 35(1), pp.56~66 (2010), 한국농촌의학.지역보건학회
- Radford DR, "Denture plaque and adherence of Candida albicans to denture-base materials in vivo and in vitro", Crit Rev Oral Biol Med, 10, pp.99~116 (1999)
- Zamperini CA, "Adherence in vitro of Candida albicans to plasma treated acrylic resin. Effect of plasma parameters, surface roughness and salivary pellicle", Arch Oral Biol, 55, pp.763~770 (2010)[DOI]
- Rangel EC, "Investigation on the stability of plasma modified silicone surfaces", Plasmas Polym, 53, pp.221~226 (2004)
- Yoo EM, "Inhibition of streptococcus mutans biofilm formation by nitrogen based non-thermal atmospheric pressure plasma", 박사, pp.2014
- Rupf S, "Killing of adherent oral microbes by a non-thermal atmospheric plasma jet", J Med Microbiol, 59, pp.206~212 (2010)[DOI]
- Kim AY, "Radiation-induced cell lethality of salmonella typhimurium ATCC 14028: cooperative effect of hydroxyl radical and oxygen", Radiat Res, 144, pp.36~42 (1995)
- Gornitsky M, "A clinical and microbiological evaluation of denture cleansers for geriatric patients in long-term care institutions", J Can Dent Assoc, 68, pp.39~45 (2002)
- Dikbas I, "Investigation of the cleanliness of denture in a university hospital", Int J Prosthodont, 19, pp.294~298 (2006)
- 이재영, "민간의치세정제재들의 항균력, 정균력 및 의치상 마모력에 대한 평가", 대한구강보건학회지, 34(1), pp.18~27 (2010), 대한예방치과·구강보건학회
- de Freitas KM, "Weight loss of five commercially available denture teeth after toothbrushing with three different dentifrices", J Appl Oral Sci, 14, pp.242~246 (2006)
- Pisani MX, "Evaluation of the abrasiveness of dentifrices for complete dentures", J Prosthodont, 19, pp.369~373 (2010)[DOI]
- 노홍석, "교정용 아크릴릭 레진의 중합조건에 따른 모노머 용리", 대한소아치과학회지, 35(3), pp.477~486 (2008), 대한소아치과학회
- Kedjarune U, "Release of methyl methacrylate from heat-cured and autopolymerized resins: cytotoxicity testing related to residual monomer", Aust Dent J, 44, pp.25~30 (1999)