PCB 및 패키징 공정에서의 도금 시뮬레이션 기술 적용
Application of Plating Simulation for PCB and Pakaging Process
0
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
Electroplating technology is widely used in semiconductor microelectronic industry. With the development of semiconductor integrated circuit to high density and light-small scale, Extremely high quality and plated uniformity of the deposited metals are needed. Simulation technique can help to obtain better plating results. Although a few plating simulation softwares have been commercialized, plating simulation is not widely prevalent in Korea. In this paper, principle of electroplating and mathematical modeling of plating simulation are discussed. Also introduced are some cases enhancing plating thickness uniformity on leadframe, PCB and wafer by using plating simulation.
Abstract
Electroplating technology is widely used in semiconductor microelectronic industry. With the development of semiconductor integrated circuit to high density and light-small scale, Extremely high quality and plated uniformity of the deposited metals are needed. Simulation technique can help to obtain better plating results. Although a few plating simulation softwares have been commercialized, plating simulation is not widely prevalent in Korea. In this paper, principle of electroplating and mathematical modeling of plating simulation are discussed. Also introduced are some cases enhancing plating thickness uniformity on leadframe, PCB and wafer by using plating simulation.
참고문헌 (20)
- F. Druesne, "A New 3D Electroplating Simulation and Design Tool", Plating and surface finishing, 20 (2002)
- A. Chaudouet, "The use of boundary integral equation method in mechanical engineering", Second international conference on Applied Numerical Modelling (1978)
- F. Druesne, "Simulating electrochemical plating for corrosion protection", Corrosion Prevention and Control, 45, pp.118~ (1998)
- J. O'M. Bockris, "Modern Electrochemistry", pp.1~ (1973), Plemum Press
- J. Newman, "Electrochemical Systems, 2nd edition" (1991), Prentice-Hall
- G. A. Prentice, "A survey of numerical methods and solutions for current distribution problems", Journal of Electrochemical Society, 129, pp.72~ (1982)
- N. G. Zamani, "A survey of computational efforts in the field of corrosion engineering", International Journal For Numerical Methods in Engineering, 23, pp.1295~ (1986)
- G. Shi, "Flexural vibration and buckling analysis of orthotropic plates by the boundary element method", International Journal Solids Structures, 26(12), pp.1351~ (1990)
- Snyder D. L., "Electroplating nicke chromium for the automotive industry", Metal Finishing, 95(8), pp.29~ (1997)
- Celis J. P., "Composite coatings - new insights leading to improved process control", Transactions of the Institute of Metal Finishing, 75(3), pp.118~ (1997)
- C. T. J. Low, "Numerical simulation of the current, potential and concentration distributions along the cathode of a rotating cylinder Hull cell", Electrochimica Acta, 52(11), pp.3831~ (2007)
- P. Raffelstetter, "Modeling strategy for predicting current density distributions on PCBs and other complex patterned substrates", Jounal of the Electrochemical Society, 156(2), pp.51~ (2009)
- C. K. Lee, "Mathematical Modeling of Copper Plating with Pulsed Current", Journal of the Korean Institute of Surface Engineering, 24(3), pp.125~ (1991)
- Development of platform for electrochemical plating process simulation and optimization, "K. H. Lee", MOSF, 70~, pp.Research Report, No. 10033364 (2012)
- K. H. Lee, "Simulation of deposit thickness distribution and optimization of the Cu plating cell", ECWC Proceeding (2011)
- E. Yeager, "Comprehensive Treaise of Electrochemistry, Vol. 6" (1983)
- J. Newman, "Electrochemistry system", pp.378~ (1991), Prentice-Hall
- 정명원, "TSV 필링 공정에서 평활제가 구리 비아필링에 미치는 영향 연구", 마이크로전자 및 패키징학회지, 19(2), pp.55~59 (2012), 한국마이크로전자및패키징학회[DOI]
- 홍성철, "3차원 실장용 TSV 고속 Cu 충전 및 Non-PR 범핑", 마이크로전자 및 패키징학회지, 18(4), pp.49~53 (2011), 한국마이크로전자및패키징학회