ENEPIG 표면처리에서의 Sn-Ag-Cu 솔더조인트 신뢰성: 2. Pd 촉매 시간의 영향
Reliability of Sn-Ag-Cu Solder Joint on ENEPIG Surface Finish: 2. Effects of time of Pd activation
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
솔더조인트의 신뢰성에는 인쇄회로기판의 표면처리 특성이 많은 영향을 미치고 있다. 본 연구에서는ENEPIG 표면처리에서 Sn-4.0wt%Ag-0.5wt%Cu (SAC405) 솔더와 Pd 촉매 처리 시간에 따른 high speed shear 에너지및 파괴 모드를 연구하였다. 또한 Pd 촉매 처리 시간과 무전해 Ni-P 도금의 표면 거칠기 (Ra)와의 관계를 규명하였다. Pd촉매 처리 시간이 길어질수록 Ni-P nodule의 면적은 넓어지고, Ni-P 도금의 표면 거칠기 (Ra)는 감소한다. 이러한 영향으로 질산 기상 처리한 시편의 high speed shear 평가후 quasi-brittle과 brittle 모드의 점유율은 감소한다. 이는 Pd 촉매처리 시간의 증가가 SAC405 솔더조인트의 신뢰도를 향상시키는 역할을 한다는 것을 나타낸다.
Abstract
The reliability of solder joint is significantly affected by the property of surface finish. This paper reportson a study of high speed shear energy and failure mode for Sn-4.0wt%Ag-0.5wt%Cu (SAC405) solder joints with thetime of Pd activation. The nodule size of electroless Ni-P deposit increased with increasing the time of Pd activation. The roughness (Ra) of electroless Ni-P deposit decreased with increasing the time of Pd activation. Then, with HNO3vapor, the quasi-brittle and brittle mode of SAC405 solder joint decreased with increasing the time of Pd activation. Thisresults indicate that the increase in the Pd activation time for Electroless Ni/ Electroless Pd/ Immersion Au (ENEPIG)surface finish play a critical role for improving the robustness of SAC405 solder joint.
참고문헌 (25)
- D. Cullen, "A study on interfacial fracture phenomenon of solder joints formed using the electroless nickel", immersion gold surfaces finish, 2000, s03~
- 손윤철, "계면 화학반응과 무전해 니켈 금속층에서 나타나는 취성파괴와의 연관성에 관한 연구", 마이크로전자 및 패키징학회지, 12(1), pp.41~46 (2005), 한국마이크로전자및패키징학회
- Z. Mei, "Brittle interfacial fracture of PBGA packages on electroless Ni", immersion Au, 1998, 952~
- G.M. Wenger, "Case studies of brittle interfacial fractures in area array solder intercommnects", Proc. 26th International Symposium for testing and failure analysis, pp.355~ (2000)
- T. I. Eijim, "Assembly and reliability of thermally enhanced high I", O BGA packages, 1997, 25~
- J. W. Jang, "Morpholgy of interfacial reaction between lead-free solders and electroless Ni-P under bump metallization", J. Appl. Phys., 88(11), pp.6359~ (2000)
- D. Goyal, "Failure mechanism of brittle solder joint fracture in the presence of electroless Ni immersion gold (ENIG) interface", Proc. 52nd Electronic Component and Technology Conference, pp.732~ (2002)
- K. Zeng, "The root cause of black pad failure of solder joints with electroless Ni", immersion gold plating, 2006, 75~
- D. G. Lee, "New surface finish of the substrate for the flip chip packaging", SEMICON Korea 2007, pp.255~ (2007)
- Y. D. Jeon, "Thin electroless Cu", OSP on electroless Ni as a novel surface finish, 2006 (2006), 116~
- D. G. Lee, "New surface finish of the substrate for the flip chip packaging", SEMICON Korea 2007, pp.255~ (2007)
- R. Ramanauskas, "PCB failure analysis related to the ENIG black pad problem", Circuit World, 39(3), pp.124~ (2013)
- K. Suganuma, "The root causes of the black pad phenomenon and avoidance tactics", JOM, 60(6), pp.61~ (2008)
- M. O. Alam, "Reliability of BGA solder joints on the Au", Ni, IEEE Transaction on Device and Materials Reliability, pp.2006, 6(3)[DOI]
- 이지혜, "무전해 Ni-P 두께와 Assembly Process가 Solder Ball Joint의 신뢰성에 미치는 영향", 대한용접접합학회지, 32(3), pp.60~67 (2014), 대한용접접합학회
- A. Kumar, "Effect of Ni-P thickness on the tensile strength of Cu", Electroless Ni-P, 7th Electronics Packaging Technology Conference, pp.2005[DOI]
- K. Pun, "Effect of Ni layer thickness on intermetallic formation and mechanical strength of Sn-Ag-Cu solder joint", 10th Electronics Packaging Technology Conference, pp.487~ (2008), IEEE
- S. H. Huh, "A novel high speed shear test for lead free flip chip package, Electron", Mater. Lett., 8(1), pp.53~ (2012)
- W. L. Liu, "Growth behavior of Ni-P film on Fe", Si substrate in an acid electroless plating bath, 2008, pp.155(3), D192~
- D. K. Lee, "Influence of Doping on Ni Electroless Deposition at Single Crystalline Si", JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 158(8), pp.490~494 (2011), ELECTROCHEMICAL SOC INC
- J. W. Yoon, "Flip-chip bonding technology and reliability of electronic packaging", J. KWS, 25, pp.6~ (2007)
- S. S. Ha, "Thermo-mechanical reliability of lead-free surface mount assemblies for automobile application", J. KWS, 24, pp.21~ (2006)
- I. Platzman, "Oxidation of Polycrystalline copper thin films at ambient conditions", J. Phys. Chem. C., 112, pp.1101~ (2008)
- D. Tian, "A Pd-free activation method for electroless nickel deposition on copper", Surf. Coat. Techol., 228, pp.27~ (2013)
- P. H. Lo, "The electrochemical behavior of electroless plated Ni-P alloy in concentrated NaOH solution", Electrochem. Soc., 142(1), pp.91~ (1995)