플렉서블 기반 미세 무연솔더 범프를 이용한 칩 접합 공정 기술
The Chip Bonding Technology on Flexible Substrate by Using Micro Lead-free Solder Bump
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
In electronics industry, the coming electronic devices will be expected to be high integration and convergence electronics. And also, it will be expected that the coming electronics will be flexible, bendable and wearable electronics. Therefore, the demands and interests of bonding technology between flexible substrate and chip for mobile electronics,e-paper etc. have been increased because of weight and flexibility of flexible substrate. Considering fine pitch for high density and thermal damage of flexible substrate during bonding process, the micro solder bump technology for high density and low temperature bonding process for reducing thermal damage will be required. In this study, we researched on bonding technology of chip and flexible substrate by using 25um Cu pillar bumps and Sn-Bi solder bumps were formed by electroplating. From the our study, we suggest technology on Cu pillar bump formation, Sn-Bi solder bump formation,and bonding process of chip and flexible substrate for the coming electronics.
Abstract
In electronics industry, the coming electronic devices will be expected to be high integration and convergence electronics. And also, it will be expected that the coming electronics will be flexible, bendable and wearable electronics. Therefore, the demands and interests of bonding technology between flexible substrate and chip for mobile electronics,e-paper etc. have been increased because of weight and flexibility of flexible substrate. Considering fine pitch for high density and thermal damage of flexible substrate during bonding process, the micro solder bump technology for high density and low temperature bonding process for reducing thermal damage will be required. In this study, we researched on bonding technology of chip and flexible substrate by using 25um Cu pillar bumps and Sn-Bi solder bumps were formed by electroplating. From the our study, we suggest technology on Cu pillar bump formation, Sn-Bi solder bump formation,and bonding process of chip and flexible substrate for the coming electronics.
참고문헌 (11)
- Players, "Organic Electronics Forecasts 2005-2015" (2005), IDTec
- R. H. Reuss, "Macroelectronics: Perspectives on Technology and Applications", Proc. IEEE, 93(7), pp.1239~ (2005)
- W. S. Wong, "Flexible Electronics, 1st Ed", pp.4~5 (2009), Springer
- 윤정원, "전자 패키징의 요소기술", 대한용접접합학회지, 23(2), pp.10~17 (2005), 대한용접접합학회
- S. K. Kang, "Lead (Pb)-Free Solders for Electronic Packaging", Journal of Electronic Materials, 23(8), pp.701~ (1994)
- M. Abtew, "Lead-free Solders in Microelectronics", Materials Science & Engineering R, 27(5), pp.95~ (2000)
- A. Sharif, "Comparative Study of Interfacial Reactions of Sn-Ag-Cu and Sn-Ag Solders on Cu Pads during Reflow Soldering", Journal of Electronic Materials, 34(1), pp.46~ (2005)
- J. Shen, "Research advances in nano composite solders", Microelectronics Reliability, 49(3), pp.223~ (2009)
- 김민영, "Cu Pillar 플립칩 접속부의 열 싸이클링 및 고온유지 신뢰성", 마이크로전자 및 패키징학회지, 17(3), pp.27~32 (2010), 한국마이크로전자및패키징학회
- 최정열, "Cu 범프와 Sn 범프의 접속구조를 이용한 RF 패키지용 플립칩 공정", 마이크로전자 및 패키징학회지, 16(3), pp.67~73 (2009), 한국마이크로전자및패키징학회
- W. M. Ki, "Joint Microstructures and Reliability of the Flexible Electronic Module with Flip Bonding Paramtetes", 석사, pp.2012